Download or read book Optimal Control from Theory to Computer Programs written by Viorel Arnăutu and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the mathematical theory and the know-how to make computer programs for the numerical approximation of Optimal Control of PDE's. The computer programs are presented in a straightforward generic language. As a consequence they are well structured, clearly explained and can be translated easily into any high level programming language. Applications and corresponding numerical tests are also given and discussed. To our knowledge, this is the first book to put together mathematics and computer programs for Optimal Control in order to bridge the gap between mathematical abstract algorithms and concrete numerical ones. The text is addressed to students and graduates in Mathematics, Mechanics, Applied Mathematics, Numerical Software, Information Technology and Engineering. It can also be used for Master and Ph.D. programs.
Download or read book Theory of Optimal Control and Mathematical Programming written by Michael D. Canon and published by New York ; Toronto : McGraw-Hill Book Company. This book was released on 1970 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book has three basic aims: to present a unified theory of optimization, to introduce nonlinear programming algorithms to the control engineer, and to introduce the nonlinear programming expert to optimal control. This volume can be used either as a graduate text or as a reference text." --Preface.
Download or read book Optimal Control Theory written by Donald E. Kirk and published by Courier Corporation. This book was released on 2012-04-26 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Upper-level undergraduate text introduces aspects of optimal control theory: dynamic programming, Pontryagin's minimum principle, and numerical techniques for trajectory optimization. Numerous figures, tables. Solution guide available upon request. 1970 edition.
Download or read book Optimal Control and Estimation written by Robert F. Stengel and published by Courier Corporation. This book was released on 2012-10-16 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graduate-level text provides introduction to optimal control theory for stochastic systems, emphasizing application of basic concepts to real problems. "Invaluable as a reference for those already familiar with the subject." — Automatica.
Download or read book Optimal Control written by William W. Hager and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: February 27 - March 1, 1997, the conference Optimal Control: The ory, Algorithms, and Applications took place at the University of Florida, hosted by the Center for Applied Optimization. The conference brought together researchers from universities, industry, and government laborato ries in the United States, Germany, Italy, France, Canada, and Sweden. There were forty-five invited talks, including seven talks by students. The conference was sponsored by the National Science Foundation and endorsed by the SIAM Activity Group on Control and Systems Theory, the Mathe matical Programming Society, the International Federation for Information Processing (IFIP), and the International Association for Mathematics and Computers in Simulation (IMACS). Since its inception in the 1940s and 1950s, Optimal Control has been closely connected to industrial applications, starting with aerospace. The program for the Gainesville conference, which reflected the rich cross-disci plinary flavor of the field, included aerospace applications as well as both novel and emerging applications to superconductors, diffractive optics, non linear optics, structural analysis, bioreactors, corrosion detection, acoustic flow, process design in chemical engineering, hydroelectric power plants, sterilization of canned foods, robotics, and thermoelastic plates and shells. The three days of the conference were organized around the three confer ence themes, theory, algorithms, and applications. This book is a collection of the papers presented at the Gainesville conference. We would like to take this opportunity to thank the sponsors and participants of the conference, the authors, the referees, and the publisher for making this volume possible.
Download or read book Optimal Control Systems written by D. Subbaram Naidu and published by CRC Press. This book was released on 2018-10-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of optimal control systems has grown and flourished since the 1960's. Many texts, written on varying levels of sophistication, have been published on the subject. Yet even those purportedly designed for beginners in the field are often riddled with complex theorems, and many treatments fail to include topics that are essential to a thorough grounding in the various aspects of and approaches to optimal control. Optimal Control Systems provides a comprehensive but accessible treatment of the subject with just the right degree of mathematical rigor to be complete but practical. It provides a solid bridge between "traditional" optimization using the calculus of variations and what is called "modern" optimal control. It also treats both continuous-time and discrete-time optimal control systems, giving students a firm grasp on both methods. Among this book's most outstanding features is a summary table that accompanies each topic or problem and includes a statement of the problem with a step-by-step solution. Students will also gain valuable experience in using industry-standard MATLAB and SIMULINK software, including the Control System and Symbolic Math Toolboxes. Diverse applications across fields from power engineering to medicine make a foundation in optimal control systems an essential part of an engineer's background. This clear, streamlined presentation is ideal for a graduate level course on control systems and as a quick reference for working engineers.
