Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Optical Communications written by M.J.N. Sibley and published by Springer. This book was released on 1990-05-25 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical links are now to be found in short-haul industrial routes, as well as in long-haul telecommunications routes. In order to design and maintain these links, it is important to understand the operation of the individual system components, and this book provides the relevant information.
Download or read book Optical Communications written by Jürgen Franz and published by CRC Press. This book was released on 2000 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of optical communications are many: ultra-high speed, highly reliable information transmission, and cost-effective modulation and transmission links to name but a few. It is no surprise that optical fiber communications systems are now in extensive use all over the world. Along with software and microelectronics, optical communication represents a key technology of modern telecommunication systems. Optical Communications: Components and Systems provides the basic material required for advanced study in theory and applications of optical fiber and space communication systems. After a review of some fundamental background material, component-based chapters discuss all relevant passive and active optical and optoelectronic components used in point-to-point links and in networks. Systems chapters address the analysis and optimization of both incoherent and coherent systems, introduce fiber optic link design, and discuss physical limits. The authors also provide an overview of applications such as optical networks and optical free-space communications. The advanced interactive multimedia communications of today and the future rely on optical fiber and space communication techniques. Optical Communications: Components and Systems offers engineers and physicists a working reference for the selection and design of optical communication systems and provides engineering students with a valuable text that prepares them for work in this essential and rapidly growing field.
Download or read book Advanced Optical Communication Systems and Networks written by Milorad Cvijetic and published by Artech House. This book was released on 2013 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource provides the latest details on 5th generation photonic systems that can be readily applied to projects in the field. Moreover, the book provides valuable, time-saving tools for network simulation and modeling. It includes coverage of optical signal transmission systems and networks; a wide range of critical methods and techniques, such as MIMO (multiple-input and multiple-output) by employing spatial modes in few-mode and multicore optical fiber; OFDM (orthogonal frequency-division multiplexing) utilized to enhance the spectral efficiency and to enable elastic optical networking schemes; and advanced modulation and coding schemes to approach the Shannon's channel capacity limit. There are detailed discussions on the basic principles and applications of high-speed digital signal processing, as well as description of the most relevant post-detection compensation techniques
Download or read book Passive Optical Components for Optical Fiber Transmission written by Norio Kashima and published by Artech House Antenna Library. This book was released on 1995 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses connection technologies used for both single- and multimode fibres and explains multifibre connections such as mass-fusion splice and miltifibre connectors. Coverage includes information on fluoride glass fibres, doped fibres (EDFA) and the components.
Download or read book Optical Components and Transmission Systems APOC 2002 Asia Pacific Optical and Wireless Communications 16 18 October 2002 Shanghai China written by Asia-Pacific Optical and Wireless Communications and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Transmission Systems Engineering written by Milorad Cvijetic and published by Artech House. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is a practitioner's look at this essential aspect of telecommunications. The book offers professionals hands-on guidance in engineering optical networks for optimal performance. Real-world applications illustrate the principles of transmission engineering
Download or read book Optical Transmission Systems Engineering written by Milorad Cvijetic and published by Artech House. This book was released on 2004 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is a practitioner's look at this essential aspect of telecommunications. The book offers professionals hands-on guidance in engineering optical networks for optimal performance. Real-world applications illustrate the principles of transmission engineering
Download or read book Optical Wideband Transmission Systems written by Baack and published by CRC Press. This book was released on 2018-01-18 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with high bit rate systems, which are predestined particularly for the long-distance trunk lines that will be used in future communications networks.
Download or read book Optical Components and Transmission Systems written by WeiSheng Hu and published by SPIE-International Society for Optical Engineering. This book was released on 2002 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmission and Multiplexing TM written by and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Components for Communications written by Ching-Fuh Lin and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Components for Communications is an incomparable book that provides the reader with an understanding of a highly technical subject in a way that is both academically sound and easy to read. Readers with a fundamental understanding of physics from an undergraduate degree will find Dr. Lin's explanation of the principles of quantum physics and optics in this book easy to grasp. This book is also exceptional in its ability to span a subject from the very abstract, fundamental principles of operations to the very specific real world applications of the technology.
