Download or read book Optical Properties of Tin IV Oxide SnO2 Thin Film Deposited by RF Magnetron Sputtering written by Najihah Hannani Arshad and published by . This book was released on 2007 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Surface of Morphology of Tin IV Oxide SnO2 Thin Film Deposited by RF Sputtering written by Guan Ni Yeo (lc) and published by . This book was released on 2010 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Optical and Structural Properties of Indium Tin Oxide Thin Films Deposited on Glass Pet and Polycarbonate Substrates by Rf Sputtering written by Teck-Shiun Lim and published by . This book was released on 199? with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth and Characterization of Ito Thin Film by Magnetron Sputtering written by Öcal Tuna and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study Indium Tin Oxide (ITO) thin films were grown by both DC and RF magnetron sputtering techniques. To know deposition rate of ITO, system was calibrated for both DCMS and RFMS and then ITO were grown on glass substrate with the thickness of 70 nm and 40 nm by changing substrate temperature. The effect of substrate temperature, film thickness and sputtering method on structural, electrical and optical properties were investigated. The results show that substrate temperature and film thickness substantially affects the film properties, especially crystallization and resistivity. The thin films grown at the lower than 150 oC showed amorphous structure. However, crystallization was detected with the furtherincrease of substrate temperature. Band gap of ITO was calculated to be about 3.64eV at the substrate temperature of 150 oC, and itwidened with substrate temperature increment. From electrical measurements the resistivity at room temperature was obtained 1.28x10-4 and 1.29x10-4 D-cm, for DC and RF sputtered films, respectively. We also measured temperature dependence resistivity and the Hall coefficient of the films, and we calculated carrier concentration and Hall mobility."
Download or read book The Effect of Film Thickness on Optical Properties of Tin IV Oxide Thin Films Using DC Sputtering Method written by Noor Atiqah Jailani and published by . This book was released on 2011 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Thin Films and Structures written by Tsvetanka Babeva and published by MDPI. This book was released on 2021-06-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the design, application and characterization of thin films and structures, with special emphasis on optical applications. It comprises ten papers—five featured and five regular—authored by scientists all over the world. Diverse materials are studied and their possible applications are demonstrated and discussed—transparent conductive coatings and structures from ZnO doped with Al and Ga and Ti-doped SnO2, polymers and nanosized zeolite thin films for optical sensing, TiO2 with linear and nonlinear optical properties, organic diamagnetic materials, broadband optical coatings, CrWN glass molding coatings, and silicon on insulator waveguides.
Download or read book Transparent Conducting Pure and Tin Doped Indium Oxide Films Preparation and Characterization written by Dr. B. Radhakrishna and published by Lulu.com. This book was released on 2019-03-26 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Badeker in 1907 observed that some materials are optically transparent in the visible light and electrically conducting [1]. Because of the increasing interest in electrically and electronically active materials, the search for materials and the techniques for producing semi-transparent electrically conducting films have gained much importance. In an intrinsic stoichiometric material, it is not possible to have simultaneously high transparency (>80%%) in the visible region and high electrical conductivity (>103 Ω cm-1). A variety of metals in thin film form (
Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.
Download or read book TMS 2015 144th Annual Meeting and Exhibition written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2015-02-26 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2015 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2015 Annual Meeting & Exhibition, held March 15-19 in Orlando, Florida, USA. The papers in this volume represent 33 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 73 symposia held at TMS2015. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented "as is." The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.
