Download or read book One Dimensional Model and Pulse Generation of a Supercharger written by Martin Hardis and published by . This book was released on 2006 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reduced order model that captures the key aspects of a roots type supercharger has been developed. The goal of this reduced order model is to obtain the greatest computation speed for an acceptable accuracy. Key phenomena that dominate the response in the supercharger were identified first, and then implemented in the reduced order model. The reduced order model was developed based on one dimensional supercharger model from Sorenson. This model was then improved by adding backflow slot features (previously done by Carroll), a carryback slot, and finally a pressure pulse generated by the carryback slot. The output of this model, supercharger performance (volumetric and J1723 isentropic efficiency), was then compared with measured data from Eaton Corporation. The results agree after a supercharger wall temperature is increased with respect to the pressure ratio and rotor speed. This suggests that there is another heat generation source in the supercharger that has not been accounted for in the model, such as mechanical loss due to friction. A further investigation on the supercharger wall temperature needs to be conducted to verify this hypothesis. If the investigation results do not support this hypothesis, other source of heat generation in the supercharger should be investigated.

Download or read book Commencement written by Iowa State University and published by . This book was released on 2006 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Master s Theses Directories written by and published by . This book was released on 2006 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".

Download or read book Nonsteady One dimensional Internal Compressible Flows written by John A. C. Kentfield and published by . This book was released on 1993 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text devoted exclusively to the subject of nonsteady, compressible, internal flow theory and the application of this theory to practical devices. The need for such a text has become apparent with the availability of commercial equipment dependent upon this type of flow phenomena. The book is usable both as a text for graduate level courses and as an introduction for readers wishing to become familiar with nonsteady flow phenomena and their practical applications. This audience consists of mechanical, chemical, and aerospace engineers; and specialists in fluid mechanics. The first and second chapters are introductory in nature, aiming to assist readers conversant with the concepts of steady flow to adjust to unfamiliar events and circumstances while avoiding the finer details of algebraic manipulation. A generalized derivation of the classical method-of-characteristics as applied to one-dimensional, nonsteady, internal flows is included in chapter three. Chapter four is devoted to a study of the various boundary conditions necessary for handling a wide range of problems. Chapter five deals with methods of solution including both graphical and numerical procedures. The remaining five chapters explore specific fields of application. These include pipeline flows, dynamic pressure exchangers, pulse combusters and the tuning of the exhaust and induction systems of reciprocating, and Wankel type, internal combustion engines. Additional nonsteady flow devices are described in the last chapter. All the latter chapters are supported by appropriate references to available literature, including the basic material presented in the first half of the book. When necessary, additional specialized theoretical material is included in each of the special-topics applications-oriented chapters. In order to fulfill the needs of graduate students and their instructors, worked examples are included in addition to exercise problems.

Download or read book Engineering written by and published by . This book was released on 1961 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.

Download or read book Modelling and Control of Switched Reluctance Machines written by Rui Araújo and published by BoD – Books on Demand. This book was released on 2020-09-09 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators.

Download or read book Charging the Internal Combustion Engine written by Hermann Hiereth and published by Springer Science & Business Media. This book was released on 2007-11-04 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of supercharging internal combustion engines. It details charging systems and components, the theoretical basic relations between engines and charging systems, as well as layout and evaluation criteria for best interaction. Coverage also describes recent experiences in design and development of supercharging systems, improved graphical presentations, and most advanced calculation and simulation tools.

Download or read book Handbook of Diesel Engines written by Klaus Mollenhauer and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This machine is destined to completely revolutionize cylinder diesel engine up through large low speed t- engine engineering and replace everything that exists. stroke diesel engines. An appendix lists the most (From Rudolf Diesel’s letter of October 2, 1892 to the important standards and regulations for diesel engines. publisher Julius Springer. ) Further development of diesel engines as economiz- Although Diesel’s stated goal has never been fully ing, clean, powerful and convenient drives for road and achievable of course, the diesel engine indeed revolu- nonroad use has proceeded quite dynamically in the tionized drive systems. This handbook documents the last twenty years in particular. In light of limited oil current state of diesel engine engineering and technol- reserves and the discussion of predicted climate ogy. The impetus to publish a Handbook of Diesel change, development work continues to concentrate Engines grew out of ruminations on Rudolf Diesel’s on reducing fuel consumption and utilizing alternative transformation of his idea for a rational heat engine fuels while keeping exhaust as clean as possible as well into reality more than 100 years ago. Once the patent as further increasing diesel engine power density and was filed in 1892 and work on his engine commenced enhancing operating performance.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1979 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2001 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Western Aerospace written by and published by . This book was released on 1949 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbocharging the Internal Combustion Engine written by Neil Watson and published by . This book was released on 1982 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book U S Government Research and Development Reports written by and published by . This book was released on 1969-04 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Complete Book of Ford Mustang written by Mike Mueller and published by Complete Book Series. This book was released on 2022-01-25 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Complete Book of Ford Mustang, 4th Edition details the development, technical specifications, and history of America’s original pony car, now updated to cover cars through the 2021 model year.

Download or read book U S Government Research Development Reports written by and published by . This book was released on 1969 with total page 1326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.