Download or read book Practical Methods for Optimal Control and Estimation Using Nonlinear Programming written by John T. Betts and published by SIAM. This book was released on 2010-01-01 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: A focused presentation of how sparse optimization methods can be used to solve optimal control and estimation problems.
Download or read book Optimal Control written by Leslie M. Hocking and published by Oxford University Press. This book was released on 1991 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems that evolve with time occur frequently in nature and modelling the behavior of such systems provides an important application of mathematics. These systems can be completely deterministic, but it may be possible too to control their behavior by intervention through "controls". The theory of optimal control is concerned with determining such controls which, at minimum cost, either direct the system along a given trajectory or enable it to reach a given point in its state space. This textbook is a straightforward introduction to the theory of optimal control with an emphasis on presenting many different applications. Professor Hocking has taken pains to ensure that the theory is developed to display the main themes of the arguments but without using sophisticated mathematical tools. Problems in this setting can arise across a wide range of subjects and there are illustrative examples of systems from fields as diverse as dynamics, economics, population control, and medicine. Throughout there are many worked examples, and numerous exercises (with solutions) are provided.
Download or read book Reinforcement Learning and Optimal Control written by Dimitri Bertsekas and published by Athena Scientific. This book was released on 2019-07-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers large and challenging multistage decision problems, which can be solved in principle by dynamic programming (DP), but their exact solution is computationally intractable. We discuss solution methods that rely on approximations to produce suboptimal policies with adequate performance. These methods are collectively known by several essentially equivalent names: reinforcement learning, approximate dynamic programming, neuro-dynamic programming. They have been at the forefront of research for the last 25 years, and they underlie, among others, the recent impressive successes of self-learning in the context of games such as chess and Go. Our subject has benefited greatly from the interplay of ideas from optimal control and from artificial intelligence, as it relates to reinforcement learning and simulation-based neural network methods. One of the aims of the book is to explore the common boundary between these two fields and to form a bridge that is accessible by workers with background in either field. Another aim is to organize coherently the broad mosaic of methods that have proved successful in practice while having a solid theoretical and/or logical foundation. This may help researchers and practitioners to find their way through the maze of competing ideas that constitute the current state of the art. This book relates to several of our other books: Neuro-Dynamic Programming (Athena Scientific, 1996), Dynamic Programming and Optimal Control (4th edition, Athena Scientific, 2017), Abstract Dynamic Programming (2nd edition, Athena Scientific, 2018), and Nonlinear Programming (Athena Scientific, 2016). However, the mathematical style of this book is somewhat different. While we provide a rigorous, albeit short, mathematical account of the theory of finite and infinite horizon dynamic programming, and some fundamental approximation methods, we rely more on intuitive explanations and less on proof-based insights. Moreover, our mathematical requirements are quite modest: calculus, a minimal use of matrix-vector algebra, and elementary probability (mathematically complicated arguments involving laws of large numbers and stochastic convergence are bypassed in favor of intuitive explanations). The book illustrates the methodology with many examples and illustrations, and uses a gradual expository approach, which proceeds along four directions: (a) From exact DP to approximate DP: We first discuss exact DP algorithms, explain why they may be difficult to implement, and then use them as the basis for approximations. (b) From finite horizon to infinite horizon problems: We first discuss finite horizon exact and approximate DP methodologies, which are intuitive and mathematically simple, and then progress to infinite horizon problems. (c) From deterministic to stochastic models: We often discuss separately deterministic and stochastic problems, since deterministic problems are simpler and offer special advantages for some of our methods. (d) From model-based to model-free implementations: We first discuss model-based implementations, and then we identify schemes that can be appropriately modified to work with a simulator. The book is related and supplemented by the companion research monograph Rollout, Policy Iteration, and Distributed Reinforcement Learning (Athena Scientific, 2020), which focuses more closely on several topics related to rollout, approximate policy iteration, multiagent problems, discrete and Bayesian optimization, and distributed computation, which are either discussed in less detail or not covered at all in the present book. The author's website contains class notes, and a series of videolectures and slides from a 2021 course at ASU, which address a selection of topics from both books.
