Download or read book Optical Communication over Plastic Optical Fibers written by Mohamed Atef and published by Springer. This book was released on 2012-10-30 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-performance data transmission over plastic optical fibers (POF) using integrated optical receivers having good properties with multilevel modulation, i.e. a higher sensitivity and higher data rate transmission over a longer plastic optical fiber length. Integrated optical receivers and transmitters with high linearity are introduced for multilevel communication. For binary high-data rate transmission over plastic optical fibers, an innovative receiver containing an equalizer is described leading also to a high performance of a plastic optical fiber link. The cheap standard PMMA SI-POF (step-index plastic optical fiber) has the lowest bandwidth and the highest attenuation among multimode fibers. This small bandwidth limits the maximum data rate which can be transmitted through plastic optical fibers. To overcome the problem of the plastic optical fibers high transmission loss, very sensitive receivers must be used to increase the transmitted length over POF. The plastic optical fiber limited bandwidth problem can be decreased by using multilevel signaling like multilevel pulse amplitude modulation or by using an equalizer for binary data transmission.

Download or read book Handbook of Fiber Optic Data Communication written by Silvio Abrate and published by Elsevier Inc. Chapters. This book was released on 2013-08-09 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic or polymer optical fibers (POF) have emerging applications in communication systems. This chapter provides a general overview of the different types of POF existing at both a research and a commercial level. This chapter also discusses in detail the types of POF that are currently the most widely adopted for communications applications. Topics include material sets such as PMMA, step and graded indices POF, and the fiber’s properties including bend radius, mechanical performance, attenuation, and dispersion. POF link designs are considered, including sources and receivers, as well as link budget design considerations. Examples of commercially available products are discussed as well as speculation on future developments in the field.

Download or read book Optical Communication over Plastic Optical Fibers written by Mohamed Atef and published by Springer. This book was released on 2012-10-31 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-performance data transmission over plastic optical fibers (POF) using integrated optical receivers having good properties with multilevel modulation, i.e. a higher sensitivity and higher data rate transmission over a longer plastic optical fiber length. Integrated optical receivers and transmitters with high linearity are introduced for multilevel communication. For binary high-data rate transmission over plastic optical fibers, an innovative receiver containing an equalizer is described leading also to a high performance of a plastic optical fiber link. The cheap standard PMMA SI-POF (step-index plastic optical fiber) has the lowest bandwidth and the highest attenuation among multimode fibers. This small bandwidth limits the maximum data rate which can be transmitted through plastic optical fibers. To overcome the problem of the plastic optical fibers high transmission loss, very sensitive receivers must be used to increase the transmitted length over POF. The plastic optical fiber limited bandwidth problem can be decreased by using multilevel signaling like multilevel pulse amplitude modulation or by using an equalizer for binary data transmission.

Download or read book POF Polymer Optical Fibers for Data Communication written by Olaf Ziemann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by some of the best known POF experts from Germany, one of the leading countries in POF technology, this is the most comprehensive introduction and survey of POF data communication systems currently available. Featuring recent experimental results and over 600 coloured figures and tables.

Download or read book Optical Fiber Communications Principles and Practice written by Edwin Conway and published by Scientific e-Resources. This book was released on 2019-11-05 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of fibre optics communications has exploded over the past two decades. Fibre is an integral part of modern day communication infrastructure and can be found along roads, in buildings, hospitals and machinery. Fibre optic communication has revolutionised the telecommunications industry. It has also made its presence widely felt within the data networking community as well. Using fibre optic cable, optical communications have enabled telecommunications links to be made over much greater distances and with much lower levels of loss in the transmission medium and possibly most important of all, fiber optical communications has enabled much higher data rates to be accommodated. Optical fibers can be used to transmit light and thus information over long distances. Fiber-based systems have largely replaced radio transmitter systems for long-haul optical data transmission. They are widely used for telephony, but also for Internet traffic, long high-speed local area networks (LANs), cable TV (CATV), and increasingly also for shorter distances within buildings. In most cases, silica fibers are used, except for very short distances, where plastic optical fibers can be advantageous. The basic components are light signal transmitter, the optical fiber, and the photo detecting receiver. The additional elements such as fiber and cable splicers and connectors, regenerators, beam splitters, and optical amplifiers are employed to improve the performance of the communication system. The book offers a completely up-to-date, accessible, and in-depth introduction to the principles and applications of optical fiber communications. It describes the recent developments in optical fiber communication materials, devices, components, and systems.

Download or read book Polymer Optical Fibers written by Hari Singh Nalwa and published by . This book was released on 2004 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Optical Fibers summarizes research activities on polymer optical fibers to offer a complete perspective on this emerging topic. Polymer optical fibers are in great demand for the transmission and processing of optical communications compatible with the Internet, which is one of the fastest growing industries of modern times. This book is aimed to bring together, under a single cover, all aspects of plastic optical fibers including different classes of polymers; fiber fabrication techniques; laser sources used for optical fibers, mechanical properties; photosensitivity; poling and second harmonic generation; adhesion; donor-acceptor properties of surfaces; protective coatings; water resistance; stress corrosion; mechanical stability and deformation characteristics; temperature and pressure sensitivity; fiber elongation; optical fiber attenuation; planar optical waveguides; fiber gratings; refractive index distribution and their potential applications in telecommunication and high capacity transmission systems; WDM systems; gigabit ethernet; power splitters and couplers; amplifiers; sensors; filters; lenses; scramblers; integrated optical devices; frequency up-conversion; etc.

