Download or read book OpenGeoSys Tutorial written by Agnes Sachse and published by Springer. This book was released on 2017-03-07 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the application of the open-source software OpenGeoSys (OGS) for hydrological numerical simulations concerning conservative and reactive transport modeling. It provides general information on the hydrological and groundwater flow modeling of a real case study and step-by-step model set-up with OGS, while also highlighting related components such as the OGS Data Explorer. The material is based on unpublished manuals and the results of a collaborative project between China and Germany (SUSTAIN H2O). Though the book is primarily intended for graduate students and applied scientists who deal with hydrological modeling, it also offers a valuable source of information for professional geoscientists wishing to expand their knowledge of the numerical modeling of hydrological processes including nitrate reactive transport modeling. This book is the second in a series that showcases further applications of computational modeling in hydrological science.
Download or read book OpenGeoSys Tutorial written by Eunseon Jang and published by Springer. This book was released on 2017-10-31 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial provides the application of the coupling interface OGS#IPhreeqc (open-source scientific software) to model reactive mass transport processes in environmental subsurface systems. It contains general information regarding reactive transport modeling and step-by-step model set-up with OGS#IPhreeqc and related components such as GINA and ParaView. Benchmark examples (1D to 2D) are presented in detail. The book is intended primarily for graduate students and applied scientists who deal with reactive transport modeling. It also gives valuable information to the professional geoscientists wishing to advance their knowledge in numerical simulation, with the focus on the fate and transport of nitrate. It is the third volume in a series that represents the further application of computational modeling in hydrological science.
Download or read book Geoenergy Modeling II written by Haibing Shao and published by Springer. This book was released on 2016-10-06 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the numerical modeling of shallow geothermal systems. The utilization of shallow geothermal energy involves the integration of multiple Borehole Heat Exchangers (BHE) with Ground Source Heat Pump (GSHP) systems to provide heating and cooling. The modeling practices explained in this book can improve the efficiency of these increasingly common systems. The book begins by explaining the basic theory of heat transport processes in man-made as well as natural media. . These techniques are then applied to the simulation of borehole heat exchangers and their interaction with the surrounding soil. The numerical and analytical models are verified against analytical solutions and measured data from a Thermal Response Test, and finally, a real test site is analyzed through the model and discussed with regard to BHE and GSHP system design and optimization.
Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2018-03-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises the 3rd collection of benchmarks and examples for porous and fractured media mechanics. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to a wide area of applications in environmental engineering, such as geological waste deposition, geothermal energy utilization (shallow and deep systems), carbon capture and storage (CCS) as well as water resources management and hydrology. In order to assess the feasibility, safety as well as sustainability of geoenvironmental applications, model-based simulation is the only way to quantify future scenarios. This charges a huge responsibility concerning the reliability of conceptual models and computational tools. Benchmarking is an appropriate methodology to verify the quality and validate the concept of models based on best practices. Moreover, benchmarking and code comparison are building strong community links. The 3rd THMC benchmark book also introduces benchmark-based tutorials, therefore the subtitle is selected as “From Benchmarking to Tutoring”. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation. The new version of OGS-6 is introduced and first benchmarks are presented therein (see appendices).
Download or read book Geoenergy Modeling I written by Norbert Böttcher and published by Springer. This book was released on 2016-06-27 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to geothermal modeling deals with flow and heat transport processes in porous and fractured media related to geothermal energy applications. Following background coverage of geothermal resources and utilization in several countries, the basics of continuum mechanics for heat transport processes, as well as numerical methods for solving underlying governing equations are discussed. This examination forms the theoretical basis for five included step-by-step OpenGeoSys exercises, highlighting the most important computational areas within geothermal resource utilization, including heat diffusion, heat advection in porous and fractured media, and heat convection. The book concludes with an outlook on practical follow-up contributions investigating the numerical simulation of shallow and deep geothermal systems.