Download or read book Applications of Optimal Control Theory to Computer Controller Design written by William S. Widnall and published by MIT Press (MA). This book was released on 1968 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Control Computer Programs written by and published by . This book was released on 1992 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Control Computer Programs written by National Aeronaut Administration (Nasa) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-10 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The solution of the optimal control problem, even with low order dynamical systems, can usually strain the analytical ability of most engineers. The understanding of this subject matter, therefore, would be greatly enhanced if a software package existed that could simulate simple generic problems. Surprisingly, despite a great abundance of commercially available control software, few, if any, address the part of optimal control in its most generic form. The purpose of this paper is, therefore, to present a simple computer program that will perform simulations of optimal control problems that arise from the first necessary condition and the Pontryagin's maximum principle. Kuo, F. Marshall Space Flight Center...
Download or read book Computational Optimal Control written by Dr Subchan Subchan and published by John Wiley & Sons. This book was released on 2009-08-19 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Optimal Control: Tools and Practice provides a detailed guide to informed use of computational optimal control in advanced engineering practice, addressing the need for a better understanding of the practical application of optimal control using computational techniques. Throughout the text the authors employ an advanced aeronautical case study to provide a practical, real-life setting for optimal control theory. This case study focuses on an advanced, real-world problem known as the “terminal bunt manoeuvre” or special trajectory shaping of a cruise missile. Representing the many problems involved in flight dynamics, practical control and flight path constraints, this case study offers an excellent illustration of advanced engineering practice using optimal solutions. The book describes in practical detail the real and tested optimal control software, examining the advantages and limitations of the technology. Featuring tutorial insights into computational optimal formulations and an advanced case-study approach to the topic, Computational Optimal Control: Tools and Practice provides an essential handbook for practising engineers and academics interested in practical optimal solutions in engineering. Focuses on an advanced, real-world aeronautical case study examining optimisation of the bunt manoeuvre Covers DIRCOL, NUDOCCCS, PROMIS and SOCS (under the GESOP environment), and BNDSCO Explains how to configure and optimize software to solve complex real-world computational optimal control problems Presents a tutorial three-stage hybrid approach to solving optimal control problem formulations
Download or read book Optimal Control written by Peter Whittle and published by Wiley. This book was released on 1996-08-01 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of a system as an entity in its own right has emerged with increasing force in the past few decades in, for example, the areas of electrical and control engineering, economics, ecology, urban structures, automaton theory, operational research and industry. The more definite concept of a large-scale system is implicit in these applications, but is particularly evident in fields such as the study of communication networks, computer networks and neural networks. The Wiley-Interscience Series in Systems and Optimization has been established to serve the needs of researchers in these rapidly developing fields. It is intended for works concerned with developments in quantitative systems theory, applications of such theory in areas of interest, or associated methodology. This is the first book-length treatment of risk-sensitive control, with many new results. The quadratic cost function of the standard LQG (linear/quadratic/Gaussian) treatment is replaced by the exponential of a quadratic, giving the so-called LEQG formulation allowing for a degree of optimism or pessimism on the part of the optimiser. The author is the first to achieve formulation and proof of risk-sensitive versions of the certainty-equivalence and separation principles. Further analysis allows one to formulate the optimization as the extremization of a path integral and to characterize the solution in terms of canonical factorization. It is thus possible to achieve the long-sought goal of an operational stochastic maximum principle, valid for a higher-order model, and in fact only evident when the models are extended to the risk-sensitive class. Additional results include deduction of compact relations between value functions and canonical factors, the exploitation of the equivalence between policy improvement and Newton Raphson methods and the direct relation of LEQG methods to the H??? and minimum-entropy methods. This book will prove essential reading for all graduate students, researchers and practitioners who have an interest in control theory including mathematicians, engineers, economists, physicists and psychologists. 