Download or read book Optical Fibers Research Advances written by Jürgen C. Schlesinger and published by Nova Publishers. This book was released on 2007 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: An optical fibre is a glass or plastic fibre designed to guide light along its length by confining as much light as possible in a propagating form. In fibre with large core diameter, the confinement is based on total internal reflection. In smaller diameter core fibres, (widely used for most communication links longer than 200 meters) the confinement relies on establishing a waveguide. Fibre optics is the overlap of applied science and engineering concerned with such optical fibres. Optical fibres are widely used in fibre-optic communication, which permits transmission over longer distances and at higher data rates than other forms of wired and wireless communications. They are also used to form sensors, and in a variety of other applications. The term optical fibre covers a range of different designs including graded-index optical fibres, step-index optical fibres, birefringent polarisation-maintaining fibres and more recently photonic crystal fibres, with the design and the wavelength of the light propagating in the fibre dictating whether or not it will be multi-mode optical fibre or single-mode optical fibre. Because of the mechanical properties of the more common glass optical fibres, special methods of splicing fibres and of connecting them to other equipment are needed. Manufacture of optical fibres is based on partially melting a chemically doped pre-form and pulling the flowing material on a draw tower. Fibres are built into different kinds of cables depending on how they will be used. This new book presents the latest research in the field.

Download or read book Optical Communication Theory and Techniques written by Enrico Forestieri and published by Springer Science & Business Media. This book was released on 2006-01-26 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the advent of optical communications, a greattechnological effort has been devoted to the exploitation of the huge bandwidth of optical fibers. Sta- ing from a few Mb/s single channel systems, a fast and constant technological development has led to the actual 10 Gb/s per channel dense wavelength - vision multiplexing (DWDM) systems, with dozens of channels on a single fiber. Transmitters and receivers are now ready for 40 Gb/s, whereas hundreds of channels can be simultaneously amplified by optical amplifiers. Nevertheless, despite such a pace in technological progress, optical c- munications are still in a primitive stage if compared, for instance, to radio communications: the widely spread on-off keying (OOK) modulation format is equivalent to the rough amplitude modulation (AM) format, whereas the DWDM technique is nothing more than the optical version of the frequency - vision multiplexing (FDM) technique. Moreover, adaptive equalization, ch- nel coding or maximum likelihood detection are still considered something “exotic” in the optical world. This is mainly due to the favourable char- teristics of the fiber optic channel (large bandwidth, low attenuation, channel stability, ...), which so far allowed us to use very simple transmission and detection techniques.

Download or read book Plastic Optical Fibers and Applications written by IGIC, Inc. Staff and published by Information Gatekeepers Inc. This book was released on 1994 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Fiber Optics written by Ajoy K. Ghatak and published by Cambridge University Press. This book was released on 1998-06-28 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook on the physical principles of optical fibers - for advanced undergraduates and graduates in physics or electrical engineering.

Download or read book Polymer Optical Fibres written by Christian-Alexander Bunge and published by Woodhead Publishing. This book was released on 2016-08-25 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Optical Fibres: Fibre Types, Materials, Fabrication, Characterization, and Applications explores polymer optical fibers, specifically their materials, fabrication, characterization, measurement techniques, and applications. Optical effects, including light propagation, degrading effects of attenuation, scattering, and dispersion, are explained. Other important parameters like mechanical strength, operating temperatures, and processability are also described. Polymer optical fibers (POF) have a number of advantages over glass fibers, such as low cost, flexibility, low weight, electromagnetic immunity, good bandwidth, simple installation, and mechanical stability. Provides systematic and comprehensive coverage of materials, fabrication, properties, measurement techniques, and applications of POF Focuses on industry needs in communication, illumination and sensors, the automotive industry, and medical and biotechnology Features input from leading experts in POF technology, with experience spanning optoelectronics, polymer, and textiles Explains optical effects, including light propagation, degrading effects of attenuation, scattering, and dispersion

Download or read book Handbook of Optical Fibers written by Gang-Ding Peng and published by Springer. This book was released on 2019-08-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research- and application-oriented book covers main topical areas of optical fibers. The selection of the chapters is weighted on technological and application-specific topics, very much a reflection of where research is heading to and what researchers are looking for. Chapters are arranged in a user-friendly format essentially self-contained and with extensive cross-references. They are organized in the following sections: - Optical Fiber Communication | Editors: Ming-Jun Li and Chao Lu - Solitons and Nonlinear Waves in Optical Fibers | Editor: Boris A. Malomed - Optical Fiber Fabrication | Editor: Hairul Azhar Bin Abdul Rashid - Active Optical Fibers | Editor: Kyunghwan Oh - Special Optical Fibers | Editors: Perry Shum and Zhilin Xu - Optical Fiber Measurement | Editor: Jianzhong Zhang - Optical Fiber Devices | Editors: John Canning and Tuan Guo - Optical Fiber Device Measurement | Editor: Yanhua Luo - Distributed Optical Fiber Sensing | Editor: Yosuke Mizuno - Optical Fiber Sensors for Industrial Applications | Editor: Tong Sun OBE - Polymer Optical Fiber Sensing | Editor: Ginu Rajan - Photonic Crystal Fiber Sensing | Editor: D. N. Wang - Optical Fiber Microfluidic Sensors | Editor: Yuan Gong

