Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essentials of Oil and Gas Utilities written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2016-02-03 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every oil and gas refinery or petrochemical plant requires sufficient utilities support in order to maintain a successful operation. A comprehensive utilities complex must exist to distribute feedstocks, discharge waste streams, and remains an integrated part of the refinery's infrastructure. Essentials of Oil and Gas Utilities explains these support systems and provides essential information on their essential requirements and process design. This guide includes water treatment plants, condensate recovery plants, high pressure steam boilers, induced draft cooling towers, instrumentation/plant air compressors, and units for a refinery fuel gas and oil systems. In addition, the book offers recommendations for equipment and flow line protection against temperature fluctuations and the proper preparation and storage of strong and dilute caustic solutions. Essentials of Oil and Gas Utilities is a go-to resource for engineers and refinery personnel who must consider utility system design parameters and associated processes for the successful operations of their plants. - Discusses gaseous and liquid fuel systems used to provide heat for power generation, steam production and process requirements - Provides a design guide for compressed air systems used to provide air to the various points of application in sufficient quantity and quality and with adequate pressure for efficient operation of air tools or other pneumatic devices. - Explains the water systems utilized in plant operations which include water treatment systems or raw water and plant water system; cooling water circuits for internal combustion engines, reciprocating compressors, inter- cooling and after-cooling facilities; and "Hot Oil" and "Tempered Water" systems
Download or read book Petroleum and Gas Field Processing written by H.K. Abdel-Aal and published by CRC Press. This book was released on 2003-07-03 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The immediate product extracted from oil and gas wells consists of mixtures of oil, gas, and water that is difficult to transport, requiring a certain amount of field processing. This reference analyzes principles and procedures related to the processing of reservoir fluids for the separation, handling, treatment, and production of quality petroleum oil and gas products. It details strategies in equipment selection and system design, field development and operation, and process simulation and control to increase plant productivity and safety and avoid losses during purification, treatment, storage, and export. Providing guidelines for developing efficient and economical treatment systems, the book features solved design examples that demonstrate the application of developed design equations as well as review problems and exercises of key engineering concepts in petroleum field development and operation.
Download or read book Oil and Gas Processing Equipment written by G. Unnikrishnan and published by CRC Press. This book was released on 2020-09-14 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas industries apply several techniques for assessing and mitigating the risks that are inherent in its operations. In this context, the application of Bayesian Networks (BNs) to risk assessment offers a different probabilistic version of causal reasoning. Introducing probabilistic nature of hazards, conditional probability and Bayesian thinking, it discusses how cause and effect of process hazards can be modelled using BNs and development of large BNs from basic building blocks. Focus is on development of BNs for typical equipment in industry including accident case studies and its usage along with other conventional risk assessment methods. Aimed at professionals in oil and gas industry, safety engineering, risk assessment, this book Brings together basics of Bayesian theory, Bayesian Networks and applications of the same to process safety hazards and risk assessment in the oil and gas industry Presents sequence of steps for setting up the model, populating the model with data and simulating the model for practical cases in a systematic manner Includes a comprehensive list on sources of failure data and tips on modelling and simulation of large and complex networks Presents modelling and simulation of loss of containment of actual equipment in oil and gas industry such as Separator, Storage tanks, Pipeline, Compressor and risk assessments Discusses case studies to demonstrate the practicability of use of Bayesian Network in routine risk assessments
Download or read book Handbook of Natural Gas Transmission and Processing written by Saeid Mokhatab and published by Gulf Professional Publishing. This book was released on 2012-07-02 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, well-documented, and forward-thinking work, the second edition of Handbook of Natural Gas Transmission and Processing continues to present a thoroughly updated, authoritative, and comprehensive description of all major aspects of natural gas transmission and processing. It provides an ideal platform for engineers, technologists, and operations personnel working in the natural gas industry to get a better understanding of any special requirements for optimal design and operations of natural gas transmission pipelines and processing plants. First book of its kind that covers all aspects of natural gas transmission and processing Provides pivotal updates on the latest technologies, which have not been addressed in-depth in any existing books Offers practical advice for design and operation based on sound engineering principles and established techniques Examines ways to select the best processing route for optimal design of gas-processing plants Contains new discussions on process modeling, control, and optimization in gas processing industry
Download or read book Standard Handbook of Petroleum Natural Gas Engineering written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 1996 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents the mathematics and general engineering and science of petroleum engineering. It also examines the auxiliary equipment and provides coverage of all aspects of drilling and well completion.
