Download or read book Optimisation of ZnO Thin Films written by Saurabh Nagar and published by Springer. This book was released on 2017-05-22 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes the different implantation mechanisms which can be used to achieve strong, reliable and stable p-type ZnO thin films. The results will prove useful in the field of optoelectronics in the UV region. This book will prove useful to research scholars and professionals working on doping and implantation of ZnO thin films and subsequently fabricating optoelectronic devices. The first chapter of the monograph emphasises the importance of ZnO in the field of optoelectronics for ultraviolet (UV) region and also discusses the material, electronic and optical properties of ZnO. The book then goes on to discuss the optimization of pulsed laser deposited (PLD) ZnO thin films in order to make successful p-type films. This can enable achievement of high optical output required for high-efficiency devices. The book also discusses a hydrogen implantation study on the optimized films to confirm whether the implantation leads to improvement in the optimized results.

Download or read book Nanotechnology for Energy and Environmental Engineering written by Lalita Ledwani and published by Springer Nature. This book was released on 2020-03-12 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the potential applications of nanoscience and nanotechnology to promote eco-friendly processes and techniques for energy and environment sustainability. Covering various aspects of both the synthesis and applications of nanoparticles and nanofluids for energy and environmental engineering, its goal is to promote eco-friendly processes and techniques. Accordingly, the book elaborates on the development of reliable, economical, eco-friendly processes through advanced nanoscience and technological research and innovations. Gathering contributions by researchers actively engaged in various domains of nanoscience and technology, it addresses topics such as nanoparticle synthesis (both top-down and bottom-up approaches); applications of nanomaterials, nanosensors and plasma discharge in pollution control; environmental monitoring; agriculture; energy recovery; production enhancement; energy conservation and storage; surface modification of materials for energy storage; fuel cells; pollution mitigation; and CO2 capture and sequestration. Given its scope, the book will be of interest to academics and researchers whose work involves nanotechnology or nanomaterials, especially as applied to energy and/or environmental sustainability engineering. Graduate students in the same areas will also find it a valuable resource.

Download or read book Data Driven Optimization of Manufacturing Processes written by Kalita, Kanak and published by IGI Global. This book was released on 2020-12-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: All machining process are dependent on a number of inherent process parameters. It is of the utmost importance to find suitable combinations to all the process parameters so that the desired output response is optimized. While doing so may be nearly impossible or too expensive by carrying out experiments at all possible combinations, it may be done quickly and efficiently by using computational intelligence techniques. Due to the versatile nature of computational intelligence techniques, they can be used at different phases of the machining process design and optimization process. While powerful machine-learning methods like gene expression programming (GEP), artificial neural network (ANN), support vector regression (SVM), and more can be used at an early phase of the design and optimization process to act as predictive models for the actual experiments, other metaheuristics-based methods like cuckoo search, ant colony optimization, particle swarm optimization, and others can be used to optimize these predictive models to find the optimal process parameter combination. These machining and optimization processes are the future of manufacturing. Data-Driven Optimization of Manufacturing Processes contains the latest research on the application of state-of-the-art computational intelligence techniques from both predictive modeling and optimization viewpoint in both soft computing approaches and machining processes. The chapters provide solutions applicable to machining or manufacturing process problems and for optimizing the problems involved in other areas of mechanical, civil, and electrical engineering, making it a valuable reference tool. This book is addressed to engineers, scientists, practitioners, stakeholders, researchers, academicians, and students interested in the potential of recently developed powerful computational intelligence techniques towards improving the performance of machining processes.

Download or read book Oxide Based Materials and Structures written by Rada Savkina and published by CRC Press. This book was released on 2020-05-07 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide-based materials and structures are becoming increasingly important in a wide range of practical fields including microelectronics, photonics, spintronics, power harvesting, and energy storage in addition to having environmental applications. This book provides readers with a review of the latest research and an overview of cutting-edge patents received in the field. It covers a wide range of materials, techniques, and approaches that will be of interest to both established and early-career scientists in nanoscience and nanotechnology, surface and material science, and bioscience and bioengineering in addition to graduate students in these areas. Features: Contains the latest research and developments in this exciting and emerging field Explores both the fundamentals and applications of the research Covers a wide range of materials, techniques, and approaches

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book Mesoporous Metal Oxide Films written by Emmanuel Topoglidis and published by MDPI. This book was released on 2021-01-20 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, entitled “Mesoporous Metal Oxide Films”, contains an editorial and a collection of ten research articles covering fundamental studies and applications of different metal oxide films. Mesoporous materials have been widely investigated and applied in many technological applications owing to their outstanding structural and physical properties. In this book, important developments in this fast-moving field are presented from various research groups around the world. Different preparation methods and applications of these novel and interesting materials have been reported, and it was demonstrated that mesoporosity has a direct impact on the properties and potential applications of such materials. The potential use of mesoporous metal oxide films and coatings with different morphology and structures is demonstrated in many technological applications, particularly chemical and electrochemical sensors, supercapacitors, solar cells, photoelectrodes, bioceramics, photonic switches, and anticorrosion agents.

