Download or read book Optical Inspection of Microsystems written by Wolfgang Osten and published by CRC Press. This book was released on 2018-10-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Where conventional testing and inspection techniques fail at the micro-scale, optical techniques provide a fast, robust, and relatively inexpensive alternative for investigating the properties and quality of microsystems. Speed, reliability, and cost are critical factors in the continued scale-up of microsystems technology across many industries, and optical techniques are in a unique position to satisfy modern commercial and industrial demands. Optical Inspection of Microsystems is the first comprehensive, up-to-date survey of the most important and widely used full-field optical metrology and inspection technologies. Under the guidance of accomplished researcher Wolfgang Osten, expert contributors from industrial and academic institutions around the world share their expertise and experience with techniques such as image correlation, light scattering, scanning probe microscopy, confocal microscopy, fringe projection, grid and moiré techniques, interference microscopy, laser Doppler vibrometry, holography, speckle metrology, and spectroscopy. They also examine modern approaches to data acquisition and processing. The book emphasizes the evaluation of various properties to increase reliability and promote a consistent approach to optical testing. Numerous practical examples and illustrations reinforce the concepts. Supplying advanced tools for microsystem manufacturing and characterization, Optical Inspection of Microsystems enables you to reach toward a higher level of quality and reliability in modern micro-scale applications.
Download or read book Optical Techniques for Industrial Inspection written by Paolo G. Cielo and published by . This book was released on 1988 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an extensive review of the optical- and laser-based techniques that are available for quality control and process monitoring in the industrial production environment. The physical principles of each technique are explained in simple terms, and their applicability to specific industrial needs is discussed on the basis of wide hands-on experience. A large number of practical applications to in-process industrial sensing and metrology are described, and more than onethousand references are included. Topics include on-line surface inspection, 3-D imaging, nondestructive testing, fiber-optic sensors, robot guidance, as well as spectroscopic and light-scattering process analyzers. Key Features * Describes a large number of practical applications to in-process industrial sensing and metrology * Includes more than one thousand references * Covers on-line surface inspection, 3-D imaging, nondestructive testing, fiber-optic sensors, robot guidance, and more
Download or read book Selected Papers on Optical Techniques for Industrial Inspection written by Paolo G. Cielo and published by SPIE-International Society for Optical Engineering. This book was released on 1997 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents of this volume include: on-line glossmeter for stainless steel sheets; in process optical measurement of micro profile on cold rolled steel plates; optical profile transducer; and optical profilers for surface roughness.
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Optical Measurement Techniques written by Kai-Erik Peiponen and published by Springer Science & Business Media. This book was released on 2009-02-12 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devoted to new optical measurement techniques in industry as well as the life sciences, this book has a fresh perspective on the development of modern optical sensors, which are essential for the control of parameters in industrial and biomedical applications.
Download or read book Machine Vision written by Jürgen Beyerer and published by Springer. This book was released on 2015-10-01 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a thorough introduction to machine vision. It is organized in two parts. The first part covers the image acquisition, which is the crucial component of most automated visual inspection systems. All important methods are described in great detail and are presented with a reasoned structure. The second part deals with the modeling and processing of image signals and pays particular regard to methods, which are relevant for automated visual inspection.
Download or read book Optics Inspections and Tests written by Michael Hausner and published by SPIE-International Society for Optical Engineering. This book was released on 2016-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book instructs inspectors and designers of optical elements and assemblies with the primary means of inspection and testing, as well as the relevant tools and instruments"--
Download or read book Integrated Imaging and Vision Techniques for Industrial Inspection written by Zheng Liu and published by Springer. This book was released on 2015-09-24 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pioneering text/reference presents a detailed focus on the use of machine vision techniques in industrial inspection applications. An internationally renowned selection of experts provide insights on a range of inspection tasks, drawn from their cutting-edge work in academia and industry, covering practical issues of vision system integration for real-world applications. Topics and features: presents a comprehensive review of state-of-the-art hardware and software tools for machine vision, and the evolution of algorithms for industrial inspection; includes in-depth descriptions of advanced inspection methodologies and machine vision technologies for specific needs; discusses the latest developments and future trends in imaging and vision techniques for industrial inspection tasks; provides a focus on imaging and vision system integration, implementation, and optimization; describes the pitfalls and barriers to developing successful inspection systems for smooth and efficient manufacturing process.
Download or read book Digital Optical Measurement Techniques and Applications written by Pramod Rastogi and published by Artech House. This book was released on 2015-05-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource explains the principles and applications of today’s digital optical measurement techniques. From start to finish, each chapter provides a concise introduction to the concepts and principles of digital optical metrology, followed by a detailed presentation of their applications. The development of all these topics, including their numerous methods, principles, and applications, has been illustrated using a large number of easy-to-understand figures. This book aims to not only help the reader identify the appropriate techniques in function of the measurement requirements, but also assess modern digital measurement systems.
