Download or read book On the Catalytic Activity of Certain Metals and Metallic Oxides written by Harvey Day Royce and published by . This book was released on 1924 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides and Related Solids for Electrocatalytic Water Splitting written by Junlei Qi and published by Elsevier. This book was released on 2022-05-05 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. - Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies - Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering - Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection
Download or read book Catalysis written by James Spivey and published by Royal Society of Chemistry. This book was released on 2020-02-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are required for a variety of applications and researchers are increasingly challenged to find cost effective and environmentally benign catalysts to use. This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight reactions active under oxidative coupling of methane conditions and how they are interlinked, heterogeneous nickel catalysts and their use in laboratory and industry, the reaction mechanism of heterogeneous catalysis with the surface science probe, the concepts of electroless deposition (ED) methods for preparation of true bimetallic catalysts, the general subject of metal-support interactions occurring over ruthenium-based catalysts and benzene as the target volatile organic compound (VOC). Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.
Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.
Download or read book British Chemical Abstracts written by and published by . This book was released on 1927 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book British Abstracts written by and published by . This book was released on 1927 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Electrocatalysis in Fuel Cells written by Minhua Shao and published by MDPI. This book was released on 2018-09-28 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Electrocatalysis in Fuel Cells" that was published in Catalysts
Download or read book Production of N containing Chemicals and Materials from Biomass written by Zhen Fang and published by Springer Nature. This book was released on 2023-09-27 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of studies on state-of-art techniques developed for producing value-added N-containing chemicals and N-doped carbon materials from renewable sources via sustainable technologies. Aiming to improve conversion effectiveness and develop innovative techniques for new value-added N-containing products, topics in the text address recent advances, assess and highlight promising methods or technological strategies, and outline direct conversion routes for conversion of renewable resources to N-containing chemicals and materials. World-renowned authorities, experts, and professionals have contributed individual chapters in selected areas to cover the overall topic comprehensively. In addition to researchers and professionals in the field, educators teaching university courses on biomass transformation, biomass energy, energy materials, heterocyclic chemistry, resource materials and sustainable development and green chemistry will find the text informative with new international perspectives.
Download or read book Heterogeneous Catalytic Redox Reactions written by Vladislav Sadykov and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-10-21 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book brings together cutting-edge research in the area of heterogeneous catalytic redox processes. The first part of the book covers the catalytic properties of transition metal oxides and the techniques for catalysts preparation, such as mechanochemistry, plasmochemistry, hydrothermal treatment, etc. Further the authors focus on mechanisms of heterogeneous redox reactions followed by the overview of industrial applications.
Download or read book Emerging Nanostructured Materials for Energy and Environmental Science written by Saravanan Rajendran and published by Springer. This book was released on 2019-02-07 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental aspects of the diverse ranges of nanostructured materials (0D, 1D, 2D and 3D) for energy and environmental applications in a comprehensive manner written by specialists who are at the forefront of research in the field of energy and environmental science. Experimental studies of nanomaterials for aforementioned applications are discussed along with their design, fabrication and their applications, with a specific focus on catalysis, energy storage and conversion systems. This work also emphasizes the challenges of past developments and directions for further research. It also looks at details pertaining to the current ground – breaking of nanotechnology and future perspectives with a multidisciplinary approach to energy and environmental science and informs readers about an efficient utilization of nanomaterials to deliver solutions for the public.
Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
Download or read book Nanomaterials for Air Remediation written by Abdeltif Amrane and published by Micro and Nano Technologies. This book was released on 2020-01-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Air Remediation provides a comprehensive description of basic knowledge and current research progress in the field of air treatment using nanomaterials. The book explores how nanomaterials are used in various air remediation techniques, including advanced oxidation processes, biological processes, and filtration. It also covers their combined use as nanocatalysts, nanoantibiotics, nanoadsorbents, nanocontainers, nanofiltrations and nanosensors. Major challenges to using nanomaterials for improving air quality on a mass scale, both practical and regulatory, are also presented. This is an important resource for materials scientists and environmental engineers who are looking to understand how nanotechnology is used to enhance air quality. Includes coverage of a wide range of nanomaterials, from biochemical to chemical materials, and nanomaterials supported photocatalysts Discusses how the properties of nanomaterials are being used to make more efficient air purification systems and products Assesses the practical and regulatory challenges of using different types of nanomaterials for air remediation
Download or read book Design of Advanced Photocatalytic Materials for Energy and Environmental Applications written by Juan M. Coronado and published by Springer Science & Business Media. This book was released on 2013-05-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research for the development of more efficient photocatalysts has experienced an almost exponential growth since its popularization in early 1970’s. Despite the advantages of the widely used TiO2, the yield of the conversion of sun power into chemical energy that can be achieved with this material is limited prompting the research and development of a number of structural, morphological and chemical modifications of TiO2 , as well as a number of novel photocatalysts with very different composition. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a systematic account of the current understanding of the relationships between the physicochemical properties of the catalysts and photoactivity. The already long list of photocatalysts phases and their modifications is increasing day by day. By approaching this field from a material sciences angle, an integrated view allows readers to consider the diversity of photocatalysts globally and in connection with other technologies. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a valuable road-map, outlining the common principles lying behind the diversity of materials, but also delimiting the imprecise border between the contrasted results and the most speculative studies. This broad approach makes it ideal for specialist but also for engineers, researchers and students in related fields.
Download or read book Catalytic Activities of Metal Oxides and Some Vanadate Salts in the Vapor Phase Reduction of 1 nitronaphthalene written by Ray Clifford Christena and published by . This book was released on 1951 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heterogeneous Catalysis in Organic Transformations written by Varun Rawat and published by CRC Press. This book was released on 2022-04-26 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the broad challenges around energy and the environment have become the focus of much research, scientists and experts have dedicated their efforts to developing more active and selective catalytic systems for key chemical transformations. For many decades environmentally viable protocols for the synthesis of fine chemicals have been the crux of academic and industrial research. Heterogeneous Catalysis in Organic Transformations serves as an overview of this work, providing a complete description of role of heterogeneous catalysis in organic transformations and offering a review of the current and near future technologies and applications. Discusses the fundamentals of catalysis and compares the advantages and disadvantages of different types of catalyst systems Examines oxide nanoparticles and noble metal nanoparticles Consider organometallic compounds, solid-supported catalysts, and mesoporous materials Describes recent advances in metal-based heterogeneous catalysts and new reactions with possible mechanistic pathways Providing a comprehensive review of heterogeneous catalysis from the basics through recent advances, this book will be of keen interest to undergraduates, graduates, and researchers in chemistry, chemical engineering, and associated fields.
Download or read book Heterogeneous Catalysis of Mixed Oxides written by M. Misono and published by Newnes. This book was released on 2013-02-28 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed oxides are the most widely used catalyst materials for industrial catalytic processes. The principal objective of this book is to describe systematically the mixed oxide catalysts, from their fundamentals through their practical applications. After describing concisely general items concerning mixed oxide and mixed oxide catalysts, two important mixed oxide catalyst materials, namely, heteropolyacids and perovskites, are taken as typical examples and discussed in detail. These two materials have several advantages: 1. They are, respectively, typical examples of salts of oxoacids and double oxide, that is, the two main categories of mixed oxides in solid state chemistry. 2. Both exhibit excellent catalytic performance in nearly crystalline state and are used in several industrial applications. 3. They have studied for many years. In addition, metal oxides functioning as a catalyst support (carrier) are included. Although the supports are very important in practical applications, and tremendous progress has been made in the past decades, few systematic reviews exist. It is notable that heteropolyacids and perovskite exhibit unique performance when used as a support. Fundamental catalytic science and technology and solid state chemistry necessary is presented for the proper understanding of mixed oxide catalysts as well as for R&D. For the latter, the concept of design of practical catalysts is very important. This is considered throughout the book. - Systematically describes design principles of mixed oxide catalysts - Shows how catalysis and solid-state chemistry of metal oxides are inter-related - Covers all useful basic concepts of mixed oxide catalysis