Download or read book Chinese Water Systems written by Yonghui Song and published by Springer. This book was released on 2018-05-16 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the huge efforts by the Chinese Government concerning the restoration and future sustainable management of Chinese water systems. It presents the results of a Sino-European joint project concerning the Songhuajiang-Liaohe River Basin (SLRB) in Northeast China conducted by the Chinese Research Academy of Environmental Sciences (CRAES), the Helmholtz Centre for Environmental Research - UFZ, Germany, and the Natural Environment Research Council as represented by the Centre for Ecology and Hydrology (CEH), UK. The book explains in great detail the development of risk assessment and corresponding management methods for (i) controlling water pollution, (ii) assessing river health and ecological restoration options, (iii) characterizing persistent organic pollutants (POPs), and (iv) protecting fragile groundwater resources. It also describes the implemented demonstration sites of SLRB during the project course as well as lessons learnt on efficient project management and the dissemination of knowledge and technologies.
Download or read book Proceedings of the 8th International Congress on Environmental Geotechnics Volume 1 written by Liangtong Zhan and published by Springer. This book was released on 2018-10-10 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the 8th International Congress on Environmental Geotechnics (ICEG), held on October 28 - November 1, 2018 in Hangzhou, China. The theme of the congress is “Towards a Sustainable Geoenvironment”, which means meeting the needs of the present generation without compromising the ability of future generations to meet their own needs. Under this theme, the congress covers a broad range of topics and provides an excellent opportunity for academics, engineers, scientists, government officials, regulators, and planners to present, discuss and exchange notes on the latest advances and developments in the research and application of environmental geotechnics.
Download or read book Geoenergy Modeling III written by Norihiro Watanabe and published by Springer. This book was released on 2016-11-10 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical modeling of deep hydrothermal and petrothermal systems in fractured georeservoirs for utilization in Geothermal Energy applications. The authors explain the particular challenges and approaches to modeling heat transport and high-throughput flow in multiply fractured porous rock formations. In order to help readers gain a system-level understanding of the necessary analysis, the authors include detailed examples of growing complexity as the techniques explained in the text are introduced. The coverage culminates with the fully-coupled analysis of real deep geothermal test-sites located in Germany and France.
Download or read book Models of Thermochemical Heat Storage written by Christoph Lehmann and published by Springer. This book was released on 2018-01-23 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermochemical gas-solid reactions, as well as adsorption processes, are currently of significant interest for the design of heat storage systems. This book provides detailed models of these reactions and processes that account for heat and mass transport, chemical and physical reactions, and possible local thermal non-equilibrium. The underlying scientific theory behind the models is explained, laboratory tests are simulated, and methods for high-performance computing are discussed. Applications ranging from seasonal domestic heat storage to diurnally operating systems in concentrating solar power facilities are considered in these models, which are not available through any other sources. Finally, an outlook on future developments highlights emerging technologies.
Download or read book Computational Geotechnics written by Thomas Nagel and published by Springer. This book was released on 2017-04-29 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, effective computational methods to facilitate those pivotal simulations using open-source software are introduced and discussed with a special focus on the coupled thermo-mechanical behavior of the rock salt. A cohesive coverage of applying geotechnical modeling to the subsurface storage of hydrogen produced from renewable energy sources is accompanied by specific, reproducible example simulations to provide the reader with direct access to this fascinating and important field. Energy carriers such as natural gas, hydrogen, oil, and even compressed air can be stored in subsurface geological formations such as depleted oil or gas reservoirs, aquifers, and caverns in salt rock. Many challenges have arisen in the design, safety and environmental impact assessment of such systems, not the least of which is that large-scale experimentation is not a feasible option. Therefore, simulation techniques are central to the design and risk assessment of these and similar geotechnical facilities.
Download or read book Advanced Intelligent Systems for Sustainable Development AI2SD 2018 written by Mostafa Ezziyyani and published by Springer. This book was released on 2019-03-06 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the outcomes of the International Conference on Advanced Intelligent Systems for Sustainable Development (AI2SD-2018), held in Tangier, Morocco on July 12–14, 2018. Presenting the latest research in the field of computing sciences and information technology, it discusses new challenges and provides valuable insights into the field, the goal being to stimulate debate, and to promote closer interaction and interdisciplinary collaboration between researchers and practitioners. Though chiefly intended for researchers and practitioners in advanced information technology management and networking, the book will also be of interest to those engaged in emerging fields such as data science and analytics, big data, internet of things, smart networked systems, artificial intelligence, expert systems and cloud computing.
