Download or read book Onboard Diagnostics and Measurement in the Automotive Industry Shipbuilding and Aircraft Construction written by Michael Palocz-Andresen and published by SAE International. This book was released on 2012-07-03 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Onboard Diagnostics and Measurement in the Automotive, Shipbuilding and Aircraft Industries is a unique title which focuses on the direct (OBM) and indirect (OBD) determination of emissions in transportation. It offers the reader a state-of-the- art report on the recent developments concerning the determination of emissions and the estimation of pollutants concentrated in the exhaust pipe, using technologies such as intelligent micro controllers, micro sensors and micro actuators systems on board. Written by Dr. Palocz-Andresen, guest professor of Sustainable Transportation at Leuphana University in Lüneburg, this book is especially useful in understanding how the European Union and the United States address the problem of transport-generated emissions. This book goes beyond the more common emissions issues encountered in the automotive arena (including light duty and heavy commercial vehicles), to expand upon the upcoming and similar concerns derived from air and sea transport. Onboard Diagnostics and Measurements in the Automotive, Shipbuilding and Aircraft Industries is a must-have source of technical information to those studying or working in the areas of transportation technology, sustainability, legislation, environment and climate protection.

Download or read book Onboard Diagnostics and Measurement in the Automotive Industry Shipbuilding and Aircraft Construction written by and published by . This book was released on 19?? with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Onboard Diagnostics and Measurement in the Automotive Industry Shipbuilding and Aircraft Construction written by Michael Palocz-Andresen and published by SAE International. This book was released on 2012-07-03 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Onboard Diagnostics and Measurement in the Automotive, Shipbuilding and Aircraft Industries is a unique title which focuses on the direct (OBM) and indirect (OBD) determination of emissions in transportation. It offers the reader a state-of-the- art report on the recent developments concerning the determination of emissions and the estimation of pollutants concentrated in the exhaust pipe, using technologies such as intelligent micro controllers, micro sensors and micro actuators systems on board. Written by Dr. Palocz-Andresen, guest professor of Sustainable Transportation at Leuphana University in Lüneburg, this book is especially useful in understanding how the European Union and the United States address the problem of transport-generated emissions. This book goes beyond the more common emissions issues encountered in the automotive arena (including light duty and heavy commercial vehicles), to expand upon the upcoming and similar concerns derived from air and sea transport. Onboard Diagnostics and Measurements in the Automotive, Shipbuilding and Aircraft Industries is a must-have source of technical information to those studying or working in the areas of transportation technology, sustainability, legislation, environment and climate protection.

Download or read book Automotive Emissions Regulations and Exhaust Aftertreatment Systems written by John Kasab and published by SAE International. This book was released on 2020-08-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.

Download or read book The Best of COMVEC 2016 Select Technical Papers from the SAE Commercial Vehicle Engineering Congress written by Kevin Jost and published by SAE International. This book was released on 2016-09-24 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection highlights some of the best technical papers that represent the breadth of the entire technical program. Leading industry perspectives are reflected by the corporate contributions that are included in this group, along with a specific focus on connectivity, the theme of the 2016 event. The commercial vehicle industry has always been focused on improving efficiency. These ten characteristic offerings present cutting-edge trends, technologies, and solutions that provide greater benefit and the application of knowledge to solve problems and guide future innovation. These studies are presented by experts from industrial, governmental, and academic partners on topics that include: • Autonomous commercial vehicles • Computational fluid dynamics and aerodynamics for heavy-duty, on-road applications • Fuel and emissions efficiency of medium-duty powertrain configurations • Intelligently controlled air-suspension systems • Improving total cost of ownership by gains in thermal efficiency • New simulation and testing techniques enabling next generation commercial vehicle technology The leadership team has focused on bringing in a broad mixture of participants to COMVEC to discuss current technologies and the future challenges of the commercial vehicle industry. This first of its kind special publication draws on the strength of the event’s program and features ten of the best technical papers from the SAE International Congress.

Download or read book CIS Abstracts written by International Occupational Safety and Health Information Centre and published by . This book was released on 1978 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Directory of Published Proceedings written by and published by . This book was released on 1984 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 1997 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ship Production written by Richard Lee Storch and published by Cornell Maritime Press/Tidewater Publishers. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated (1st ed., 1988) to reflect current information and practice in the shipbuilding industry, this text/reference describes the principles and practice of ship production employing group technology. The system described is a mix of old and new techniques, aimed at optimizing producti

Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 1997 with total page 1102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ensuring Quality to Gain Access to Global Markets written by Martin Kellermann and published by World Bank Publications. This book was released on 2019-04-09 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a modern world with rapidly growing international trade, countries compete less based on the availability of natural resources, geographical advantages, and lower labor costs and more on factors related to firms' ability to enter and compete in new markets. One such factor is the ability to demonstrate the quality and safety of goods and services expected by consumers and confirm compliance with international standards. To assure such compliance, a sound quality infrastructure (QI) ecosystem is essential. Jointly developed by the World Bank Group and the National Metrology Institute of Germany, this guide is designed to help development partners and governments analyze a country's quality infrastructure ecosystems and provide recommendations to design and implement reforms and enhance the capacity of their QI institutions.

