Download or read book Optical Microscopy of Materials written by Raymond Haynes and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Sorby published his observations on the structures of steels in 1863, the optical microscope has become one of the most widely used and versatile instruments for examining the structures of engineering materials. Moreover, to examine the diverse range of materials encountered, it must be used in both the reflected-light and transmitted-light forms, and with polarized light. It is complementary to, but not superseded by, the wide range of electron-optical instruments that are now used. Despite its extensive use, it has been described as the most misused, abused, and misunderstood of scientific instruments, for it will produce an image of a sort no matter how badly it is used. To use it effectively, even in its simplest applications, a knowledge of the simple theory of the microscope is necessary, for the theory shows and explains how it should be used. Thus my aim has been to give a simple and, where possible, quantitative account of both the theory and the use of the microscope, including the various special techniques for which it can be used. But, no matter how effectively the microscope is used, if the specimen is inadequately prepared the results of examination will be of doubtful value.
Download or read book Optical Microscopy of Fiber Reinforced Composites written by Brian S. Hayes and published by ASM International. This book was released on 2010-01-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical microscopy is one of the most valuable--but under utilized--tools for analyzing fiber reinforced polymer matrix composites. This hands-on instructional book covers everything: sample preparation, microscopic techniques, and applications. The power of optical microscopy to study the microstructure of these heterogeneous, anisotropic materials is illustrated with over 180 full color images.
Download or read book Optical Microscopy of Materials written by Raymond Haynes and published by Springer. This book was released on 2013-05-28 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since Sorby published his observations on the structures of steels in 1863, the optical microscope has become one of the most widely used and versatile instruments for examining the structures of engineering materials. Moreover, to examine the diverse range of materials encountered, it must be used in both the reflected-light and transmitted-light forms, and with polarized light. It is complementary to, but not superseded by, the wide range of electron-optical instruments that are now used. Despite its extensive use, it has been described as the most misused, abused, and misunderstood of scientific instruments, for it will produce an image of a sort no matter how badly it is used. To use it effectively, even in its simplest applications, a knowledge of the simple theory of the microscope is necessary, for the theory shows and explains how it should be used. Thus my aim has been to give a simple and, where possible, quantitative account of both the theory and the use of the microscope, including the various special techniques for which it can be used. But, no matter how effectively the microscope is used, if the specimen is inadequately prepared the results of examination will be of doubtful value.
Download or read book Microscopy Techniques for Materials Science written by A Clarke and published by Elsevier. This book was released on 2002-10-29 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference work provides an overview of, and practical guide to, the various computer-aided microscopical techniques used in materials science today. After introducing the reader to the basic concepts of optics, the interactions between light and matter, and image processing, the book goes on to discuss in depth both 2D reflection microscopy and confocal laser scanning microscopy. The application of these techniques to the characterisation of materials is abundantly illustrated by hundreds of photographs and illustrations, and through specific case studies. There is also discussion of other modern optical imaging techniques and of non-optical ones such as x-ray micrography. This reference text is essential both for beginners looking for an introduction to the subject as well as advanced materials researchers in the fields where optical microscopy is used. - Major reference work on the application of microscopy techniques to materials science research - Includes over 420 photographs and illustrations - Provides detailed coverage of the major light microscopical techniques including optical reflection microscopy and confocal laser scanning microscopy as well as novel techniques such raman microscopy, tomography and microtomography
Download or read book A Practical Guide to Optical Microscopy written by John Girkin and published by CRC Press. This book was released on 2019-06-14 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Choice Recommended Title, March 2020 Optical microscopy is used in a vast range of applications ranging from materials engineering to in vivo observations and clinical diagnosis, and thanks to the latest advances in technology, there has been a rapid growth in the number of methods available. This book is aimed at providing users with a practical guide to help them select, and then use, the most suitable method for their application. It explores the principles behind the different forms of optical microscopy, without the use of complex maths, to provide an understanding to help the reader utilise a specific method and then interpret the results. Detailed physics is provided in boxed sections, which can be bypassed by the non-specialist. It is an invaluable tool for use within research groups and laboratories in the life and physical sciences, acting as a first source for practical information to guide less experienced users (or those new to a particular methodology) on the range of techniques available. Features: The first book to cover all current optical microscopy methods for practical applications Written to be understood by a non-optical expert with inserts to provide the physical science background Brings together conventional widefield and confocal microscopy, with advanced non-linear and super resolution methods, in one book To learn more about the author please visit here.