1990 Stochastic Programming Peter Kall, University of Zurich, Switzerland and Stein W. Wallace, University of Trondheim, Norway Stochastic Programming is the first textbook to provide a thorough and self-contained introduction to the subject. Carefully written to cover all necessary background material from both linear and non-linear programming, as well as probability theory, the book draws together the methods and techniques previously described in disparate sources. After introducing the terms and modelling issues when randomness is introduced in a deterministic mathematical programming model, the authors cover decision trees and dynamic programming, recourse problems, probabilistic constraints, preprocessing and network problems. Exercises are provided at the end of each chapter. Throughout, the emphasis is on the appropriate use of the techniques, rather than on the underlying mathematical proofs and theories, making the book ideal for researchers and students in mathematical programming and operations research who wish to develop their skills in stochastic programming. 1994
Download or read book Calculus of Variations and Optimal Control Theory written by Daniel Liberzon and published by Princeton University Press. This book was released on 2012 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a concise yet rigorous introduction to calculus of variations and optimal control theory, and is a self-contained resource for graduate students in engineering, applied mathematics, and related subjects. Designed specifically for a one-semester course, the book begins with calculus of variations, preparing the ground for optimal control. It then gives a complete proof of the maximum principle and covers key topics such as the Hamilton-Jacobi-Bellman theory of dynamic programming and linear-quadratic optimal control. Calculus of Variations and Optimal Control Theory also traces the historical development of the subject and features numerous exercises, notes and references at the end of each chapter, and suggestions for further study. Offers a concise yet rigorous introduction Requires limited background in control theory or advanced mathematics Provides a complete proof of the maximum principle Uses consistent notation in the exposition of classical and modern topics Traces the historical development of the subject Solutions manual (available only to teachers) Leading universities that have adopted this book include: University of Illinois at Urbana-Champaign ECE 553: Optimum Control Systems Georgia Institute of Technology ECE 6553: Optimal Control and Optimization University of Pennsylvania ESE 680: Optimal Control Theory University of Notre Dame EE 60565: Optimal Control
Download or read book Feedback Control for Computer Systems written by Philipp K. Janert and published by "O'Reilly Media, Inc.". This book was released on 2013-09-19 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can you take advantage of feedback control for enterprise programming? With this book, author Philipp K. Janert demonstrates how the same principles that govern cruise control in your car also apply to data center management and other enterprise systems. Through case studies and hands-on simulations, you’ll learn methods to solve several control issues, including mechanisms to spin up more servers automatically when web traffic spikes. Feedback is ideal for controlling large, complex systems, but its use in software engineering raises unique issues. This book provides basic theory and lots of practical advice for programmers with no previous background in feedback control. Learn feedback concepts and controller design Get practical techniques for implementing and tuning controllers Use feedback “design patterns” for common control scenarios Maintain a cache’s “hit rate” by automatically adjusting its size Respond to web traffic by scaling server instances automatically Explore ways to use feedback principles with queueing systems Learn how to control memory consumption in a game engine Take a deep dive into feedback control theory
Download or read book Practical Methods for Optimal Control Using Nonlinear Programming Third Edition written by John T. Betts and published by SIAM. This book was released on 2020-07-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: How do you fly an airplane from one point to another as fast as possible? What is the best way to administer a vaccine to fight the harmful effects of disease? What is the most efficient way to produce a chemical substance? This book presents practical methods for solving real optimal control problems such as these. Practical Methods for Optimal Control Using Nonlinear Programming, Third Edition focuses on the direct transcription method for optimal control. It features a summary of relevant material in constrained optimization, including nonlinear programming; discretization techniques appropriate for ordinary differential equations and differential-algebraic equations; and several examples and descriptions of computational algorithm formulations that implement this discretize-then-optimize strategy. The third edition has been thoroughly updated and includes new material on implicit Runge–Kutta discretization techniques, new chapters on partial differential equations and delay equations, and more than 70 test problems and open source FORTRAN code for all of the problems. This book will be valuable for academic and industrial research and development in optimal control theory and applications. It is appropriate as a primary or supplementary text for advanced undergraduate and graduate students.