Download or read book Ship Construction and Welding written by Nisith R. Mandal and published by Springer. This book was released on 2016-11-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and forming of plates and sections are explained. The concept of line heating for plate bending is introduced.Welding power source characteristics, metal transfer mechanisms, welding parameters and their effects on the fusion zone, weld deposit, and weld bead profile are discussed in detail. Various fusion welding methods, MMAW, GMAW, SAW, Electroslag welding and Electrogas welding and single side welding are explained in detail. Friction stir welding as one of the key methods of solid state welding as applied to aluminum alloys is also addressed. The mechanisms of residual stress formation and distortion are explained in connection with stiffened panel fabrication, with an emphasis on weld induced buckling of thin panels. Further, the basic principles of distortion prevention, in-process distortion control and mitigation techniques like heat sinking, thermo-mechanical tensioning etc. are dealt with in detail. In its final section, the book describes in detail various types of weld defects that are likely to occur, together with their causes and remedial measures. The nondestructive testing methods that are most relevant to ship construction are explained. Lastly, a chapter on accuracy control based on statistical principles is included, addressing the need for a suitable mechanism to gauge the ranges of variations so that one can quantitatively target the end product accuracy.

Download or read book The Social Construction of Technological Systems anniversary edition written by Wiebe E. Bijker and published by MIT Press. This book was released on 2012-05-18 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: An anniversary edition of an influential book that introduced a groundbreaking approach to the study of science, technology, and society. This pioneering book, first published in 1987, launched the new field of social studies of technology. It introduced a method of inquiry—social construction of technology, or SCOT—that became a key part of the wider discipline of science and technology studies. The book helped the MIT Press shape its STS list and inspired the Inside Technology series. The thirteen essays in the book tell stories about such varied technologies as thirteenth-century galleys, eighteenth-century cooking stoves, and twentieth-century missile systems. Taken together, they affirm the fruitfulness of an approach to the study of technology that gives equal weight to technical, social, economic, and political questions, and they demonstrate the illuminating effects of the integration of empirics and theory. The approaches in this volume—collectively called SCOT (after the volume's title) have since broadened their scope, and twenty-five years after the publication of this book, it is difficult to think of a technology that has not been studied from a SCOT perspective and impossible to think of a technology that cannot be studied that way.

Download or read book Noise and Military Service written by Institute of Medicine and published by National Academies Press. This book was released on 2006-01-20 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institute of Medicine carried out a study mandated by Congress and sponsored by the Department of Veterans Affairs to provide an assessment of several issues related to noise-induced hearing loss and tinnitus associated with service in the Armed Forces since World War II. The resulting book, Noise and Military Service: Implications for Hearing Loss and Tinnitus, presents findings on the presence of hazardous noise in military settings, levels of noise exposure necessary to cause hearing loss or tinnitus, risk factors for noise-induced hearing loss and tinnitus, the timing of the effects of noise exposure on hearing, and the adequacy of military hearing conservation programs and audiometric testing. The book stresses the importance of conducting hearing tests (audiograms) at the beginning and end of military service for all military personnel and recommends several steps aimed at improving the military services' prevention of and surveillance for hearing loss and tinnitus. The book also identifies research needs, emphasizing topics specifically related to military service.

Download or read book Monthly Index of Russian Accessions written by and published by . This book was released on 1968 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Index of Russian Accessions written by Library of Congress. Processing Department and published by . This book was released on 1968-10 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Electromagnetic Compatibility EMC written by Terence Rybak and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone who has operated, serviced, or designed an automobile or truck in the last few years has most certainly noticed that the age of electronics in our vehicles is here! Electronic components and systems are used for everything from the traditional entertainment system to the latest in “drive by wire”, to two-way communication and navigation. The interesting fact is that the automotive industry has been based upon mechanical and materials engineering for much of its history without many of the techniques of electrical and electronic engineering. The emissions controls requirements of the 1970’s are generally recognized as the time when electronics started to make their way into the previous mechanically based systems and functions. While this revolution was going on, the electronics industry developed issues and concepts that were addressed to allow interoperation of the systems in the presence of each other and with the external environment. This included the study of electromagnetic compatibility, as systems and components started to have influence upon each other just due to their operation. EMC developed over the years, and has become a specialized area of engineering applicable to any area of systems that included electronics. Many well-understood aspects of EMC have been developed, just as many aspects of automotive systems have been developed. We are now at a point where the issues of EMC are becoming more and more integrated into the automotive industry.