Download or read book Photostabilization of Polymers written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40-60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. Increasing the stability of polymers and plastics towards heat, light, atmospheric oxygen and other environmental agents and weathering conditions has always been a very important problem. The photochemical instability of most of polymers limits them to outdoor application, where they are photo degraded fast over periods ranging from months to a few years. To the despair of technologists and consumers alike, photodegrada tion and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In many cases, improved methods of preparation and purification of both monomers and polymers yield products of better quality and higher resistance to heat and light. However, without stabilization of polymers by applica tion of antioxidants (to decrease thermal oxidative degradation) and photostabilizers (to decrease photo-oxidative degradation) it would be impossible to employ polymers and plastics in everyday use.
Download or read book Degradation and Stabilisation of PVC written by J. Owen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyvinyl chloride has played a key role in the development of the plastics industry over the past 40 years and continues to be a polymer of major importance. The reasons for its enormous versatility and range of application derive from a combination of the basic structure which gives rise to a relatively tough and rigid material and its ability to accept a range of plasticisers and other additives which can modify its physical characteristics to produce a range of flexible products. Two major problems, however, have tested the skill and ingenuity of PVC technologists since earliest times. One is the thermal instability of the material at the temperatures required for melt processing and fabrication, and the second is the photochemical instability which until recently has limited the potentially large range of outdoor applications. Both problems have been handled in a commercially satisfactory way by the gradual development of a range of stabilisers, lubricants and other processing aids and the high quality material which has resulted has led to massive utilisation of PVC by industry. Totally adequate stabilisation requires a detailed understanding of the mechanisms by which degradation processes are initiated and propagated. Although great advances have been made in this respect in recent years the problem remains incompletely understood. This book presents an account of the present position and the problems which remain to be solved.
Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Download or read book Polyvinylchloride based Blends written by Visakh P. M. and published by Springer Nature. This book was released on 2021-09-23 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes many of the recent research accomplishments in the area of polyvinylchloride (PVC)-based blends and their preparation, characterization and applications. Various sub-topics are addressed, such as the state-of-the-art of PVC based blends, new challenges and opportunities, emphasis being given to the types and sizes of components/fillers and optimum compositions of PVC blends, their processing and structure-properties relationships, modification/compatibilization methods, and possible applications. PVC/thermoplastic based nano, micro and macro blends, PVC membranes, bio-based plasticizers and PVC blends with components from renewable resources are reported. The various chapters in this book are contributed by prominent researchers from industry, academia and government/private research laboratories across the globe. It covers an up-to-date record on the major findings and observations in the field of PVC-based blends.
Download or read book Handbook of Plasticizers written by George Wypych and published by Elsevier. This book was released on 2023-02-08 with total page 917 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Plasticizers, Fourth Edition provides a comprehensive review of the current literature as well as cutting-edge details on plasticizers obtained from renewable resources. The book specifies the typical properties of plasticizers belonging to one of thirty-one groups, including expected properties in a given group. The mechanisms of plasticizers, plasticization production steps, and their material behavior in plasticized systems are outlined, along with theoretical background to help readers understand practical observations and methods of material improvement. Other chapters cover the effects on the physical and mechanical properties of plasticized materials, their use in polymers, processing defects formation, and more. This is an essential professional reference, providing R&D scientists, production chemists, and engineers the information they need to avoid certain plasticizers in applications where they may cause health or material durability problems. In addition, the book shows readers how and where to use plasticizers more effectively. - Provides detailed coverage of thirty-one groups of plasticizers, covering their properties, production, processing, applications, health and environmental aspects - Contains new material on odors in plastic materials and their removal - Includes expanded coverage of plasticizers from renewable resources
Download or read book Microbial Degradation of Plastics written by Ren Wei and published by Frontiers Media SA. This book was released on 2021-03-16 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Poly vinyl chloride based Blends Interpenetrating Polymer Networks IPNs and Gels written by Sabu Thomas and published by Elsevier. This book was released on 2024-03-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly(vinyl chloride)-Based Blends, IPNs, and Gels brings together the latest research on the blending of PVC, covering processing, materials, properties, and applications. This book addresses these challenges and highlights the state-of-the-art in the field, such as the development of eco-friendly micro and nanostructured functional materials based on PVC and advances in experimental and theoretical studies of PVC based-polymer blends. This is a valuable resource for researchers and advanced students in polymer science, chemistry, composite science, and materials science and engineering, as well as R&D professionals, engineers, and scientists working with advanced PVC-based materials across a range of industries. - Offers methodical, in-depth coverage of PVC-based blends, IPNs, and gels with each polymer type - Explains advanced methods for PVC-based materials with improved properties for a range of novel applications - Provides avenues for improved sustainability, discussing PVC from biomass, life cycle, recycling, and other environmental considerations
Download or read book Advances in Waste Management written by Ajay S. Kalamdhad and published by Springer. This book was released on 2018-06-22 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some of the latest technologies in waste management, and emphasizes the benefits that can be gained from the use of recycled products. Divided into four sections, it deals with phytoremediation, acquatic weed management and the treatment of solid- and water-based wastes, such as those arising from agricultural, industrial and medical activities. With its special emphasis on the utilization of recycled products, this volume will be of interest to students, academicians, policy makers and others who have a practical and academic interest in dealing with the waste society generates.
