Download or read book On the Effect of Output Quantization in Control Systems written by Geoffrey Alan Williamson and published by . This book was released on 1988 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Sampled Data Control Systems written by Tongwen Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the many techniques for designing linear multivariable analogue controllers, the two most popular optimal ones are H2 and H-infinity optimization. The fact that most new industrial controllers are digital provides strong motivation for adapting or extending these techniques to digital control systems. This book, now available as a corrected reprint, attempts to do so. Part I presents two indirect methods of sampled-data controller design: These approaches include approximations to a real problem, which involves an analogue plant, continuous-time performance specifications, and a sampled-data controller. Part II proposes a direct attack in the continuous-time domain, where sampled-data systems are time-varying. The findings are presented in forms that can readily be programmed in, e.g., MATLAB.
Download or read book Adaptive Control of Dynamic Systems with Uncertainty and Quantization written by Jing Zhou and published by CRC Press. This book was released on 2021-12-15 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a series of innovative technologies and research results on adaptive control of dynamic systems with quantization, uncertainty, and nonlinearity, including the theoretical success and practical development such as the approaches for stability analysis, the compensation of quantization, the treatment of subsystem interactions, and the improvement of system tracking and transient performance. Novel solutions by adopting backstepping design tools to a number of hotspots and challenging problems in the area of adaptive control are provided. In the first three chapters, the general design procedures and stability analysis of backstepping controllers and the basic descriptions and properties of quantizers are introduced as preliminary knowledge for this book. In the remainder of this book, adaptive control schemes are introduced to compensate for the effects of input quantization, state quantization, both input and state/output quantization for uncertain nonlinear systems and are applied to helicopter systems and DC Microgrid. Discussion remarks are provided in each chapter highlighting new approaches and contributions to emphasize the novelty of the presented design and analysis methods. Simulation results are also given in each chapter to show the effectiveness of these methods. This book is helpful to learn and understand the fundamental backstepping schemes for state feedback control and output feedback control. It can be used as a reference book or a textbook on adaptive quantized control for students with some background in feedback control systems. Researchers, graduate students, and engineers in the fields of control, information, and communication, electrical engineering, mechanical engineering, computer science, and others will benefit from this book.
Download or read book Quantization Noise written by Bernard Widrow and published by . This book was released on 2008 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative analysis of quantization (roundoff error), ideal for those working in digital signal processing, control or numerical analysis.
Download or read book System Theory written by Theodore E. Djaferis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Theory: Modeling, Analysis and Control contains thirty-three scientific papers covering a wide range of topics in systems and control. These papers have been contributed to a symposium organized to celebrate Sanjoy K. Mitter's 65th birthday. The following research topics are addressed: distributed parameter systems, stochastic control, filtering and estimation, optimization and optimal control, image processing and vision, hierarchical systems and hybrid control, nonlinear systems, and linear systems. Also included are three survey papers on optimization, nonlinear filtering, and nonlinear systems. Recent advances are reported on the behavioral approach to systems, the relationship between differential games and robust control, estimation of diffusion processes, Markov processes, optimal control, hybrid control, stochastic control, spectral estimation, nonconvex quadratic programming, robust control, control algorithms and quantized linear systems. Innovative explorations are carried out on quantum systems from a control theory perspective, option valuation and hedging, three-dimensional medical visualization, computational structure biology image processing, and hierarchical approaches to complex systems, flow control, scheduling and force feedback in fluid mechanics. The contents reflect on past research accomplishments, current research activity, and future research directions in systems and control theory.
Download or read book Quantization Noise written by Bernard Widrow and published by Cambridge University Press. This book was released on 2008-07-03 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are working in digital signal processing, control or numerical analysis, you will find this authoritative analysis of quantization noise (roundoff error) invaluable. Do you know where the theory of quantization noise comes from, and under what circumstances it is true? Get answers to these and other important practical questions from expert authors, including the founder of the field and formulator of the theory of quantization noise, Bernard Widrow. The authors describe and analyze uniform quantization, floating-point quantization, and their applications in detail. Key features include: • Analysis of floating point round off • Dither techniques and implementation issues analyzed • Offers heuristic explanations along with rigorous proofs, making it easy to understand 'why' before the mathematical proof is given.
