Download or read book OpenSHMEM and Related Technologies OpenSHMEM in the Era of Exascale and Smart Networks written by Stephen Poole and published by Springer Nature. This book was released on 2022-05-19 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 8th OpenSHMEM Workshop, held in virtually in August 2021. The 11 full papers and 1 short paper presented in this book were carefully reviewed and selected for inclusion in this volume from 18 submissions. The papers are organized in the following topical sections: Applications and Implementations, Tools and Benchmarks, and Applications and Implementations.
Download or read book Software for Exascale Computing SPPEXA 2016 2019 written by Hans-Joachim Bungartz and published by Springer Nature. This book was released on 2020-07-30 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the research done and results obtained in the second funding phase of the Priority Program 1648 "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) presented at the SPPEXA Symposium in Dresden during October 21-23, 2019. In that respect, it both represents a continuation of Vol. 113 in Springer’s series Lecture Notes in Computational Science and Engineering, the corresponding report of SPPEXA’s first funding phase, and provides an overview of SPPEXA’s contributions towards exascale computing in today's sumpercomputer technology. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest.
Download or read book Euro Par 2019 written by Ulrich Schwardmann and published by . This book was released on 2020 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter "In Situ Visualization of Performance-Related Data in Parallel CFD Applications" is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book High Performance Computing written by Michela Taufer and published by Springer. This book was released on 2016-10-05 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from 7 workshops that were held in conjunction with the ISC High Performance 2016 conference in Frankfurt, Germany, in June 2016. The 45 papers presented in this volume were carefully reviewed and selected for inclusion in this book. They stem from the following workshops: Workshop on Exascale Multi/Many Core Computing Systems, E-MuCoCoS; Second International Workshop on Communication Architectures at Extreme Scale, ExaComm; HPC I/O in the Data Center Workshop, HPC-IODC; International Workshop on OpenPOWER for HPC, IWOPH; Workshop on the Application Performance on Intel Xeon Phi – Being Prepared for KNL and Beyond, IXPUG; Workshop on Performance and Scalability of Storage Systems, WOPSSS; and International Workshop on Performance Portable Programming Models for Accelerators, P3MA.
Download or read book High Performance Computing written by Michèle Weiland and published by Springer Nature. This book was released on 2019-12-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of 13 workshops held at the 34th International ISC High Performance 2019 Conference, in Frankfurt, Germany, in June 2019: HPC I/O in the Data Center (HPC-IODC), Workshop on Performance & Scalability of Storage Systems (WOPSSS), Workshop on Performance & Scalability of Storage Systems (WOPSSS), 13th Workshop on Virtualization in High-Performance Cloud Computing (VHPC '18), 3rd International Workshop on In Situ Visualization: Introduction and Applications, ExaComm: Fourth International Workshop on Communication Architectures for HPC, Big Data, Deep Learning and Clouds at Extreme Scale, International Workshop on OpenPOWER for HPC (IWOPH18), IXPUG Workshop: Many-core Computing on Intel, Processors: Applications, Performance and Best-Practice Solutions, Workshop on Sustainable Ultrascale Computing Systems, Approximate and Transprecision Computing on Emerging Technologies (ATCET), First Workshop on the Convergence of Large Scale Simulation and Artificial Intelligence, 3rd Workshop for Open Source Supercomputing (OpenSuCo), First Workshop on Interactive High-Performance Computing, Workshop on Performance Portable Programming Models for Accelerators (P^3MA). The 48 full papers included in this volume were carefully reviewed and selected. They cover all aspects of research, development, and application of large-scale, high performance experimental and commercial systems. Topics include HPC computer architecture and hardware; programming models, system software, and applications; solutions for heterogeneity, reliability, power efficiency of systems; virtualization and containerized environments; big data and cloud computing; and artificial intelligence.