Download or read book Digital Transmission Systems From PCM to OTN written by Ayman Elmassarawy and published by Ayman Elmassarawy. This book was released on with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital transmission systems are the backbone of modern communication networks, enabling the exchange of information across various media, such as copper wires, optical fibers, radio waves, and satellites. These systems use digital signals to encode, transmit, and decode data, such as voice, video, text, and images. Digital transmission systems have many advantages over analog systems, such as higher capacity, better quality, lower cost, and more flexibility. However, designing and implementing digital transmission systems is not a trivial task. It requires a solid understanding of the fundamental principles, techniques, and standards that govern the operation and performance of these systems. It also requires a familiarity with the various technologies and components that are used to realize these systems, such as modulation, multiplexing, coding, switching, amplification, and synchronization. This book aims to provide a comprehensive and up-to-date introduction to the fundamentals of digital transmission systems, covering both theoretical and practical aspects. It is intended for students, engineers, and researchers who want to learn the basics of digital transmission systems, as well as for professionals who want to refresh or update their knowledge in this field. The book is also important for communication engineers and operators who are involved in the planning, design, installation, operation, maintenance, and troubleshooting of digital transmission systems and networks. The book covers the most common and widely used standards and technologies in digital transmission, such as PCM, PDH, SDH, OTN, WDM, ADSL, GPON, and radio waves. The book also provides the latest information on the evolution and trends of digital transmission, such as liquid OTN, fiber-optic transmission systems, and digital transmission networks. The book helps communication engineers and operators to understand the principles, advantages, limitations, and challenges of digital transmission systems and to apply them to their specific needs and scenarios. The book is organized into eight chapters, each covering a major topic in digital transmission systems. The chapters are as follows: Chapter 1 introduces the importance, motivations, and overview of digital transmission systems, and provides a conclusion and some questions for review. Chapter 2 explains the fundamentals of pulse code modulation (PCM), which is the most common technique for converting analog signals into digital signals. It also describes the structure and signaling of the 2 Mbit/s (E1) frame, which is the basic unit of transmission in many digital systems. Chapter 3 discusses the plesiochronous digital hierarchy (PDH), which is a legacy standard for multiplexing and transporting digital signals over copper wires or optical fibers. It also covers the frame structure, synchronization, signaling, error detection and correction, network architecture, and limitations of PDH. Chapter 4 introduces the synchronous digital hierarchy (SDH), which is a more advanced and widely adopted standard for multiplexing and transporting digital signals over optical fibers. It also covers the general and specific frame structures, multiplexing hierarchy, network and management, network protections, and synchronization of SDH. Chapter 5 presents optical fiber technology, which is the main medium for transmitting digital signals over long distances and at high speeds. It also covers the technical overview, physics of light, and design and protection of fiber optic cables. Chapter 6 explores the wavelength division multiplexing (WDM) technology, which is a technique for increasing the capacity and efficiency of optical fiber networks by using multiple wavelengths of light. It also covers the WDM and optical fiber structure, active and passive optical components, optical amplification, noise calculation, fiber-optic transmission systems, and fiber-optic networks. Chapter 7 describes the optical transport network (OTN), which is a standard for multiplexing and transporting various types of digital signals over optical fibers using a common format. It also covers the OTN fundamentals, multiplexing overview, frame structure, evolution to liquid OTN, and important topics in OTN. Chapter 8 reviews the ADSL modems, GPON fundamentals, and radio waves propagations, which are some of the technologies and phenomena that are related to digital transmission systems. The book also includes two appendices that provide some supplementary information on BIP, SDH Synchronization, OTN protection and more. The book assumes that the reader has some basic knowledge of mathematics, physics, and electronics, as well as some familiarity with communication systems and networks. The book provides clear explanations, examples, figures, tables, and equations to illustrate the concepts and methods of digital transmission systems. The book also provides questions at the end of each chapter to test the reader’s understanding and to stimulate further exploration. The book is written by who is a Doctor of Electrical Engineering, Egypt. Ayman Elmassarawy has a PhD in communication systems and has over 20 years of research and practical experience in the field of digital transmission systems in the field of digital transmission systems. The book is a valuable resource for anyone who wants to learn the fundamentals of digital transmission systems and to gain a deeper insight into the current and emerging technologies and standards in this field. The book is also a useful reference for anyone who is involved in the design, implementation, operation, or maintenance of digital transmission systems and networks.