Download or read book Sixteenth European Photovoltaic Solar Energy Conference written by H. Scheer and published by Routledge. This book was released on 2020-11-25 with total page 3235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Photovoltaic Solar Energy Conferences are dedicated to accelerating the impetus towards sustainable development of global PV markets. The 16th in the series, held in Glasgow UK, brought together more than 1500 delegates from 72 countries, and provided an important and vital forum for information exchange in the field. The Conference Proceedings place on record a new phase of market development and scientific endeavour in the PV industry, representing current and innovative thinking in all aspects of the science, technology, markets and business of photovoltaics. In three volumes, the Proceedings present some 790 papers selected for presentation by the scientific review committee of the 16th European Photovoltaic Solar Energy Conference. The comprehensive range of topics covered comprise: * Fundamentals, Novel Devices and New Materials * Thin Film Cells and Technologies * Space Cells and Systems * Crystalline Silicon Solar Cells and Technologies * PV Integration in Buildings * PV Modules and Components of PV Systems * Implementation, Strategies, National Programs and Financing Schemes * Market Deployment in Developing Countries These proceedings are an essential reference for all involved in the global PV industry- scientists, researchers, technologists and those with an interest in global market trends. The conference was organised by WIP-Renewable Energies, Munich, Germany.

Download or read book Advanced Polymeric Systems written by Didier Rouxel and published by CRC Press. This book was released on 2022-09-01 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over recent years a considerable amount of effort has been devoted, both in industry and academia, towards the incorporation of various macro, micro and nano sized fillers into polymers. There is also much interest in the evaluation of various polymer properties with respect to a wide set of applications. The advances in nanotechnology together with the development in material sciences has improved the shortcomings of these materials over the decade. This book covers the latest advances in the field of polymer nanocomposites and polymer composites for varied applications. The major topics discussed in the book include: • Nanostructured materials for energy applications • Nanostructured polymercomposites • Bio-polymers • Nanostructured polymers for biomedical applicationsThe book contains extended and updated research papers that were initially selected for the ICAMP-2017 conference which focused on advances in polymer materials.The book is ideal for researchers and practitioners in polymer science and materials science as well as for graduate students in polymer chemistry, materials science, nanotechnology and biomedical engineering.

Download or read book Photoelectrochemical Materials and Energy Conversion Processes written by Richard C. Alkire and published by John Wiley & Sons. This book was released on 2010-12-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international group of leading scientists from the field has contributed to the 12th volume in this series, covering a range of different types of solar cells and including a critical comparison of the different techniques available for manufacturing the semiconductors needed. The result is an expert insight the central questions surrounding photovoltaic materials and systems, reflecting the latest developments in this hot and timely green topic.

Download or read book Optical Thin Films and Structures written by Tsvetanka Babeva and published by MDPI. This book was released on 2021-06-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the design, application and characterization of thin films and structures, with special emphasis on optical applications. It comprises ten papers—five featured and five regular—authored by scientists all over the world. Diverse materials are studied and their possible applications are demonstrated and discussed—transparent conductive coatings and structures from ZnO doped with Al and Ga and Ti-doped SnO2, polymers and nanosized zeolite thin films for optical sensing, TiO2 with linear and nonlinear optical properties, organic diamagnetic materials, broadband optical coatings, CrWN glass molding coatings, and silicon on insulator waveguides.

Download or read book N4 Macrocyclic Metal Complexes written by J.H. Zagal and published by Springer Science & Business Media. This book was released on 2006-07-19 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to significant developments in sensor science and technology, this book offers insight into the various extended applications and developments of N4 macrocycle complexes in biomimetic electrocatalysis. Covers chemical properties of electrocatalysts, use of specific species, and analytical applications.

Download or read book ZnO Nanostructures written by Yue Zhang (Materials scientist) and published by Royal Society of Chemistry. This book was released on 2017-06-26 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wide band semiconductors with rich morphologies and interesting electric, optical, mechanical and piezoelectric properties, ZnO nanostructures have great potential in applications, such as strain sensors, UV detectors, blue LED, nano generators, and biosensors. ZnO Nanostructures: Fabrication and Applications covers the controllable synthesis and property optimization of ZnO nanostructures through to the preparation and performance of nanodevices for various applications. The book also includes recent progress in property modulation of ZnO nanomaterials and new types of devices as well as the latest research on self-powered devices and performance modulation of ZnO nanodevices by multi-field coupled effects. Authored by a leading researcher working within the field, this volume is applicable for those working in nanostructure fabrication and device application in industry and academia and is appropriate from advanced undergraduate level upwards.

Download or read book Physics of Semiconductor Devices written by V. K. Jain and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this workshop is to spread the vast amount of information available on semiconductor physics to every possible field throughout the scientific community. As a result, the latest findings, research and discoveries can be quickly disseminated. This workshop provides all participating research groups with an excellent platform for interaction and collaboration with other members of their respective scientific community. This workshop’s technical sessions include various current and significant topics for applications and scientific developments, including • Optoelectronics • VLSI & ULSI Technology • Photovoltaics • MEMS & Sensors • Device Modeling and Simulation • High Frequency/ Power Devices • Nanotechnology and Emerging Areas • Organic Electronics • Displays and Lighting Many eminent scientists from various national and international organizations are actively participating with their latest research works and also equally supporting this mega event by joining the various organizing committees.