Download or read book High Performance Computing written by Ponnuswamy Sadayappan and published by Springer Nature. This book was released on 2020-06-15 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 35th International Conference on High Performance Computing, ISC High Performance 2020, held in Frankfurt/Main, Germany, in June 2020.* The 27 revised full papers presented were carefully reviewed and selected from 87 submissions. The papers cover a broad range of topics such as architectures, networks & infrastructure; artificial intelligence and machine learning; data, storage & visualization; emerging technologies; HPC algorithms; HPC applications; performance modeling & measurement; programming models & systems software. *The conference was held virtually due to the COVID-19 pandemic. Chapters "Scalable Hierarchical Aggregation and Reduction Protocol (SHARP) Streaming-Aggregation Hardware Design and Evaluation", "Solving Acoustic Boundary Integral Equations Using High Performance Tile Low-Rank LU Factorization", "Scaling Genomics Data Processing with Memory-Driven Computing to Accelerate Computational Biology", "Footprint-Aware Power Capping for Hybrid Memory Based Systems", and "Pattern-Aware Staging for Hybrid Memory Systems" are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book OpenMP Conquering the Full Hardware Spectrum written by Xing Fan and published by Springer. This book was released on 2019-08-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 15th International Workshop on Open MP, IWOMP 2019, held in Auckland, New Zealand, in September 2019. The 22 full papers presented in this volume were carefully reviewed and selected for inclusion in this book. The papers are organized in topical sections named: best paper; tools, accelerators, compilation, extensions, tasking, and using OpenMP.
Download or read book High Performance Computing written by Julian M. Kunkel and published by Springer. This book was released on 2016-06-15 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 31st International Conference, ISC High Performance 2016 [formerly known as the International Supercomputing Conference] held in Frankfurt, Germany, in June 2016. The 25 revised full papers presented in this book were carefully reviewed and selected from 60 submissions. The papers cover the following topics: Autotuning and Thread Mapping; Data Locality and Decomposition; Scalable Applications; Machine Learning; Datacenters andCloud; Communication Runtime; Intel Xeon Phi; Manycore Architectures; Extreme-scale Computations; and Resilience.
Download or read book Using OpenMP written by Barbara Chapman and published by MIT Press. This book was released on 2007-10-12 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of OpenMP, the standard application programming interface for shared memory parallel computing—a reference for students and professionals. "I hope that readers will learn to use the full expressibility and power of OpenMP. This book should provide an excellent introduction to beginners, and the performance section should help those with some experience who want to push OpenMP to its limits." —from the foreword by David J. Kuck, Intel Fellow, Software and Solutions Group, and Director, Parallel and Distributed Solutions, Intel Corporation OpenMP, a portable programming interface for shared memory parallel computers, was adopted as an informal standard in 1997 by computer scientists who wanted a unified model on which to base programs for shared memory systems. OpenMP is now used by many software developers; it offers significant advantages over both hand-threading and MPI. Using OpenMP offers a comprehensive introduction to parallel programming concepts and a detailed overview of OpenMP. Using OpenMP discusses hardware developments, describes where OpenMP is applicable, and compares OpenMP to other programming interfaces for shared and distributed memory parallel architectures. It introduces the individual features of OpenMP, provides many source code examples that demonstrate the use and functionality of the language constructs, and offers tips on writing an efficient OpenMP program. It describes how to use OpenMP in full-scale applications to achieve high performance on large-scale architectures, discussing several case studies in detail, and offers in-depth troubleshooting advice. It explains how OpenMP is translated into explicitly multithreaded code, providing a valuable behind-the-scenes account of OpenMP program performance. Finally, Using OpenMP considers trends likely to influence OpenMP development, offering a glimpse of the possibilities of a future OpenMP 3.0 from the vantage point of the current OpenMP 2.5. With multicore computer use increasing, the need for a comprehensive introduction and overview of the standard interface is clear. Using OpenMP provides an essential reference not only for students at both undergraduate and graduate levels but also for professionals who intend to parallelize existing codes or develop new parallel programs for shared memory computer architectures.
Download or read book Using Advanced MPI written by William Gropp and published by MIT Press. This book was released on 2014-11-07 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to advanced features of MPI, reflecting the latest version of the MPI standard, that takes an example-driven, tutorial approach. This book offers a practical guide to the advanced features of the MPI (Message-Passing Interface) standard library for writing programs for parallel computers. It covers new features added in MPI-3, the latest version of the MPI standard, and updates from MPI-2. Like its companion volume, Using MPI, the book takes an informal, example-driven, tutorial approach. The material in each chapter is organized according to the complexity of the programs used as examples, starting with the simplest example and moving to more complex ones. Using Advanced MPI covers major changes in MPI-3, including changes to remote memory access and one-sided communication that simplify semantics and enable better performance on modern hardware; new features such as nonblocking and neighborhood collectives for greater scalability on large systems; and minor updates to parallel I/O and dynamic processes. It also covers support for hybrid shared-memory/message-passing programming; MPI_Message, which aids in certain types of multithreaded programming; features that handle very large data; an interface that allows the programmer and the developer to access performance data; and a new binding of MPI to Fortran.