Download or read book Optical Measurement Techniques written by Kai-Erik Peiponen and published by Springer. This book was released on 2009-03-15 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devoted to novel optical measurement techniques that are applied both in industry and life sciences, this book contributes a fresh perspective on the development of modern optical sensors. These sensors are often essential in detecting and controlling parameters that are important for both industrial and biomedical applications. The book provides easy access for beginners wishing to gain familiarity with the innovations of modern optics.
Download or read book Sensors for Industrial Inspection written by C. Loughlin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous areas of expertise are often required for the inspection of an individual product, with many different sensors being used within a single inspection machine. For this reason it is necessary for the production engineer to have at least a working knowledge of all the different technologies that may be employed. This book covers the majority of sensors that can be applied on the shop floor and has been designed to assist engineers with little or no previous experience in the various fields. The information that the book contains is of a highly practical nature and is based on the author's considerable first-hand experience of varied industrial applications.
Download or read book Machine Vision Inspection Systems Machine Learning Based Approaches written by Muthukumaran Malarvel and published by John Wiley & Sons. This book was released on 2021-01-15 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Vision Inspection Systems (MVIS) is a multidisciplinary research field that emphasizes image processing, machine vision and, pattern recognition for industrial applications. Inspection techniques are generally used in destructive and non-destructive evaluation industry. Now a day's the current research on machine inspection gained more popularity among various researchers, because the manual assessment of the inspection may fail and turn into false assessment due to a large number of examining while inspection process. This volume 2 covers machine learning-based approaches in MVIS applications and it can be employed to a wide diversity of problems particularly in Non-Destructive testing (NDT), presence/absence detection, defect/fault detection (weld, textile, tiles, wood, etc.), automated vision test & measurement, pattern matching, optical character recognition & verification (OCR/OCV), natural language processing, medical diagnosis, etc. This edited book is designed to address various aspects of recent methodologies, concepts, and research plan out to the readers for giving more depth insights for perusing research on machine vision using machine learning-based approaches.
Download or read book Industrial Applications of Optical Inspection Metrology and Sensing written by Kevin G. Harding and published by . This book was released on 1993 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Optical Dimensional Metrology written by Kevin Harding and published by Taylor & Francis. This book was released on 2016-04-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their speed, data density, and versatility, optical metrology tools play important roles in today's high-speed industrial manufacturing applications. Handbook of Optical Dimensional Metrology provides useful background information and practical examples to help readers understand and effectively use state-of-the-art optical metrology methods
Download or read book In process Optical Measurements and Industrial Methods written by Hugh Angus Macleod and published by SPIE-International Society for Optical Engineering. This book was released on 1990 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Signal Processing and Pattern Recognition in Nondestructive Evaluation of Materials written by C.H. Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Research Workshop on Signal Processing and Pattern Recognition in Nondestructive Evaluation (NOE) of Materials was held August 19-22, 1987 at the Manoir St-Castin, Lac Beauport, Quebec, Canada. Modern signal processing, pattern recognition and artificial intelligence have been playing an increasingly important role in improving nondestructive evaluation and testing techniques. The cross fertilization of the two major areas can lead to major advances in NOE as well as presenting a new research area in signal processing. With this in mind, the Workshop provided a good review of progress and comparison of potential techniques, as well as constructive discussions and suggestions for effective use of modern signal processing to improve flaw detection, classification and prediction, as well as material characterization. This Proceedings volume includes most presentations given at the Workshop. This publication, like the meeting itself, is unique in the sense that it provides extensive interactions among the interrelated areas of NOE. The book starts with research advances on inverse problems and then covers different aspects of digital waveform processing in NOE and eddy current signal analysis. These are followed by four papers of pattern recognition and AI in NOE, and five papers of image processing and reconstruction in NOE. The last two papers deal with parameter estimation problems. Though the list of papers is not extensive, as the field of NOE signal processing is very new, the book has an excellent collection of both tutorial and research papers in this exciting new field.
Download or read book Optical Methods of Engineering Analysis written by Gary L. Cloud and published by Cambridge University Press. This book was released on 1998-05-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental measurement problems in engineering, mechanics, manufacturing, and physics are now being solved by powerful optical methods. This book presents a lucid, up-to-date discussion of these optical methods. Beginning from a firm base in modern optics, the book proceeds through relevant theory of interference and diffraction and integrates this theory with descriptions of laboratory techniques and apparatus. Among the techniques discussed are classical interferometry, photoelasticity, geometric moire, spatial filtering, moire interferometry, holography, holographic interferometry, laser speckle interferometry, and video-based speckle methods. By providing a firm base in the physical principles and at the same time allowing the reader to perform meaningful experiments related to the topic being studied, the book offers a unique user-oriented approach that will appeal to students, researchers and practising engineers.