Download or read book Optical Inspection of Microsystems written by Wolfgang Osten and published by CRC Press. This book was released on 2018-10-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Where conventional testing and inspection techniques fail at the micro-scale, optical techniques provide a fast, robust, and relatively inexpensive alternative for investigating the properties and quality of microsystems. Speed, reliability, and cost are critical factors in the continued scale-up of microsystems technology across many industries, and optical techniques are in a unique position to satisfy modern commercial and industrial demands. Optical Inspection of Microsystems is the first comprehensive, up-to-date survey of the most important and widely used full-field optical metrology and inspection technologies. Under the guidance of accomplished researcher Wolfgang Osten, expert contributors from industrial and academic institutions around the world share their expertise and experience with techniques such as image correlation, light scattering, scanning probe microscopy, confocal microscopy, fringe projection, grid and moiré techniques, interference microscopy, laser Doppler vibrometry, holography, speckle metrology, and spectroscopy. They also examine modern approaches to data acquisition and processing. The book emphasizes the evaluation of various properties to increase reliability and promote a consistent approach to optical testing. Numerous practical examples and illustrations reinforce the concepts. Supplying advanced tools for microsystem manufacturing and characterization, Optical Inspection of Microsystems enables you to reach toward a higher level of quality and reliability in modern micro-scale applications.

Download or read book Optical Inspection of Microsystems Second Edition written by Wolfgang Osten and published by CRC Press. This book was released on 2019-06-21 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Where conventional testing and inspection techniques fail at the microscale, optical techniques provide a fast, robust, noninvasive, and relatively inexpensive alternative for investigating the properties and quality of microsystems. Speed, reliability, and cost are critical factors in the continued scale-up of microsystems technology across many industries, and optical techniques are in a unique position to satisfy modern commercial and industrial demands. Optical Inspection of Microsystems, Second Edition, extends and updates the first comprehensive survey of the most important optical measurement techniques to be successfully used for the inspection of microsystems. Under the guidance of accomplished researcher Wolfgang Osten, expert contributors from industrial and academic institutions around the world share their expertise and experience with techniques such as image processing, image correlation, light scattering, scanning probe microscopy, confocal microscopy, fringe projection, grid and moire techniques, interference microscopy, laser-Doppler vibrometry, digital holography, speckle metrology, spectroscopy, and sensor fusion technologies. They also examine modern approaches to data acquisition and processing, such as the determination of surface features and the estimation of uncertainty of measurement results. The book emphasizes the evaluation of various system properties and considers encapsulated components to increase quality and reliability. Numerous practical examples and illustrations of optical testing reinforce the concepts. Supplying effective tools for increased quality and reliability, this book Provides a comprehensive, up-to-date overview of optical techniques for the measurement and inspection of microsystems Discusses image correlation, displacement and strain measurement, electro-optic holography, and speckle metrology techniques Offers numerous practical examples and illustrations Includes calibration of optical measurement systems for the inspection of MEMS Presents the characterization of dynamics of MEMS

Download or read book Optical Engineering Science written by Stephen Rolt and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for engineers and students that covers a wide range of optical design and optical metrology topics Optical Engineering Science offers a comprehensive and authoritative review of the science of optical engineering. The book bridges the gap between the basic theoretical principles of classical optics and the practical application of optics in the commercial world. Written by a noted expert in the field, the book examines a range of practical topics that are related to optical design, optical metrology and manufacturing. The book fills a void in the literature by coving all three topics in a single volume. Optical engineering science is at the foundation of the design of commercial optical systems, such as mobile phone cameras and digital cameras as well as highly sophisticated instruments for commercial and research applications. It spans the design, manufacture and testing of space or aerospace instrumentation to the optical sensor technology for environmental monitoring. Optics engineering science has a wide variety of applications, both commercial and research. This important book: Offers a comprehensive review of the topic of optical engineering Covers topics such as optical fibers, waveguides, aspheric surfaces, Zernike polynomials, polarisation, birefringence and more Targets engineering professionals and students Filled with illustrative examples and mathematical equations Written for professional practitioners, optical engineers, optical designers, optical systems engineers and students, Optical Engineering Science offers an authoritative guide that covers the broad range of optical design and optical metrology topics and their applications.

Download or read book Advanced Materials in Engineering Applications written by NVR Naidu and published by CRC Press. This book was released on 2024-11-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The formability features of sheets made of the alloy Al 8011 are examined experimentally and the results are compared with the numerical ones in this research. Through an axisymmetric finite element simulation of the Erichsen cupping test, formability characteristics were evaluated. The Erichsen cupping test was used to exam□ine the effects of several factors, including friction at the punch-sheet contact and sheet thickness. The nonlinear finite element method is used to calculate the dome height, stress, and strain values for the aluminum sheet, and the results are then compared to the numerical ones. The findings demonstrated that the Al 8011 alloy’s form□ability greatly rises with increasing sheet thickness. The formability is significantly impacted by the lubricant. The application of the finite element technique to forecast the formability of Al 8011 alloy.