Download or read book Optical Methods for the Measurement of the Temperature and Concentration Distribution in Combustion Chambers written by Liu Zhengbai and published by . This book was released on 1993 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines written by Hua Zhao and published by SAE International. This book was released on 2012-07-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements. Based on the author’s previous SAE book, Engine Combustion Instrumentation and Diagnostics, this book focuses on laser-based optical techniques for combustion flows and in-cylinder measurements. Included are new chapters on optical engines and optical equipment, case studies, and an updated description of each technique. The purpose of this book is to provide, in one publication, an introduction to experimental techniques that are best suited for in-cylinder engine combustion measurements. It provides sufficient details for readers to set up and apply these techniques to IC engines and combustion flows.
Download or read book Optical Methods for Data Processing in Heat and Fluid Flow written by Clive Greated and published by John Wiley & Sons. This book was released on 2002-08-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical methods are now used routinely for the measurement of velocity, concentration, temperature, and other parameters in wide-ranging areas of industrial research and design such as IC engines, turbines, and combustors. Recent advances such as the use of high-resolution CCD cameras and the extension of flow mapping to three dimensions, make optical tools such as particle image velocimetry increasingly viable for use in the industrial environment. This excellent book presents new developments in optical diagnostic techniques in heat and fluid flow and offers an unparalleled opportunity for industrialists and academic researchers to exchange ideas. CONTENTS INCLUDE: Comparison of injector sprays for gasoline direct-injection engines The design, development, and preliminary results from a high-speed, optically accessed, single cylinder engine The reflected spectrum of complex multi-layered inhomogeneous highly scattering medium Development of full volume digital holography for particle measurement Improved liquid crystal thermography by using true-colour image processing technology Development of an optical measuring technique for the study of acoustical phenomena Spatio-temporal reconstruction of the unsteady wake of axisymmetric bluff bodies via time-recording DPIV Application of particle image velocimetry to helicopter vortex interactions Pulsed laser particle image velocimetry using a fibre-optic delivery system Automated fringe analysis for profilometric mass-transfer experiments.
Download or read book Spectroscopical Determination of Temperature and Oxygen Hydrogen Concentration Distribution in the Combustion Chamber of an Otto engine written by H. May and published by . This book was released on 1978 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines written by Hua Zhao and published by SAE International. This book was released on 2012-07-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements. Based on the author’s previous SAE book, Engine Combustion Instrumentation and Diagnostics, this book focuses on laser-based optical techniques for combustion flows and in-cylinder measurements. Included are new chapters on optical engines and optical equipment, case studies, and an updated description of each technique. The purpose of this book is to provide, in one publication, an introduction to experimental techniques that are best suited for in-cylinder engine combustion measurements. It provides sufficient details for readers to set up and apply these techniques to IC engines and combustion flows.
Download or read book Combustion Engines Development written by Günter P. Merker and published by Springer Science & Business Media. This book was released on 2011-09-24 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engines Development nowadays is based on simulation, not only of the transient reaction of vehicles or of the complete driveshaft, but also of the highly unsteady processes in the carburation process and the combustion chamber of an engine. Different physical and chemical approaches are described to show the potentials and limits of the models used for simulation.
Download or read book Heat Transfer in Radiating and Combusting Systems written by Maria G. Carvalho and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the selected papers presented at the EUROTHERM SEMINAR No. 17 - Heat Transfer in Radiating and Combusting Systems held at Cascais from October 8th- 10th, 1990. The EUROTHERM COMMITTEE was created by representatives of the member countries of the European Communities for the organization and coordination of European Scientific events in the field of thermal sciences and their applications. The book is focused on the integration of the heat transfer and combustion. These two subjects have traditionally been considered separate disciplines. In reality, the two are closely interwoven. The central purpose of the book is to generate an effective cross fertilisation of the two at both the fundamental and applied levels. The book reports on: mathematical simulations of heat transfer in reacting systems, new measurements of and measurement techniques for the radiation properties of the intervening medium, and data and theoretical analyses which clarify the physical nature of the complex interactions between the radiation/convection heat transfer processes and the combustion and turbulence of real reacting flows.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser based Investigation of Gas and Solid Fuel Combustion under Oxy Fuel Atmosphere written by Sebastian Bürkle and published by BoD – Books on Demand. This book was released on 2019-03-11 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion has the potential to reduce the atmospheric CO2-emissions of fossil fuel power plants by burning gaseous or solid fuels under an atmosphere of carbon dioxide and oxygen. The combustion under oxy-fuel operating conditions, however, is accompanied by major changes in the combustion behavior. The underlying chemical and physical processes are complex and highly coupled, which impedes investigations and modeling. Since tactile and most of the optical measurement techniques fail under the sensitive and simultaneously harsh environments of oxy-fuel combustion, an optical in-situ measurement system based on tunable diode laser absorption spectroscopy is developed in this work. This system allows to investigate the thermochemical state of combustion gases with respect to the quantitative concentrations of multiple combustion-relevant gases and the gas temperature. In combination with a newly developed and applied measurement strategy, the system even allows for a measurement of the gas residence time distribution. To improve the measurement accuracy, multiple absorption line parameters are experimentally determined. The measurement system is applied to three oxy-fuel combustion systems. First, the thermochemical state of the laminar, non-premixed methane combustion under oxy-fuel atmosphere is studied. The turbulent, premixed combustion of the same fuel under air and two oxy-fuel atmospheres is studied in a 20 kWth swirled combustor. Measurements of the residence time distribution of fluids in the combustion chamber provide insights into mixing and transport properties of the flow. The thermochemical state reveals insights into the reaction progess and flow mixing. Co-firing of three different solid fuels in an assisting gas flame is investigated for a combined thermal power up to 40 kWth. Here, the char burnout of the particles is investigated. The thermochemical state of the combustion of pure torrefied biomass under air and oxy-fuel combustion atmosphere is investigated in a 60 kWth close-to-application facility and compared to equillibrium calculations.