Download or read book Introduction to Fiber Optic Communications written by Rongqing Hui and published by Academic Press. This book was released on 2019-09-15 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fiber-Optic Communications provides students with the most up-to-date, comprehensive coverage of modern optical fiber communications and applications, striking a fine balance between theory and practice that avoids excessive mathematics and derivations. Unlike other textbooks currently available, this book covers all of the important recent technologies and developments in the field, including electro-optic modulators, coherent optical systems, and silicon integrated photonic circuits. Filled with practical, relevant worked examples and exercise problems, the book presents complete coverage of the topics that optical and communications engineering students need to be successful. From principles of optical and optoelectronic components, to optical transmission system design, and from conventional optical fiber links, to more useful optical communication systems with advanced modulation formats and high-speed DSP, this book covers the necessities on the topic, even including today's important application areas of passive optical networks, datacenters and optical interconnections. Covers fiber-optic communication system fundamentals, design rules and terminologies Provides students with an understanding of the physical principles and characteristics of passive and active fiber-optic components Teaches students how to perform fiber-optic system design, performance evaluation and troubleshooting Includes modern advances in modulation and decoding strategies
Download or read book Optical Transmission written by António Teixeira and published by Springer Science & Business Media. This book was released on 2011-11-02 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Transmission represents a wide set of visions of researchers who are active in the actual research scene in Europe. An aggregate of highlights of research in transmission with a state of the art presented by the researchers who are driving it are presented. The trends on research are in this book presented by one of the widest networks of excellence put together in Europe in the field of optical networking (more than 40 Research institutions were involved). The readers will find a specialized readout of the current trends and status of transmission ranging from simulation to ultimate experimental results, from modulations to devices. A highlight of Optical Transmission is the introduction in a technical book a chapter on techno-economics, which drives the vision and field a little further. General reading could be made however is more suited for graduated users. The most important features of Optical Transmission are: wide vision on transmission related issues, state of the art and related trends and techniques; techno-economics of the field.
Download or read book Optics Manufacturing written by Christoph Gerhard and published by CRC Press. This book was released on 2017-12-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical components are essential key elements in modern engineering and everyday life. The education of skilled personnel and specialists in the fields of theoretical and practical optics manufacturing is of essential importance for next-generation technologies. Against this background, this book provides the basis for the education and advanced training of precision and ophthalmic optics technicians, craftsmen, and foremen, and it is an extensive reference work for students, academics, optical designers or shop managers, and production engineers. It not only covers particularly used and applied machines, working materials, testing procedures, and machining steps for classical optics manufacturing, but it also addresses the production and specification of optical glasses as well as unconventional production techniques and novel approaches. Optics Manufacturing: Components and Systems furthermore covers the basics of light propagation and provides an overview on optical materials and components; presents an introduction and explanation of the necessary considerations and procedures for the initial definition of manufacturing tolerances and the relevant industrial standards for optics manufacturing; and addresses the production of micro optics, the assembly of opto-mechanical setups and possible manufacturing errors, and the impact of the resulting inaccuracies. In order to allow fast and clear access to the most essential information, each chapter ends with a short summary of the most important aspects, including an explanation of relevant equations, symbols, and abbreviations. For further reading, extensive lists of references are also provided. Finally, exercises on the covered basic principles of optics, approaches, and techniques of optics manufacturing—including their corresponding detailed solutions—are found in the appendix.
Download or read book Optical Fiber Transmission Systems written by Stewart D. Personick and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
