Download or read book Unconventional Petroleum Geology written by Caineng Zou and published by Elsevier. This book was released on 2017-03-10 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional Petroleum Geology, Second Edition presents the latest research results of global conventional and unconventional petroleum exploration and production. The first part covers the basics of unconventional petroleum geology, its introduction, concept of unconventional petroleum geology, unconventional oil and gas reservoirs, and the origin and distribution of unconventional oil and gas. The second part is focused on unconventional petroleum development technologies, including a series of technologies on resource assessment, lab analysis, geophysical interpretation, and drilling and completion. The third and final section features case studies of unconventional hydrocarbon resources, including tight oil and gas, shale oil and gas, coal bed methane, heavy oil, gas hydrates, and oil and gas in volcanic and metamorphic rocks. - Provides an up-to-date, systematic, and comprehensive overview of all unconventional hydrocarbons - Reorganizes and updates more than half of the first edition content, including four new chapters - Includes a glossary on unconventional petroleum types, including tight-sandstone oil and gas, coal-bed gas, shale gas, oil and gas in fissure-cave-type carbonate rocks, in volcanic reservoirs, and in metamorphic rocks, heavy crude oil and natural bitumen, and gas hydrates - Presents new theories, new methods, new technologies, and new management methods, helping to meet the demands of technology development and production requirements in unconventional plays
Download or read book Composition Geochemistry and Conversion of Oil Shales written by C.E. Snape and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil shales are broadly dermed as petroleum source rocks containing sufficiently high contents of organic matter (above ca 10-15 wt. %) to make utilisation a possibility. Like coal, the world's reserves of oil shales are vast being many times larger than those proven for crude oil. Indeed, some of the largest deposits occur in the USA and Europe where Estonia and Turkey have large reserves. The first recorded interest in oil shale retorting was an English patent in 1694 (Eele, Hancock and Porter, No. 330) which refers to distilling noyle from some kind of stone". The oil shale retorting industry dates back to the middle of the last century, notably Scotland, Estonia, France and Sweden in Europe. Indeed, my own Department at the University of Strathclyde has a historical link with James "Paraffin" Young, the founder of the Scottish oil shale industry who endowed a chair in Applied Chemistry. The growth of the oil industry saw the demise of the oil shale industry in most countries with the notable exception of Estonia, where kukersite has continued to be used for power generation and retorting. However, oil shale utilisation has attracted renewed attention since the early 1970s as a source of transport fuels and chemical feedstocks due to the the long term uncertainties over crude oil supplies.
Download or read book Shale Reservoirs written by John Breyer and published by AAPG. This book was released on 2012-08-20 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardcover plus CD
Download or read book Oil Shale written by and published by . This book was released on 2003 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shale Oil Production Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2012-08-27 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a brief overview of the chemistry, engineering, production, and processing of shale oil, including evolving processes and environmental regulations.
Download or read book Global Chemical Kinetics of Fossil Fuels written by Alan K. Burnham and published by Springer. This book was released on 2017-02-11 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the origin and chemical structure of sedimentary organic matter, how that structure relates to appropriate chemical reaction models, how to obtain reaction data uncontaminated by heat and mass transfer, and how to convert that data into global kinetic models that extrapolate over wide temperature ranges. It also shows applications for in-situ and above-ground processing of oil shale, coal and other heavy fossil fuels. It is essential reading for anyone who wants to develop and apply reliable chemical kinetic models for natural petroleum formation and fossil fuel processing and is designed for course use in petroleum systems modelling. Problem sets, examples and case studies are included to aid in teaching and learning. It presents original work and contains an extensive reanalysis of data from the literature.