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2002 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of Atmospheric Emissions written by Heikki Torvela and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the threat of a possible global climate change and the greenhouse effect caused by constituents of anthropogenic origin in the atmosphere, air quality has become a major environmental issue. As a consequence, emissions into the atmosphere need to be monitored and controlled. Measurement of Atmospheric Emissions presents technologies for emission control and analysis from industrial and energy plants. The author explains the physical and chemical basis before proceeding to the practical performance. This publication provides the reader with the knowledge necessary to critically analyze and investigate emission measurement techniques. It will be of great interest to researchers and engineers in the fields of environmental technology and air pollution control. It will assist in the choice of the most appropriate instruments for various purposes and circumstances.
Download or read book Selected Papers on Temperature Sensing optical Methods written by Ronald D. Lucier and published by SPIE-International Society for Optical Engineering. This book was released on 1995 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPIE Milestones are collections of seminal papers from the world literature covering important discoveries and developments in optics and photonics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.
Download or read book Aeronautical Research in Germany written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the pioneering glider flights of Otto Lilienthal (1891) to the advanced avionics of today’s Airbus passenger jets, aeronautical research in Germany has been at the forefront of the birth and advancement of aeronautics. On the occasion of the centennial commemoration of the Wright Brother’s first powered flight (December 1903), this English-language edition of Aeronautical Research in Germany recounts and celebrates the considerable contributions made in Germany to the invention and ongoing development of aircraft. Featuring hundreds of historic photos and non-technical language, this comprehensive and scholarly account will interest historians, engineers, and, also, all serious airplane devotees. Through individual contributions by 35 aeronautical experts, it covers in fascinating detail the milestones of the first 100 years of aeronautical research in Germany, within the broader context of the scientific, political, and industrial milieus. This richly illustrated and authoritative volume constitutes a most timely and substantial overview of the crucial contributions to the foundation and advancement of aeronautics made by German scientists and engineers.
Download or read book Thermo and Fluid Dynamic Processes in Diesel Engines 2 written by James H. Whitelaw and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book edited with a selection of papers from the two-yearly THIESEL Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, organised by CMT-Mvtores Termicos of the Universidad Po/itecnica de Valencia, Spain. This volume includes versions of papers selected from those presented at the THIESEL 2002 Conference th held on lOth to 13 September 2002. We hope it will be the second volume of a long series reflecting the quality of the THIESEL Conference. This year, the papers are grouped in six main thematic areas: State of the Art and Prospective, Injection Systems and Spray Formation, Combustion and Emissions, Engine Modelling, Alternative Combustion Concepts and Experimental Techniques. The actual conference covered a wider scope of topics, including Air Management and Fuels for Diesel Engines and a couple of papers included reflect this variety. However, the selection of papers published here represents the most current preoccupations of Diesel engine designers, namely how to improve the combustion process using new injection strategies and alternative concepts such as the Homogeneous Charge Combustion Ignition.
Download or read book Spectroscopy and Optical Diagnostics for Gases written by Ronald K. Hanson and published by Springer. This book was released on 2015-10-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to the science that governs the interaction of light and matter (in the gas phase). It provides readers with the basic knowledge to exploit the light-matter interaction to develop quantitative tools for gas analysis (i.e. optical diagnostics) and understand and interpret the results of spectroscopic measurements. The authors pair the basics of gas‐phase spectroscopy with coverage of key optical diagnostic techniques utilized by practicing engineers and scientists to measure fundamental flow‐field properties. The text is organized to cover three sub‐topics of gas‐phase spectroscopy: (1) spectral line positions, (2) spectral line strengths, and (3) spectral lineshapes by way of absorption, emission, and scattering interactions. The latter part of the book describes optical measurement techniques and equipment. Key subspecialties include laser induced fluorescence, tunable laser absorption spectroscopy, and wavelength modulation spectroscopy. It is ideal for students and practitioners across a range of applied sciences including mechanical, aerospace, chemical, and materials engineering.