Download or read book Chinese Water Systems written by TianXiang Yue and published by Springer. This book was released on 2018-10-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the Chinese Water Systems subseries offers up-to-date and comprehensive information on various aspects of the Poyang Lake, the largest freshwater lake in China. Following a detailed introduction of the lake basin, the respective chapters present the findings of studies examining surface and subsurface hydrology, relationships between plant ecology and pollution of the wetlands, changes of land cover as well as the development of modern computational approaches to create Environmental Information Systems for water management. Moreover, the results are supplemented by a wealth of numerical calculations, tables, figures and photographs to make the research results more tangible. Closing with concise information on the “Research Centre for Environmental Information Science” (RCEIS), the book offers a valuable guide for researchers, teachers and professionals working in the areas of water environment, water security and ecological restoration. The projects have been supported by the Sino-German Centre for Science Promotion, the Helmholtz Association and the Chinese Academy of Sciences.
Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model
Download or read book OpenGeoSys Tutorial written by Agnes Sachse and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial on the application of the open-source software OpenGeoSys (OGS) in computational hydrology is based on a one-week training course at the Helmholtz Centre for Environmental Research in Leipzig, Germany. It provides general information regarding hydrological and groundwater flow modeling and the pre-processing and step-by-step model setups of a case study with OGS and related components such as the OGS Data Explorer. The tutorial also illustrates the application of pre- and post-processing tools such as ArcGIS and ParaView. This book is intended primarily for graduate students and applied scientists who deal with hydrological-system analysis and hydrological modeling. It is also a valuable source of information for practicing hydrologists wishing to further their understanding of the numerical modeling of coupled hydrological-hydrogeological systems. This tutorial is the first in a series that will present further OGS applications in environmental sciences.
Download or read book Thermo Hydro Mechanical Chemical Processes in Porous Media written by Olaf Kolditz and published by Springer Science & Business Media. This book was released on 2012-04-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises an assembly of benchmarks and examples for porous media mechanics collected over the last twenty years. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to many applications in environmental engineering, such as geological waste deposition, geothermal energy utilisation, carbon capture and storage, water resources management, hydrology, even climate chance. In order to assess the feasibility as well as the safety of geotechnical applications, process-based modelling is the only tool to put numbers, i.e. to quantify future scenarios. This charges a huge responsibility concerning the reliability of computational tools. Benchmarking is an appropriate methodology to verify the quality of modelling tools based on best practices. Moreover, benchmarking and code comparison foster community efforts. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation.
Download or read book Computational Geotechnics written by Thomas Nagel and published by Springer. This book was released on 2017-05-05 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, effective computational methods to facilitate those pivotal simulations using open-source software are introduced and discussed with a special focus on the coupled thermo-mechanical behavior of the rock salt. A cohesive coverage of applying geotechnical modeling to the subsurface storage of hydrogen produced from renewable energy sources is accompanied by specific, reproducible example simulations to provide the reader with direct access to this fascinating and important field. Energy carriers such as natural gas, hydrogen, oil, and even compressed air can be stored in subsurface geological formations such as depleted oil or gas reservoirs, aquifers, and caverns in salt rock. Many challenges have arisen in the design, safety and environmental impact assessment of such systems, not the least of which is that large-scale experimentation is not a feasible option. Therefore, simulation techniques are central to the design and risk assessment of these and similar geotechnical facilities.
Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2014-11-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book provides guidance to understanding complicated coupled processes based on the experimental data available and implementation of developed algorithms in numerical codes. Results of selected test cases in the fields of closed-form solutions (e.g., deformation processes), single processes (such as groundwater flow) as well as coupled processes are presented. It is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation with the community.