Download or read book Shale Oil and Gas written by Vikram Rao and published by RTI Press. This book was released on 2015-08-09 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Promise and the Peril
Download or read book Oil Shale written by and published by . This book was released on 2002 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shale Oil and Gas Production Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2019-11-18 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale Oil and Gas Production Processes delivers the basics on current production technologies and the processing and refining of shale oil. Starting with the potential of formations and then proceeding to production and completion, this foundational resource also dives into the chemical and physical nature of the precursor of oil shale, kerogen, to help users understand and optimize its properties in shale. Rounding out with reporting, in situ retorting, refining and environmental aspects, this book gives engineers and managers a strong starting point on how to manage the challenges and processes necessary for the further development of these complex resources. - Helps readers grasp current research on production from shale formations, including properties and composition - Fill in the gaps between research and practical application, including discussions of existing literature - Includes a glossary to help readers fully understand key concepts
Download or read book Oil Shales and Tar Sands written by United States. Department of Energy and published by . This book was released on 1977 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geomechanics and Hydraulic Fracturing for Shale Reservoirs written by Yu Wang and published by Scientific Research Publishing, Inc. USA. This book was released on 2020-07-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a reference book for advanced graduate students and research engineers in shale gas development or rock mechanical engineering. Globally, there is widespread interest in exploiting shale gas resources to meet rising energy demands, maintain energy security and stability in supply and reduce dependence on higher carbon sources of energy, namely coal and oil. However, extracting shale gas is a resource intensive process and is dependent on the geological and geomechanical characteristics of the source rocks, making the development of certain formations uneconomic using current technologies. Therefore, evaluation of the physical and mechanical properties of shale, together with technological advancements, is critical in verifying the economic viability of such formation. Accurate geomechanical information about the rock and its variation through the shale is important since stresses along the wellbore can control fracture initiation and frac development. In addition, hydraulic fracturing has been widely employed to enhance the production of oil and gas from underground reservoirs. Hydraulic fracturing is a complex operation in which the fluid is pumped at a high pressure into a selected section of the wellbore. The interaction between the hydraulic fractures and natural fractures is the key to fracturing effectiveness prediction and high gas development. The development and growth of a hydraulic fracture through the natural fracture systems of shale is probably more complex than can be described here, but may be somewhat predictable if the fracture system and the development of stresses can be explained. As a result, comprehensive shale geomechanical experiments, physical modeling experiment and numerical investigations should be conducted to reveal the fracturing mechanical behaviors of shale.
Download or read book Oil Shale and Tar Sands written by John Ward Smith and published by . This book was released on 1976 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Gas Shale Reservoirs written by Reza Rezaee and published by John Wiley & Sons. This book was released on 2015-07-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive information about the key exploration, development and optimization concepts required for gas shale reservoirs Includes statistics about gas shale resources and countries that have shale gas potential Addresses the challenges that oil and gas industries may confront for gas shale reservoir exploration and development Introduces petrophysical analysis, rock physics, geomechanics and passive seismic methods for gas shale plays Details shale gas environmental issues and challenges, economic consideration for gas shale reservoirs Includes case studies of major producing gas shale formations
Download or read book The Ordos Basin written by Renchao Yang and published by Elsevier. This book was released on 2021-11-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ordos Basin: Sedimentological Research for Hydrocarbons Exploration provides an overview of sedimentological approaches used in the lacustrine Ordos Basin (but also applicable in other marine and lacustrine basins) to make hydrocarbon exploration more efficient. Oil exploration is becoming increasingly focused on tight sandstone reservoirs and shales. The development of these reservoirs, particularly regarding the sedimentary processes and the resulting sediments, are still poorly understood. Exploration and exploitation of such reservoirs requires new insights into the lateral and vertical facies changes, and as already indicated above, the knowledge surrounding facies and how they change in deep-water environments is still relatively unclear. - Covers several geological aspects so the reader may well understand the context of the various chapters - Explores and explains the important relationship between sedimentology and hydrocarbon explorations - Highlights the significance of sedimentological aspects (facies, porosity, etc.) for basin analysis and the development of energy resources
Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.
Download or read book Synthetic Fuels written by Ronald F. Probstein and published by Courier Corporation. This book was released on 2013-04-15 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the outgrowth of a graduate course the authors taught at the Massachusetts Institute of Technology, was designed to fill an urgent need—the training of engineers in the production of synthetic fuels to replace dwindling supplies of natural ones. The authors presented synthetic fuels as a unified engineering subject, while recognizing that many of its principles are well-understood aspects of various engineering fields. The presentation begins with a review of chemical and physical fundamentals and conversion fundamentals, and proceeds to coal gasification and gas upgrading. Subsequent chapters examine liquids and clean solids produced from coal, liquids obtained from oil shale and tar sands, biomass conversion, and environmental, economic, and related aspects of synthetic fuel use. The text is directed toward beginning graduate students and advanced undergraduates in chemical and mechanical engineering, but should also appeal to students from other disciplines, including environmental, mining, petroleum, and industrial engineering, as well as chemistry. It also serves as a reference and guide for professionals.
Download or read book Oil Shale Technology written by Sunggyu Lee and published by CRC Press. This book was released on 1990-12-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental and engineering aspects of shale oil extraction, as well as the mathematical clarification of the complex transport mechanisms involved in oil shale pyrolysis. The influence of the chemical and physical environment on the enhancement of oil yield is explained, and ex situ and in situ technologies are reviewed and compared. The discussion on ex situ shale oil extraction includes both thermal and chemical extraction techniques such as retorting, solvent, and supercritical extraction. Parallels are drawn between the processes available for recovering and using other fossil fuel sources, such as coal and tar sands, and oil shale. In addition to covering the characteristics of oil shale, Oil Shale Technology summarizes the physical and chemical properties of shale oil obtained from various deposits around the world. The influence of the retorting process on the properties of the resulting oil shale is discussed, as are standardized techniques for determining these properties. Engineers, geologists, chemists, chemical engineers, and other researchers in the petroleum and chemical industries should consider this book an important reference resource.