Download or read book Personnel Protection and Safety Equipment for the Oil and Gas Industries written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2015-05-21 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas companies are repeatedly cited by regulatory organizations for poor training and maintenance on providing personal protective equipment to their refinery workers. Managers of refinery and petrochemical plants are responsible for instructing their workers with the types of equipment available, how to properly wear the equipment, how to properly care and maintain the equipment, and, most importantly, it's their responsibility to enforce these regulations and safety requirements. While there are many reference materials on the subject, most are too broad to apply directly to the unique and highly volatile atmosphere of an oil and gas operation. Personnel Protection and Safety Equipment for the Oil and Gas Industries answers the call for safety managers onsite as well as workers to understand all the safety equipment available specifically for the energy sector. Condensed into one convenient reference location, this training guide is designed to inform on several types of personnel protective clothing, firefighting protective clothing, respiratory protective devises available as well as many other types of protective equipment, including fall protection and vehicle safety belts and harnesses. Industry-specific examples, multiple illustrations, and a glossary of terms make Personnel Protection and Safety Equipment for the Oil and Gas Industries a must-have on every oil and gas operation. - Know recommended US and international protective safety equipment regulations - Learn the types, classes, and materials of safety and protective equipment specific to the oil and gas industry - Gain knowledge on how to select, test, maintain, and store protective equipment properly
Download or read book Oil and Gas Production in Nontechnical Language written by Martin Raymond and published by Pennwell Books. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of the entire petroleum production function; explains the origins of oil and gas and reservoir dynamics; deciphers the mysteries of production ownership and land rights; and identifies the types of production companies and staff positions, and how they interact. --From publisher description.
Download or read book Gas Sweetening and Processing Field Manual written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2011-10-26 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigorous exposition of all natural gas sweetness processes.
Download or read book Process Safety in Upstream Oil and Gas written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book makes the case for process safety and provides a brief overviews of the upstream industry and of CCPS Risk Based Process Safety. The majority of the book focuses on the concepts of implementing process safety in wells, onshore, offshore, and projects. Topics include Overview of Upstream Operations; Overview of Risk Based Process Safety (RBPS); Application of RBPS in Drilling, Completions, Work-Overs & Interventions, Application of RBPS in Onshore Production, Application of RBPS in Offshore Production, Application of RBPS to Engineering Design, Installation, and Construction, Future Developments in the Field
Download or read book Petroleum Engineering Handbook written by Larry W. Lake and published by . This book was released on 2006 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Petroleum Engineering Handbook has long been recognized as a valuable comprehensive reference book that offers practical day-to-day applications for students and experienced engineering professionals alike. Available now in 7 Volumes, Volume 1 covers General Engineering topics including chapters on mathematics, fluid properties (fluid sampling techniques; properties and correlations of oil, gas, condensate, and water; hydrocarbon phase behavior and phase diagrams for hydrocarbon systems; the phase behavior of water/hydrocarbon systems; and the properties of waxes, asphaltenes, and crude oil emulsions), rock properties (bulk rock properties, permeability, relative permeability, and capillary pressure), the economic and regulatory environment, and the role of fossil energy in the 21st century energy mix.
Download or read book Dictionary of Oil Gas and Petrochemical Processing written by Alireza Bahadori and published by CRC Press. This book was released on 2013-12-04 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industry, miscommunication can cause frustration, create downtime, and even trigger equipment failure. By providing a common ground for more effective discourse, the Dictionary of Oil, Gas, and Petrochemical Processing can help eliminate costly miscommunication.An essential resource for oil, gas, and petrochemical industry professionals, enginee
Download or read book Flow Assurance Solids in Oil and Gas Production written by Jon Steinar Gudmundsson and published by CRC Press. This book was released on 2017-09-13 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precipitation and deposition of solids are a major challenge in the production of oil and gas. Flow assurance solids are formed because of unavoidable changes in temperature, pressure and composition of the oil-gas-water flowstream, from reservoir conditions to processing conditions. The advent of subsea production and the increased exploitation of heavy crudes have made flow assurance issues dominant in ensuring efficient and safe exploitation of hydrocarbon assets. Five troublesome flow assurance solids are described in the book: asphaltene, paraffin wax, natural gas hydrate, naphthenate and inorganic scale. These big-five solids are presented in stand-alone chapters. Each chapter is designed to be readable without clutter. Derivations of equations and descriptions of supporting details are given in several appendices. The book is intended for professional engineers and natural scientist working in E&P companies, engineering companies, service companies and specialized companies. An understanding of the big-five solids is required throughout the lifetime of oil and gas assets, from early development to abandonment. The technical, safety and environmental risks associated with deposition problems in near-wellbore formations, production tubing, wellhead equipment, flowlines and processing facilities, are relevant for decisions in the oil and gas industry and in outside regulatory and financial entities.
