Download or read book Mathematical Modeling of Disperse Two Phase Flows written by Christophe Morel and published by Springer. This book was released on 2015-07-17 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the theoretical foundations of disperse two-phase flows, which are characterized by the existence of bubbles, droplets or solid particles finely dispersed in a carrier fluid, which can be a liquid or a gas. Chapters clarify many difficult subjects, including modeling of the interfacial area concentration. Basic knowledge of the subjects treated in this book is essential to practitioners of Computational Fluid Dynamics for two-phase flows in a variety of industrial and environmental settings. The author provides a complete derivation of the basic equations, followed by more advanced subjects like turbulence equations for the two phases (continuous and disperse) and multi-size particulate flow modeling. As well as theoretical material, readers will discover chapters concerned with closure relations and numerical issues. Many physical models are presented, covering key subjects including heat and mass transfers between phases, interfacial forces and fluid particles coalescence and breakup, amongst others. This book is highly suitable for students in the subject area, but may also be a useful reference text for more advanced scientists and engineers.

Download or read book Two Phase Flow written by Cl Kleinstreuer and published by Routledge. This book was released on 2017-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text provides a unified treatment of the fundamental principles of two-phase flow and shows how to apply the principles to a variety of homogeneous mixture as well as separated liquid-liquid, gas-solid, liquid-solid, and gas-liquid flow problems, which may be steady or transient, laminar or turbulent.Each chapter contains several sample problems, which illustrate the outlined theory and provide approaches to find simplified analytic descriptions of complex two-phase flow phenomena.This well-balanced introductory text will be suitable for advanced seniors and graduate students in mechanical, chemical, biomedical, nuclear, environmental and aerospace engineering, as well as in applied mathematics and the physical sciences. It will be a valuable reference for practicing engineers and scientists. A solutions manual is available to qualified instructors.

Download or read book Rheology written by Frederick R. Eirich and published by Academic Press. This book was released on 2014-05-12 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology: Theory and Applications, Volume 5 focuses on overtly fluid behavior of polymers, including the theory of large deformations, thermoelastic effects, elastic phenomena observed during the extrusion of polymeric melts, and theories of the structure of liquids and glasses. The selection first elaborates on the application of large deformation theory to the thermomechanical behavior of rubberlike polymers and unstable flow of molten polymers. Discussions focus on the mechanism proposed for unstable flow, ripple and associated effects, direct observation of waviness phenomena, empirical behavior of porous, unfilled, and filled rubberlike polymers, and problems connected with the interpretation of mechanical response parameters. The text then examines elasticity effects in polymer extrusion and strength and extensibility of elastomers. The publication takes a look at free volume and polymer rheology and studies of the deformation of crystalline polymers. Topics include the contribution of the two orientation processes to the birefringence, deformation of superstructure, rate of orientation of crystalline regions, free volume and physical state, glass transition and free volume, and reappraisal of time-temperature superposition. The manuscript also elaborates on the deformation and dissipative processes in high polymeric solids and the thermodynamics of deformation. The selection is a vital source of data for researchers interested in the theories and applications of rheology.

Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.

Download or read book Convective Boiling and Condensation written by John G. Collier and published by Clarendon Press. This book was released on 1994-05-19 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Third edition of a well-known and well established text both in industry and for teaching * Fully up-to-date and includes extra problems This book is an aid to heat exchanger design written primarily for design and development engineers in the chemical process, power generation, and refrigeration industries. It provides a comprehensive reference on two-phase flows, boiling, and condensation. The text covers all the latest advances like flows over tube bundles and two-phase heat transfer regarding refrigerants and petrochemicals. Another feature of this third edition is many new problems at chapter ends to enhance its use as a teaching text for graduate and post-graduate courses on two-phase flow and heat transfer. - ;This book is written for practising engineers as a comprehensive reference on two-phase flows, boiling, and condensation. It deals with methods for estimating two-phase flow pressure drops and heat transfer rates. It is a well-known reference book in its third edition and is also used as a text for advanced university courses. Both authors write from practical experience as both are professional engineers. -

Download or read book Detonation and Two Phase Flow written by S Penner and published by Elsevier. This book was released on 2012-12-02 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Astronautics and Rocketry, Volume 6: Detonation and Two-Phase Flow compiles technical papers presented at the ARS Propellants, Combustion, and Liquid Rockets Conference held in Palm Beach, Florida on April 26-28, 1961. This book provides an excellent illustration of research and development on a selected group of problems relating to detonations, two-phase nozzle flow, and combustion in liquid fuel rocket engines. This volume is divided into two parts. Part 1 covers the entire range of physical conditions under which detonation may be initiated or sustained, such as high explosives, solid propellants, liquid sprays, and gases. Experimental and theoretical studies are also discussed, including the significant progress of the basic phenomena involved in transition from deflagration to detonation, and nature of stable detonations in dilute sprays and other systems. The perennial problems associated with high frequency instabilities in liquid fuel rocket engines are considered in Part 2. This publication is valuable to students and investigators working in the field of propulsion research and development.

Download or read book Fundamentals of Dispersed Multiphase Flows written by S. Balachandar and published by Cambridge University Press. This book was released on 2024-03-28 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dispersed multiphase flows are frequently found in nature and have diverse geophysical, environmental, industrial, and energy applications. This book targets a beginning graduate student looking to learn about the physical processes that govern these flows, going from the fundamentals to the state of the art, with many exercises included.