Download or read book Electron Microscopy In Material Science written by U Valdre and published by Elsevier. This book was released on 2012-12-02 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron Microscopy in Material Science covers the proceedings of the International School of Electron Microscopy held in Erice, Itsaly, in 1970. The said conference is intended to the developments of electron optics and electron microscopy and its applications in material science. The book is divided into four parts. Part I discusses the impact of electron microscopy in the science of materials. Part II covers topics such as electron optics and instrumentation; geometric electron optics and its problems; and special electron microscope specimen stages. Part III explains the theory of electron diffraction image contrast and then elaborates on related areas such as the application of electron diffraction and of electron microscopy to radiation; computing methods; and problems in electron microscopy. Part IV includes topics such as the transfer of image information in the electron microscope; phase contrast microscopy; and the magnetic phase contrast. The text is recommended for electron microscopists who are interested in the application of their field in material science, as well as for experts in the field of material science and would like to know about the importance of electron microscopy.
Download or read book Introduction to Optical Microscopy written by Jerome Mertz and published by Cambridge University Press. This book was released on 2019-08 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a fully updated, self-contained textbook covering the core theory and practice of both classical and modern optical microscopy techniques.
Download or read book Optical Microscopy for the Materials Sciences written by James H. Richardson and published by . This book was released on 2000 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Microscopy for the Materials Sciences written by James Harold Richardson and published by . This book was released on 1971 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructural Characterization of Materials written by David Brandon and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.
Download or read book Fundamentals of Light Microscopy and Electronic Imaging written by Douglas B. Murphy and published by . This book was released on 2013 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Principles of Electron Microscopy written by Ray Egerton and published by Springer Science & Business Media. This book was released on 2011-02-11 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning and stationary-beam electron microscopes are indispensable tools for both research and routine evaluation in materials science, the semiconductor industry, nanotechnology and the biological, forensic, and medical sciences. This book introduces current theory and practice of electron microscopy, primarily for undergraduates who need to understand how the principles of physics apply in an area of technology that has contributed greatly to our understanding of life processes and "inner space." Physical Principles of Electron Microscopy will appeal to technologists who use electron microscopes and to graduate students, university teachers and researchers who need a concise reference on the basic principles of microscopy.
Download or read book Nano optics and Near field Optical Microscopy written by Anatoly V. Zayats and published by Artech House. This book was released on 2009 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This groundbreaking book focuses on near-field microscopy which has opened up optical processes at the nanoscale for direct inspection. Further, it explores the emerging area of nano-optics which promises to make possible optical microscopy with true nanometer resolution. This frontline resource helps you achieve high resolution optical imaging of biological species and functional materials. You also find guidance in the imaging of optical device operation and new nanophotonics functionalities"--EBL.
Download or read book Optical Microscopy for the Materials Science written by James H. Richardson and published by . This book was released on 1971 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Force Microscopy Scanning Nearfield Optical Microscopy and Nanoscratching written by Gerd Kaupp and published by Springer Science & Business Media. This book was released on 2006-10-24 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Making a clear distinction is made between nano- and micro-mechanical testing for physical reasons, this monograph describes the basics and applications of the supermicroscopies AFM and SNOM, and of the nanomechanical testing on rough and technical natural surfaces in the submicron range down to a lateral resolution of a few nm. New or improved instrumentation, new physical laws and unforeseen new applications in all branches of natural sciences (around physics, chemistry, mineralogy, materials science, biology and medicine) and nanotechnology are covered as well as the sources for pitfalls and errors. It outlines the handling of natural and technical samples in relation to those of flat standard samples and emphasizes new special features. Pitfalls and sources of errors are clearly demonstrated as well as their efficient remedy when going from molecularly flat to rough surfaces. The academic or industrial scientist learns how to apply the principles for tackling their scientific or manufacturing tasks that include roughness far away from standard samples.
