Download or read book On the Mechanisms and Mechanics of Plastic Flow and Fracture written by James Albert Joyce and published by . This book was released on 1974 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Deformation and Fracture of Materials written by Robert W. Cahn and published by Wiley-VCH. This book was released on 1993 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Technology A Comprehensive Treatment Edited by R.W. Cahn, P. Haasen, E.J. Kramer The 18-volume series ‘Materials Science and Technology' is the first in-depth, topic-oriented reference work devoted to this growing interdisciplinary field. A compendium of current, state-of-the-art information, it covers the most important classes of materials: metals, ceramics, glasses, polymers, semiconductors, and composites, from the fundamentals of perfect semiconductors via the physics of defects to "artificial" and amorphous semiconductors. Edited by internationally renowned figures in materials science, this series is sure to establish itself as a seminal work. Volume 6: This volume focuses on the mechanisms of plastic deformation and fatigue affecting the properties and performance of a wide variety of materials. Topics included are: flow stress and work hardening • dislocation patterning • solid solution strengthening • particle strengthening • superplasticity • inelastic deformation • cyclic deformation • fracture mechanisms • friction and wear • high-temperature deformation and creep • deformation and textures of metals at large strains
Download or read book Mechanisms of Deformation and Fracture written by K. E. Easterling and published by Elsevier. This book was released on 2013-10-22 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanisms of Deformation and Fracture contains the proceedings of the Interdisciplinary Conference on the Mechanisms of Deformation and Fracture held at the University of Luleå in Sweden on September 20-22, 1978. The papers explore the mechanisms underlying deformation and fracture of materials such as pearlite, metals, quartz, soils, and rocks. Results of theoretical and experimental studies on topics ranging from electromagnetic detection of low-cycle fatigue to stress and strain distribution in two-phase systems are presented. This book is comprised of 37 chapters and begins with a discussion on the interrelationships among solid mechanics, earth sciences, and material sciences. Subsequent chapters focus on the low-cycle behavior of case hardened steel; deformation and shear of normally consolidated flocculated kaolin; analytical modeling in inelasticity; creep mechanisms in clay; and initiation of crack growth at full plasticity. Plastic flow mechanisms and the rheological properties of the Earth's mantle are also examined, along with the fracture of glassy thermoplastics. The final chapter presents a thermodynamic model of consolidation in cohesive soils. This monograph will be a valuable resource for students and practitioners of mechanical engineering, metallurgy, materials science, and earth sciences.
Download or read book Studies in Large Plastic Flow and Fracture written by Percy Williams Bridgman and published by Cambridge : Harvard University Press. This book was released on 1964 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrating through examples, this book presents a mechanism-based perspective on the broad range of deformation and fracture response of solid polymers. It draws on the results of probing experiments and considers the similar mechanical responses of amorphous metals and inorganic compounds to develop advanced methodology for generating more precise forms of modelling. This, in turn, provides a better fundamental understanding of deformation and fracture phenomena in solid polymers. Such mechanism-based constitutive response forms have far-reaching application potential in the prediction of structural responses and in tailoring special microstructures for tough behaviour. Moreover, they can guide the development of computational codes for deformation processing of polymers at any level. Applications are wide-ranging, from large strain industrial deformation texturing to production of precision micro-fluidic devices, making this book of interest to both advanced graduate students and to practising professionals.
Download or read book Mechanics of Plastic Deformation in Metal Processing written by Erich Gottfried Thomsen and published by . This book was released on 1965 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Behaviour of Polymers written by A.J. Kinloch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over recent years there has been a tremendous upsurge in interest in the fracture behaviour of polymers. One reason for this is the increas ing use of polymers in structural engineering applications, since in such circumstances it is essential to have as complete an understanding as possible of the polymer's fracture behaviour. This book is designed to meet the requirements of those who need to be informed of the latest developments in the field of polymer fracture. It is written particularly for research workers but it should also prove invaluable for advanced students taking final-year undergraduate or postgraduate courses. The main emphasis is upon the use of fracture mechanics in the study of polymer fracture but this approach is then developed to cover the micromechanisms of the fracture process. Particular prominence is given to the relationship between structure, mechanical properties and the mechanics and mechanisms of fracture. The first chapter is a brief introduction which has several aims. One is to introduce polymers to the reader who does not have a strong background in the subject and another is to provide background material that will be used at later stages. The book is then split into two main parts: the first deals with the mechanics and mechanisms whilst the second is concerned with materials. In Part I phenomena such as molecular fracture, fracture mechanics, shear yielding and crazing are covered from a general viewpoint.