Download or read book Thermo fluid Dynamics of Two Phase Flow written by Mamoru Ishii and published by Springer Science & Business Media. This book was released on 2006-09-28 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for graduate students, scientists and engineers who need in-depth theoretical foundations to solve two-phase problems in various technological systems. Based on extensive research experiences focused on the fundamental physics of two-phase flow, the authors present the detailed theoretical foundation of multi-phase flow thermo-fluid dynamics as they apply to a variety of scenarios, including nuclear reactor transient and accident analysis, energy systems, power generation systems and even space propulsion.

Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2014-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.

Download or read book Advances in Two Phase Flow and Heat Transfer written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, two-phase flow and heat transfer problems associated with two-phase phenomena have been a challenge to many investigators. Two-phase flow applications are found in a wide range of engineering systems, such as nuclear and conventional power plants, evaporators of refrigeration systems and a wide vari ety of evaporative and condensive heat exchangers in the chemical industry. This publication is based on the invited lectures presented at the NATO Advanced Research Workshop on the Advances in Two-Phase Flow and Heat Transfer. The Horkshop was attended by more than 50 leading scientists and practicing engineers who work actively on two-phase flow and heat transfer research and applications in dif ferent sectors (academia, government, industry) of member countries of NATO. Some scientific leaders and experts on the subject matter from the non-NATO countries were also invited. They convened to discuss the state-of-the-art in two-phase flow and heat transfer and formulated recommendations for future research directions. To achieve these goals, invited key papers and a limited number of contributions were presented and discussed. The specific aspects of the subject were treated in depth in the panel sessions, and the unresolved problems identified. Suitable as a practical reference, these volumes incorporate a systematic approach to two-phase flow analysis.

Download or read book In Fascination of Fluid Dynamics written by Arie Biesheuvel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Fascination of Fluid Dynamics contains a collection of papers by international experts in hydrodynamics, based on oral presentations at a symposium held in honour of Professor Leen van Wijngaarden on his 65th birthday. The book begins with a personal sketch of his life and scientific career. It continues with a mixture of papers that address recent developments in various branches of fluid mechanics. Many of the papers cover different aspects of multiphase flows: bubble dynamics, cavitation, bubbles and particles in turbulent flows, suspension flows, and wave phenomena in fluidised beds. Other topics that are addressed include: dynamics of jets, shock waves, MHD turbulence, selforganisation phenomena in 2D turbulence, vortex rings and the thermodynamics of tropical cyclones. This edited volume will be valuable reading for researchers, engineers and students interested in hydrodynamics, and in particular in multiphase flows.

Download or read book Proceedings of the U S Nuclear Regulatory Commission Water Reactor Safety Research Information Meeting written by and published by . This book was released on 1982 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Two Phase Flows and Waves written by Daniel D. Joseph and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IMA Volume in Mathematics and its Applications TWO PHASE FLOWS AND WAVES is based on the proceedings of a workshop which was an integral part of the 1988-89 IMA program on NONLINEAR WAVES. The workshop focussed on the development of waves in flowing composites. We thank the Coordinating Commit tee: James Glimm, Daniel Joseph, Barbara Keyfitz, Andrew Majda, Alan Newell, Peter Olver, David Sattinger and David Schaeffer for planning and implementing the stimulating year-long program. We especially thank the Workshop Organizers, Daniel D. Joseph and David G. Schaeffer for their efforts in bringing together many of the major figures in those research fields in which modelling of granular flows and suspensions is used. Avner Friedman Willard Miller, Jr. PREFACE This Workshop, held from January 3-10,1989 at IMA, focused on the properties of materials which consist of many small solid particles or grains. Let us distinguish the terms granular material and suspension. In the former, the material consists exclusively of solid particles interacting through direct contact with one another, either sustained frictional contacts in the case of slow shearing or collisions in the case of rapid shearing. In suspensions, also called two phase flow, the grains interact with one another primarily through the influence of a viscous fluid which occupies the interstitial space and participates in the flow. (As shown by the lecture of I. Vardoulakis (not included in this volume), the distinction between these two idealized cases is not always clear.

Download or read book Transport Phenomena in Porous Media II written by I. Pop and published by Elsevier. This book was released on 2002-06-20 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport phenomena in porous media continues to be a field which attracts intensive research activity. This is primarily due to the fact that it plays an important and practical role in a large variety of diverse scientific applications. Transport Phenomena in Porous Media II covers a wide range of the engineering and technological applications, including both stable and unstable flows, heat and mass transfer, porosity, and turbulence.Transport Phenomena in Porous Media II is the second volume in a series emphasising the fundamentals and applications of research in porous media. It contains 16 interrelated chapters of controversial, and in some cases conflicting, research, over a wide range of topics. The first volume of this series, published in 1998, met with a very favourable reception. Transport Phenomena in Porous Media II maintains the original concept including a wide and diverse range of topics, whilst providing an up-to-date summary of recent research in the field by its leading practitioners.

Download or read book The Method of Volume Averaging written by S. Whitaker and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase systems dominate nearly every area of science and technology, and the method of volume averaging provides a rigorous foundation for the analysis of these systems. The development is based on classical continuum physics, and it provides both the spatially smoothed equations and a method of predicting the effective transport coefficients that appear in those equations. The text is based on a ten-week graduate course that has been taught for more than 20 years at the University of California at Davis and at other universities around the world. Problems dealing with both the theoretical foundations and the applications are included with each chapter, and detailed solutions for all problems are available from the author. The course has attracted participants from chemical engineering, mechanical engineering, civil engineering, hydrologic science, mathematics, chemistry and physics.

Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.