Download or read book Preparation and Post Annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films written by Rongxin Wang and published by Open Dissertation Press. This book was released on 2017-01-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Preparation and Post-annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films" by Rongxin, Wang, 王榮新, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled PREPARATION AND POST-ANNEALING EFFECTS ON THE OPTICAL PROPERTIES OF INDIUM TIN OXIDE THIN FILMS Submitted by WANG Rong Xin for the degree of Doctor of Philosophy at The University of Hong Kong in April 2005 Many opto-electronic devices, such as III-V compound devices, liquid crystal displays, solar cells, organic and inorganic light emitting devices, and ultraviolet photodetectors, demand transparent electrode materials simultaneously having high electrical conductance. To meet the requirements for particular applications, a great deal of basic research and studies have been carried out on the electrical and optical properties of these materials. As a most promising candidate for such materials, indium tin oxide (ITO) has attracted interest in recent years. Furthermore, ITO has many unique properties such as excellent adhesion on the substrate, thermal stability and ease of patterning. The deposition of high-quality ITO thin films is a key step for successful application of ITO thin films as transparent electrode materials. To obtain optimal electrical and optical properties of ITO films, the growth parameters and conditions must be determined. Moreover, the optical and electrical properties of ITO contact layers, which can either be on the top side or the bottom side of a device, are influenced by various post-deposition treatments. For the present work, ITO thin films were deposited on glass and quartz substrates using e-beam evaporation with different deposition rates. The influence of substrate material, deposition rate, deposition gas environment and post-deposition annealing on the optical properties of the films was investigated in detail. Atomic force microscopy, X-ray diffraction and X-ray photoemission spectroscopy was employed to obtain information on the chemical state and crystallization of the films. Analysis of these data suggests that the substrate material, deposition rate, deposition gas environment and post-deposition annealing conditions strongly affect the chemical composition and the microstructure of the ITO films and these in turn influence the optical properties of the film. Oxygen incorporation transfers the In O phase to the In O phase and removes metallic In to form both indium oxide 2 3-x 2 3 phases. Both of these reactions are beneficial for the optical transmittance of ITO thin films. Moreover, it was found that the incorporation and decomposition reactions of oxygen can be controlled so as to change the optical properties of the ITO thin films reversibly. DOI: 10.5353/th_b3154617 Subjects: Thin films - Optical properties Indium compounds Annealing of metals
Download or read book Properties of R f Sputter Deposited Indium Tin Oxide Thin Films on Glass Substrates written by Nickolas R. Greenland and published by . This book was released on 2001 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defect Induced Magnetism in Oxide Semiconductors written by Parmod Kumar and published by Elsevier. This book was released on 2023-05-26 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect-Induced Magnetism in Oxide Semiconductors provides an overview of the latest advances in defect engineering to create new magnetic materials and enable new technological applications. First, the book introduces the mechanisms, behavior, and theory of magnetism in oxide semiconductors and reviews the methods of inducing magnetism in these materials. Then, strategies such as pulsed laser deposition and RF sputtering to grow oxide nanostructured materials with induced magnetism are discussed. This is followed by a review of the most relevant postdeposition methods to induce magnetism in oxide semiconductors including annealing, ion irradiation, and ion implantation. Examples of defect-induced magnetism in oxide semiconductors are provided along with selected applications. This book is a suitable reference for academic researchers and practitioners and for people engaged in research and development in the disciplines of materials science and engineering. - Reviews the magnetic, electrical, dielectric and optical properties of oxide semiconductors with defect-induced magnetism - Discusses growth and post-deposition strategies to grow oxide nanostructured materials such as oxide thin films with defect-induced magnetism - Provides examples of materials with defect-induced magnetism such as zinc oxide, cerium dioxide, hafnium dioxide, and more
Download or read book TMS 2015 144th Annual Meeting Exhibition Annual Meeting Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2016-12-20 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study of Optical Properties of Silicon Carbide Thin Film SiC Deposited by RF Magnetron Sputtering written by Kok Weng Lam (ld) and published by . This book was released on 2009 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tin Oxide Materials written by Marcelo Ornaghi Orlandi and published by Elsevier. This book was released on 2019-10-05 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tin Oxide Materials: Synthesis, Properties, and Applications discusses the latest in metal oxides, an emerging area in electronic materials. As more is learned about this important materials system, more functionalities and applications have been revealed. This key reference on the topic covers important material that is ideal for materials scientists, materials engineers and materials chemists who have been introduced to metal oxides as a general category of materials, but want to take the next step and learn more about a specific material. Provides a complete resource on tin oxide materials systems, including in-depth discussions of properties, their synthesis, modelling methods, and applications Presents information on the well-investigated SnO2, but also includes discussions on its emerging stoichiometries, such as SnO and Sn3O4 Includes the most relevant applications in varistors, sensing devices, fuel cells, transistors, biological studies, and much more
Download or read book Recent Advances in Thin Film Photovoltaics written by Udai P. Singh and published by Springer Nature. This book was released on 2022-09-02 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent development in thin-film solar cells (TFSC). TFSC have proven the promising approach for terrestrial and space photovoltaics. TFSC have the potential to change the device design and produce high efficiency devices on rigid/flexible substrates with significantly low manufacturing cost. TFSC have several advantages in manufacturing compared to traditional crystalline Si-solar cells like less requirement of materials, can be prepared with earth’s abundant materials, less processing steps, easy to dispose, etc. Several universities/research institutes/industry in India and abroad are involved in the research area of thin-film solar cells. The book helps the readers to find the details about different thin-film technologies and its advancement at one place. Each chapter covers properties of materials, its suitability for PV applications, simple manufacturing processes and recent and past literature survey. The issues related to the development of high efficiency TFSC devices over large area and its commercial and future prospects are discussed.