Download or read book Working Guide to Petroleum and Natural Gas Production Engineering written by William Lyons and published by Gulf Professional Publishing. This book was released on 2009-09-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Petroleum and Natural Gas Production Engineering provides an introduction to key concepts and processes in oil and gas production engineering. It begins by describing correlation and procedures for predicting the physical properties of natural gas and oil. These include compressibility factor and phase behavior, field sampling process and laboratory measurements, and prediction of a vapor-liquid mixture. The book discusses the basic parameters of multiphase fluid flow, various flow regimes, and multiphase flow models. It explains the natural flow performance of oil, gas, and the mixture. The final chapter covers the design, use, function, operation, and maintenance of oil and gas production facilities; the design and construction of separators; and oil and gas separation and treatment systems. - Evaluate well inflow performance - Guide to properties of hydrocarbon mixtures - Evaluate Gas production and processing facilities
Download or read book Natural Gas Processing written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2014-05-05 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas is considered the dominant worldwide bridge between fossil fuels of today and future resources of tomorrow. Thanks to the recent shale boom in North America, natural gas is in a surplus and quickly becoming a major international commodity. Stay current with conventional and now unconventional gas standards and procedures with Natural Gas Processing: Technology and Engineering Design. Covering the entire natural gas process, Bahadori's must-have handbook provides everything you need to know about natural gas, including: - Fundamental background on natural gas properties and single/multiphase flow factors - How to pinpoint equipment selection criteria, such as US and international standards, codes, and critical design considerations - A step-by-step simplification of the major gas processing procedures, like sweetening, dehydration, and sulfur recovery - Detailed explanation on plant engineering and design steps for natural gas projects, helping managers and contractors understand how to schedule, plan, and manage a safe and efficient processing plant - Covers both conventional and unconventional gas resources such as coal bed methane and shale gas - Bridges natural gas processing with basic and advanced engineering design of natural gas projects including real world case studies - Digs deeper with practical equipment sizing calculations for flare systems, safety relief valves, and control valves
Download or read book Practical Engineering Management of Offshore Oil and Gas Platforms written by Naeim Nouri Samie and published by Gulf Professional Publishing. This book was released on 2016-05-06 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Engineering Management of Offshore Oil and Gas Platforms delivers the first must-have content to the multiple engineering managers and clients devoted to the design, equipment, and operations of offshore oil and gas platforms. Concepts explaining how to interact with the various task forces, getting through bid proposals, and how to maintain project control are all covered in the necessary training reference. Relevant equipment and rule of thumb techniques to calculate critical features on the design of the platform are also covered, including tank capacities and motor power, along with how to consistently change water, oil, and gas production profiles over the course of a project. The book helps offshore oil and gas operators and engineers gain practical understanding of the multiple disciplines involved in offshore oil and gas projects using experience-based approaches and lessons learned. - Delivers the first ever must-have content to the multiple engineering managers and clients devoted to the design, equipment, and operations of offshore oil and gas platforms - Contains rules of thumb techniques to calculate critical features on the design of the platform - Includes practical checklists for project estimates and cost evaluation for effective project execution in budgeting and scheduling - Helps offshore oil and gas operators and engineers gain practical understanding of the multiple disciplines involved in offshore oil and gas projects using experience-based approaches and lessons learned
Download or read book Machine Learning and Data Science in the Oil and Gas Industry written by Patrick Bangert and published by Gulf Professional Publishing. This book was released on 2021-03-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Learning and Data Science in the Oil and Gas Industry explains how machine learning can be specifically tailored to oil and gas use cases. Petroleum engineers will learn when to use machine learning, how it is already used in oil and gas operations, and how to manage the data stream moving forward. Practical in its approach, the book explains all aspects of a data science or machine learning project, including the managerial parts of it that are so often the cause for failure. Several real-life case studies round out the book with topics such as predictive maintenance, soft sensing, and forecasting. Viewed as a guide book, this manual will lead a practitioner through the journey of a data science project in the oil and gas industry circumventing the pitfalls and articulating the business value. - Chart an overview of the techniques and tools of machine learning including all the non-technological aspects necessary to be successful - Gain practical understanding of machine learning used in oil and gas operations through contributed case studies - Learn change management skills that will help gain confidence in pursuing the technology - Understand the workflow of a full-scale project and where machine learning benefits (and where it does not)