Download or read book Poly Vinyl Chloride Based Composites and Nanocomposites written by Akhina H and published by Springer Nature. This book was released on 2023-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers Poly(vinyl chloride) Fundamentals, Fabrication and characterization of PVC based composites and nanocomposites specifically natural fibre reinforced PVC composites, carbonaceous filler reinforced PVC composites , metal oxide fled PVC composites and nanocomposites etc. This book also covers the conducting PVC composites and recent advances in nanocomposites based on PVC .The rheological, mechanical, barrier, thermal, dielectric behaviour of PVC composites and nanocomposites are discussed in details.
Download or read book Polyvinyl Chloride Degradation written by George Wypych and published by Elsevier Publishing Company. This book was released on 1985 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Polymer Analysis Degradation and Stabilization written by Gennadiĭ Efremovich Zaikov and published by Nova Publishers. This book was released on 2005 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Analysis, Degradation & Stabilization
Download or read book Freshwater Microplastics written by Martin Wagner and published by Springer. This book was released on 2017-11-21 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license. This volume focuses on microscopic plastic debris, also referred to as microplastics, which have been detected in aquatic environments around the globe and have accordingly raised serious concerns. The book explores whether microplastics represent emerging contaminants in freshwater systems, an area that remains underrepresented to date. Given the complexity of the issue, the book covers the current state-of-research on microplastics in rivers and lakes, including analytical aspects, environmental concentrations and sources, modelling approaches, interactions with biota, and ecological implications. To provide a broader perspective, the book also discusses lessons learned from nanomaterials and the implications of plastic debris for regulation, politics, economy, and society. In a research field that is rapidly evolving, it offers a solid overview for environmental chemists, engineers, and toxicologists, as well as water managers and policy-makers.
Download or read book Handbook of Environment Waste Management written by Yung-Tse Hung and published by World Scientific. This book was released on 2014 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Environment and Waste Management, Volume 2, Land and Groundwater Pollution Control, is a comprehensive compilation of topics that are at the forefront of many of the technical advances and practices in solid waste management and groundwater pollution control. These include biosolids management, landfill for solid waste disposal, landfill liners, beneficial reuse of waste products, municipal solid waste recovery and recycling and groundwater remediation. Internationally recognized authorities in the field of environment and waste management contribute chapters in their areas of expertise. This handbook is an essential source of reference for professionals and researchers in the areas of solid waste management and groundwater pollution control, and as a text for advanced undergraduate and graduate courses in these fields.
Download or read book Polymer Degradation and Stabilization written by W. L. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of polymers as an important class of material was inhibited at the first by the premature failure of these versatile compounds in many applications. The deterioration of important properties of both natural and synthetic polymers is the result of irreversible changes in composition and structure of polymers molecules. As a result of these reactions, mechanical, electrical and/or aesthetic properties are degraded beyond acceptable limits. It is now generally recognized that stabilization against degradation is necessary if the useful life of polymers is to be extended sufficiently to meet design requirements for long-term applications. Polymers degrade by a wide variety of mechanisms, several of which affect all polymers through to varying degree. This monograph will concentrate on those degradation mechanisms which result from reactions of polymers with oxygen in its various forms and which are accelerated by heat and/or radiation. Those stabilization mechanisms are discussed which are based on an understanding of degradation reaction mechanisms that are reasonably well established. The stabilization of polymers is still undergoing a transition from an art to a science as mechanisms of degradation become more fully developed. A scientific approach to stabilization can only be approached when there is an understanding of the reactions that lead to degradation. Stabilization against biodegradation and burning will not be discussed since there is not a clear understanding of how polymers degrade under these conditions.
Download or read book Compositional Analysis by Thermogravimetry written by Charles Mansfield Earnest and published by ASTM International. This book was released on 1988 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compositional and Failure Analysis of Polymers written by John Scheirs and published by John Wiley & Sons. This book was released on 2000-10-03 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein Praxisleitfaden der Polymeranalyse für alle, die sich in Polymerlabors mit Analytik, Qualitätskontrolle oder Produktentwicklung beschäftigen. Der Autor erläutert, aus seinem umfangreichen Erfahrungsschatz, welche Probleme in welchen Situationen auftreten können. Viele Fallstudien helfen bei der Anwendung der Erkenntnisse im Laboralltag. Mit einer umfangreichen Datensammlung zu physikalischen Eigenschaften von Polymeren! (07/00)
Download or read book Membrane Technologies and Applications written by Kaustubha Mohanty and published by CRC Press. This book was released on 2011-12-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane technologies play an increasingly important role in unit operations for resource recovery, pollution prevention, and energy production, as well as environmental monitoring and quality control. They are also key component technologies of fuel cells and bioseparation applications. Membrane Technologies and Applications provides essential data and background information on various dimensions of membrane technologies, with a major focus on their practical application. Membranes of inorganic materials offer cost-effective solutions for simple to complex separation problems. This book is designed for anyone interested in water and wastewater treatment, membrane suppliers, as well as students and academics studying the field.