Download or read book Research Advances in Cloud Computing written by Sanjay Chaudhary and published by Springer. This book was released on 2017-12-28 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the emerging area of cloud computing, providing a comprehensive overview of the research areas, recent work and open research problems. The move to cloud computing is no longer merely a topic of discussion; it has become a core competency that every modern business needs to embrace and excel at. It has changed the way enterprise and internet computing is viewed, and this success story is the result of the long-term efforts of computing research community around the globe. It is predicted that by 2026 more than two-thirds of all enterprises across the globe will be entirely run in cloud. These predictions have led to huge levels of funding for research and development in cloud computing and related technologies. Accordingly, universities across the globe have incorporated cloud computing and its related technologies in their curriculum, and information technology (IT) organizations are accelerating their skill-set evolution in order to be better prepared to manage emerging technologies and public expectations of the cloud, such as new services.
Download or read book Parallel Processing and Applied Mathematics written by Roman Wyrzykowski and published by Springer. This book was released on 2020-03-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 12043 and 12044 constitutes revised selected papers from the 13th International Conference on Parallel Processing and Applied Mathematics, PPAM 2019, held in Bialystok, Poland, in September 2019. The 91 regular papers presented in these volumes were selected from 161 submissions. For regular tracks of the conference, 41 papers were selected from 89 submissions. The papers were organized in topical sections named as follows: Part I: numerical algorithms and parallel scientific computing; emerging HPC architectures; performance analysis and scheduling in HPC systems; environments and frameworks for parallel/distributed/cloud computing; applications of parallel computing; parallel non-numerical algorithms; soft computing with applications; special session on GPU computing; special session on parallel matrix factorizations. Part II: workshop on language-based parallel programming models (WLPP 2019); workshop on models algorithms and methodologies for hybrid parallelism in new HPC systems; workshop on power and energy aspects of computations (PEAC 2019); special session on tools for energy efficient computing; workshop on scheduling for parallel computing (SPC 2019); workshop on applied high performance numerical algorithms for PDEs; minisymposium on HPC applications in physical sciences; minisymposium on high performance computing interval methods; workshop on complex collective systems. Chapters "Parallel adaptive cross approximation for the multi-trace formulation of scattering problems" and "A High-Order Discontinuous Galerkin Solver with Dynamic Adaptive Mesh Refinement to Simulate Cloud Formation Processes" of LNCS 12043 are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Proceedings of the ACM Symposium on Cloud Computing written by Association for Computing Machinery and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Benchmarking Measuring and Optimizing written by Wanling Gao and published by Springer Nature. This book was released on 2020-06-09 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Symposium on Benchmarking, Measuring, and Optimization, Bench 2019, held in Denver, CO, USA, in November 2019. The 20 full papers and 11 short papers presented were carefully reviewed and selected from 79 submissions. The papers are organized in topical sections named: Best Paper Session; AI Challenges on Cambircon using AIBenc; AI Challenges on RISC-V using AIBench; AI Challenges on X86 using AIBench; AI Challenges on 3D Face Recognition using AIBench; Benchmark; AI and Edge; Big Data; Datacenter; Performance Analysis; Scientific Computing.
Download or read book Conquering Big Data with High Performance Computing written by Ritu Arora and published by Springer. This book was released on 2016-09-16 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the resources and research projects that are bringing Big Data and High Performance Computing (HPC) on converging tracks. It demystifies Big Data and HPC for the reader by covering the primary resources, middleware, applications, and tools that enable the usage of HPC platforms for Big Data management and processing.Through interesting use-cases from traditional and non-traditional HPC domains, the book highlights the most critical challenges related to Big Data processing and management, and shows ways to mitigate them using HPC resources. Unlike most books on Big Data, it covers a variety of alternatives to Hadoop, and explains the differences between HPC platforms and Hadoop.Written by professionals and researchers in a range of departments and fields, this book is designed for anyone studying Big Data and its future directions. Those studying HPC will also find the content valuable.
Download or read book Proceedings of the Fourteenth Annual ACM Symposium on Principles of Distributed Computing written by and published by Association for Computing Machinery (ACM). This book was released on 1995 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Sixth ACM Symposium on Cloud Computing written by Shahram Ghandeharizadeh and published by . This book was released on 2015 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