Download or read book Plasticity written by E. H. Lee and published by Elsevier. This book was released on 2013-10-22 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity documents the proceedings of the Second Symposium on Naval Structural Mechanics held at Brown University, Rhode Island, 5-7 April 1960. It was sponsored jointly by the Office of Naval Research of the U.S. Navy and Brown University. The symposium was devoted to plasticity. The intention was to provide critical reviews of recent developments in certain areas of plasticity of particular current interest and importance, and to supplement these with short accounts of related current research work. The papers presented at the symposium covered the following areas: atomic theory of plastic flow and fracture; stress-strain relations including thermoplasticity and creep; basic theory including stability and uniqueness; boundary value problems including plates and shells; dynamic loading and plastic waves; and developments in design. Two talks were also held for the purpose of reviewing the present status of application of plasticity in design of naval vessels. The symposium was opened by Captain J. C. Myers on behalf of the Office of Naval Research and by Professor W. Prager on behalf of Brown University. Professor Prager closed the symposium by presenting a brief resume of the main accomplishments and trends in plasticity brought to light during the symposium.
Download or read book Developments in Fracture Mechanics The mechanics and mechanisms of fracture in metals written by G. G. Chell and published by Elsevier Science & Technology. This book was released on 1981 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Science and Technology Plastic Deformation and Fracture of Materials written by Ha?l Mughrabi and published by Wiley-VCH. This book was released on 1996-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Technology A Comprehensive Treatment Edited by R.W. Cahn, P. Haasen, E.J. Kramer The 18-volume series ‘Materials Science and Technology’ is the first in-depth, topic-oriented reference work devoted to this growing interdisciplinary field. A compendium of current, state-of-the-art information, it covers the most important classes of materials: metals, ceramics, glasses, polymers, semiconductors, and composites, from the fundamentals of perfect semiconductors via the physics of defects to "artificial" and amorphous semiconductors. Edited by internationally renowned figures in materials science, this series is sure to establish itself as a seminal work. Volume 6: This volume focuses on the mechanisms of plastic deformation and fatigue affecting the properties and performance of a wide variety of materials. Topics included are: flow stress and work hardening • dislocation patterning • solid solution strengthening • particle strengthening • superplasticity • inelastic deformation • cyclic deformation • fracture mechanisms • friction and wear • high-temperature deformation and creep • deformation and textures of metals at large strains
Download or read book The Relationship Between Plastic Flow and the Fracture Mechanism in Magnesium Oxide Single Crystals written by R. J. STOKES and published by . This book was released on 1959 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics and Mechanisms of Fracture written by Alan F. Liu and published by ASM International. This book was released on 2005-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strain Gradient Plasticity Based Modeling of Damage and Fracture written by Emilio Martínez Pañeda and published by Springer. This book was released on 2017-08-23 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to numerical modeling of size effects in metal plasticity. The main classes of strain gradient plasticity formulations are described and efficiently implemented in the context of the finite element method. A robust numerical framework is presented and employed to investigate the role of strain gradients on structural integrity assessment. The results obtained reveal the need of incorporating the influence on geometrically necessary dislocations in the modeling of various damage mechanisms. Large gradients of plastic strain increase dislocation density, promoting strain hardening and elevating crack tip stresses. This stress elevation is quantified under both infinitesimal and finite deformation theories, rationalizing the experimental observation of cleavage fracture in the presence of significant plastic flow. Gradient-enhanced modeling of crack growth resistance, hydrogen diffusion and environmentally assisted cracking highlighted the relevance of an appropriate characterization of the mechanical response at the small scales involved in crack tip deformation. Particularly promising predictions are attained in the field of hydrogen embrittlement. The research has been conducted at the Universities of Cambridge, Oviedo, Luxembourg, and the Technical University of Denmark, in a collaborative effort to understand, model and optimize the mechanical response of engineering materials.
Download or read book Investigations to Understand the Plastic Deformation and Strengthening Mechanisms of Solid Solution Phases of Titanium written by H. Conrad and published by . This book was released on 1972 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plastic flow and fracture of titanium are reviewed with special attention to the mechanisms which are controlling.
Download or read book Plastic Flow and Fracture in Solids written by Tracy Yerkes Thomas and published by Elsevier Science & Technology. This book was released on 1961 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
Download or read book Investigations to Understand the Plastic Deformation and Strengthening Mechanisms of Solid Solution Phases of Titanium written by H. Conrad and published by . This book was released on 1972 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plastic flow and fracture of titanium are reviewed with special attention to the mechanisms which are controlling.
Download or read book Constitutive Laws of Plastic Deformation and Fracture written by and published by Springer Science & Business Media. This book was released on 1990-02-28 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: 19th Canadian Fracture Conference, Ottawa, Ontario, May 29-31, 1989