Download or read book Recent Advances in Control and Filtering of Dynamic Systems with Constrained Signals written by Ju H. Park and published by Springer. This book was released on 2018-08-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the principle theories and applications of control and filtering problems to address emerging hot topics in feedback systems. With the development of IT technology at the core of the 4th industrial revolution, dynamic systems are becoming more sophisticated, networked, and advanced to achieve even better performance. However, this evolutionary advance in dynamic systems also leads to unavoidable constraints. In particular, such elements in control systems involve uncertainties, communication/transmission delays, external noise, sensor faults and failures, data packet dropouts, sampling and quantization errors, and switching phenomena, which have serious effects on the system’s stability and performance. This book discusses how to deal with such constraints to guarantee the system’s design objectives, focusing on real-world dynamical systems such as Markovian jump systems, networked control systems, neural networks, and complex networks, which have recently excited considerable attention. It also provides a number of practical examples to show the applicability of the presented methods and techniques. This book is of interest to graduate students, researchers and professors, as well as R&D engineers involved in control theory and applications looking to analyze dynamical systems with constraints and to synthesize various types of corresponding controllers and filters for optimal performance of feedback systems.
Download or read book Control System Fundamentals written by William S. Levine and published by CRC Press. This book was released on 2019-01-15 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sifting through the variety of control systems applications can be a chore. Diverse and numerous technologies inspire applications ranging from float valves to microprocessors. Relevant to any system you might use, the highly adaptable Control System Fundamentals fills your need for a comprehensive treatment of the basic principles of control system engineering. This overview furnishes the underpinnings of modern control systems. Beginning with a review of the required mathematics, major subsections cover digital control and modeling. An international panel of experts discusses the specification of control systems, techniques for dealing with the most common and important control system nonlinearities, and digital implementation of control systems, with complete references. This framework yields a primary resource that is also capable of directing you to more detailed articles and books. This self-contained reference explores the universal aspects of control that you need for any application. Reliable, up-to-date, and versatile, Control System Fundamentals answers your basic control systems questions and acts as an ideal starting point for approaching any control problem.
Download or read book Observers in Control Systems written by George Ellis and published by Elsevier. This book was released on 2002-10-16 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Observers are digital algorithms that combine sensor outputs with knowledge of the system to provide results superior to traditional structures, which rely wholly on sensors. Observers have been used in selected industries for years, but most books explain them with complex mathematics. Observers in Control Systems uses intuitive discussion, software experiments, and supporting analysis to explain the advantages and disadvantages of observers. If you are working in controls and want to improve your control systems, observers could be the technology you need and this book will give you a clear, thorough explanation of how they work and how to use them. Control systems and devices have become the most essential part of nearly all mechanical systems, machines, devices and manufacturing systems throughout the world. Increasingly the efficiency of production, the reliability of output and increased energy savings are a direct result of the quality and deployment of the control system. A modern and essential tool within the engineer's kit is the Observer which helps improve the performance and reduce the cost of these systems. George Ellis is the author of the highly successful Control System Design Guide (Second Edition). Unlike most controls books, which are written by control theorists and academics, Ellis is a leading engineer, designer, author and lecturer working in industry directly with the users of industrial motion control systems. Observers in Control Systems is written for all professional engineers and is designed to be utilized without an in-depth background in control theory. This is a "real-world" book which will demonstrate how observers work and how they can improve your control system. It also shows how observers operate when conditions are not ideal and teaches the reader how to quickly tune an observer in a working system. Software Available online: A free updated and enhanced version of the author's popular Visual ModelQ allows the reader to practice the concepts with Visual ModelQ models on a PC. Based on a virtual laboratory, all key topics are demonstrated with more than twenty control system models. The models are written in Visual ModelQ ,and are available on the Internet to every reader with a PC. - Teaches observers and Kalman filters from an intuitive perspective - Explains how to reduce control system susceptibility to noise - Shows how to design an adaptive controller based on estimating parameter variation using observers - Shows how to improve a control system's ability to reject disturbances - Key topics are demonstrated with PC-based models of control systems. The models are written in both MatLab® and ModelQ; models are available free of charge
Download or read book Effects of Structural Flexibility on Launch Vehicle Control Systems written by United States. National Aeronautics and Space Administration and published by . This book was released on 1970 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Control Systems for Electric Drives written by Adel Merabet and published by MDPI. This book was released on 2020-12-07 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides extensive information about advanced control techniques in electric drives. Multiple control and estimation methods are studied for position and speed tracking in different drives. Artificial intelligence tools, such as fuzzy logic and neural networks, are used for specific applications using electric drives.
Download or read book Computer Controlled Systems written by G. Perdikaris and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the book is to provide advanced undergraduate or frrst-year graduate engineering students with a self-contained presentation of the principles fundamental to the analysis, design and implementation of computer controlled systems. The material is also suitable for self-study by practicing engineers and is intended to follow a first course in either linear systems analysis or control systerns. A secondary objective of the book is to provide engineering and/or computer science audiences with the material for a junior/senior-level course in modern systems analysis. Chapters 2, 3, 4, and 5 have been designed with this purposein rnind. The emphasis in such a course is to develop the rnathernatical tools and methods suitable for the analysis and design of real-time systems such as digital filters. Thus, engineers and/or computer scientists who know how to program computers can understand the mathematics relevant to the issue of what it is they are programrning. This is especially important for those who may work in engineering and scientific environments where, for instance, programrning difference equations for real-time applications is becorning increasingly common. A background in linear algebra should be an adequate prerequisite for the systems analysis course. Chapter 1 of the book presents a brief introduction to computer controlled systems. It describes the general issues and terminology relevant to the analysis, design, and implementation of such systems.