Download or read book Fundamentals of Plastic Optical Fibers written by Yasuhiro Koike and published by John Wiley & Sons. This book was released on 2015-02-16 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer photonics is an interdisciplinary field which demands excellence both in optics (photonics) and materials science (polymer). However, theses disciplines have developed independently, and therefore the demand for a comprehensive work featuring the fundamentals of photonic polymers is greater than ever. This volume focuses on Polymer Optical Fiber and their applications. The first part of the book introduces typical optical fibers according to their classifications of material, propagating mode, and structure. Optical properties, the high bandwidth POF and transmission loss are discussed, followed by an outline on the propagating mode characteristics and how they affect the performances of the fiber. The second part of the book reviews conventional materials of POFs and gives an overview on fabrication methods. This is followed by a survey of characterization methods. Based on the characteristics of optical communication systems, the last chapter will concentrate on the many advantages of POF in link and network design. Written by a top expert in the field, this is an invaluable resource for semiconductor physicists, materials scientists, polymer chemists, electrical engineers, and those working in the semiconductor industry.

Download or read book Current Developments in Optical Fiber Technology written by Sulaiman Wadi Harun and published by BoD – Books on Demand. This book was released on 2013-06-13 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of works presenting recent advances and progress in optical fiber technology related to the next generation optical communication, system and network, sensor, laser, measurement, characterization and devices. It contains five sections including optical fiber communication systems and networks, plastic optical fibers technologies, fiber optic sensors, fiber lasers and fiber measurement techniques and fiber optic devices on silicon chip. Each chapter in this book is a contribution from a group of academicians and scientists from a prominent university or research center, involved in cutting edge research in the field of photonics. This compendium is an invaluable reference for researchers and practitioners working in academic institutions as well as industries.

Download or read book Principles of Optical Fiber Measurements written by Dietrich Marcuse and published by Elsevier. This book was released on 2012-12-02 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Optical Fiber Measurements focuses on the optical fiber systems, which are being added to the telephone networks of various countries around the world. This book explores the significance of optical fiber systems in the increasing variety of fiber-related products on the market. Comprised of seven chapters, this book starts with an overview of the fiber fabrication process with emphasis on the method of measurements to reduce fiber loss in the field of optical communication. This text then examines the special methods to measure extremely low dispersion in single-mode fibers. Other chapters consider the measurement requirements of commercial fiber manufacturers to allow them to specify their products as well as for fiber users to verify that they get what they expect. The final chapter deals with the various measurement methods for determining the V value of fibers as well as the geometrical dimensions of fibers and preforms. This book is a valuable resource for specialists and readers who desire a better understanding of fiber specifications.

Download or read book Optoelectronic Circuits in Nanometer CMOS Technology written by Mohamed Atef and published by Springer. This book was released on 2016-03-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the newest implementations of integrated photodiodes fabricated in nanometer standard CMOS technologies. It also includes the required fundamentals, the state-of-the-art, and the design of high-performance laser drivers, transimpedance amplifiers, equalizers, and limiting amplifiers fabricated in nanometer CMOS technologies. This book shows the newest results for the performance of integrated optical receivers, laser drivers, modulator drivers and optical sensors in nanometer standard CMOS technologies. Nanometer CMOS technologies rapidly advanced, enabling the implementation of integrated optical receivers for high data rates of several Giga-bits per second and of high-pixel count optical imagers and sensors. In particular, low cost silicon CMOS optoelectronic integrated circuits became very attractive because they can be extensively applied to short-distance optical communications, such as local area network, chip-to-chip and board-to-board interconnects as well as to imaging and medical sensors.

Download or read book Advanced Optical Communication Systems and Networks written by Milorad Cvijetic and published by Artech House. This book was released on 2013 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource provides the latest details on 5th generation photonic systems that can be readily applied to projects in the field. Moreover, the book provides valuable, time-saving tools for network simulation and modeling. It includes coverage of optical signal transmission systems and networks; a wide range of critical methods and techniques, such as MIMO (multiple-input and multiple-output) by employing spatial modes in few-mode and multicore optical fiber; OFDM (orthogonal frequency-division multiplexing) utilized to enhance the spectral efficiency and to enable elastic optical networking schemes; and advanced modulation and coding schemes to approach the Shannon's channel capacity limit. There are detailed discussions on the basic principles and applications of high-speed digital signal processing, as well as description of the most relevant post-detection compensation techniques