Download or read book Frontier Computing written by Jason C. Hung and published by Springer Nature. This book was released on 2022-05-23 with total page 1877 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 11th International Conference on Frontier Computing, held in Seoul, on July 13–17, 2021, and provides comprehensive coverage of the latest advances and trends in information technology, science, and engineering. It addresses a number of broad themes, including communication networks, business intelligence and knowledge management, Web intelligence, and related fields that inspire the development of information technology. The respective contributions cover a wide range of topics: database and data mining, networking and communications, Web and Internet of things, embedded systems, soft computing, social network analysis, security and privacy, optical communication, and ubiquitous/pervasive computing. Many of the papers outline promising future research directions, and the book benefits students, researchers, and professionals alike. Further, it offers a useful reference guide for newcomers to the field.
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer. This book was released on 2010-10-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Analysis and Synthesis of Networked Control Systems written by Yuanqing Xia and published by Springer Science & Business Media. This book was released on 2011-03-14 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Synthesis of Networked Control Systems focuses on essential aspects of this field, including quantization over networks, data fusion over networks, predictive control over networks and fault detection over networks. The networked control systems have led to a complete new range of real-world applications. In recent years, the techniques of Internet of Things are developed rapidly, the research of networked control systems plays a key role in Internet of Things. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. It will be of significant interest to scientists and engineers engaged in the field of Networked Control Systems. Dr. Yuanqing Xia, a professor at Beijing Institute of Technology, has been working on control theory and its applications for over ten years.
Download or read book Handbook of Control Systems Engineering written by Louis C. Westphal and published by Springer Science & Business Media. This book was released on 2001-10-31 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a revision and extension of my 1995 Sourcebook of Control Systems Engineering. Because of the extensions and other modifications, it has been retitled Handbook of Control Systems Engineering, which it is intended to be for its prime audience: advanced undergraduate students, beginning graduate students, and practising engineers needing an understandable review of the field or recent developments which may prove useful. There are several differences between this edition and the first. • Two new chapters on aspects of nonlinear systems have been incorporated. In the first of these, selected material for nonlinear systems is concentrated on four aspects: showing the value of certain linear controllers, arguing the suitability of algebraic linearization, reviewing the semi-classical methods of harmonic balance, and introducing the nonlinear change of variable technique known as feedback linearization. In the second chapter, the topic of variable structure control, often with sliding mode, is introduced. • Another new chapter introduces discrete event systems, including several approaches to their analysis. • The chapters on robust control and intelligent control have been extensively revised. • Modest revisions and extensions have also been made to other chapters, often to incorporate extensions to nonlinear systems.
Download or read book Robust Filtering for Uncertain Systems written by Huijun Gao and published by Springer Science & Business Media. This book was released on 2014-04-10 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides the reader with a systematic treatment of robust filter design, a key issue in systems, control and signal processing, because of the fact that the inevitable presence of uncertainty in system and signal models often degrades the filtering performance and may even cause instability. The methods described are therefore not subject to the rigorous assumptions of traditional Kalman filtering. The monograph is concerned with robust filtering for various dynamical systems with parametric uncertainties and focuses on parameter-dependent approaches to filter design. Classical filtering schemes, like H2 filtering and H¥ filtering, are addressed and emerging issues such as robust filtering with constraints on communication channels and signal frequency characteristics are discussed. The text features: · design approaches to robust filters arranged according to varying complexity level and emphasizing robust filtering in the parameter-dependent framework for the first time; · guidance on the use of special realistic phenomena or factors to describe problems more accurately and to improve filtering performance; · a unified linear matrix inequality formulation of design approaches for easy and effective filter design; · demonstration of the techniques of matrix decoupling technique, the generalized Kalman‒Yakubovich‒Popov lemma, the free weighting matrix technique and the delay modelling approach, in robust filtering; · numerous easy-to-follow simulation examples, graphical and tabular illustrations to help the reader understand the filter design approaches developed; and · an account of emerging issues on robust filtering for research to inspire future investigation. Robust Filtering for Uncertain Systems will be of interest to academic researchers specializing in linear, robust and optimal control and estimation and to practitioners working in tracking and network control or signal filtering, detection and estimation. Graduate students learning control and systems theory, signal processing or applied mathematics will also find the book to be a valuable resource.
