Download or read book Combustion Theory written by Forman A. Williams and published by CRC Press. This book was released on 2018-03-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Theory delves deeper into the science of combustion than most other texts and gives insight into combustions from a molecular and a continuum point of view. The book presents derivations of the basic equations of combustion theory and contains appendices on the background of subjects of thermodynamics, chemical kinetics, fluid dynamics, and transport processes. Diffusion flames, reactions in flows with negligible transport and the theory of pre-mixed flames are treated, as are detonation phenomena, the combustion of solid propellents, and ignition, extinction, and flamibility pehnomena.
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Technology and its Applications written by Yufei Ma and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has become more and more important in scientific research and industrial applications. Now, the laser wavelength can cover the range from ultraviolet to terahertz and output laser performance has significantly progressed in recent years. This book is focused on the advanced diode laser, fiber laser, and their applications in laser ablation, laser-introduced fluorescence, and laser treatment. The advantages of laser technology are shown comprehensively.
Download or read book Laser Diagnostics for Combustion Temperature and Species written by Alan C. Eckbreth and published by CRC Press. This book was released on 1996-10-10 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on spectroscopically-based, spatially-precise, laser techniques for temperature and chemical composition measurements in reacting and non-reacting flows, this book makes these powerful and important new tools in combustion research
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Combustion Diagnostics written by KoHse-HoingHaus and published by Taylor & Francis US. This book was released on 2002-04-26 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measurement schemes; and engineers, who know combustion systems and processes. This book assists in providing guidance for the planning of combustion experiments, in judging research strategies and in conceiving new ideas for combustion research. It provides a snapshot of the available diagnostic methods and thier typical applications from the perspective of leading experts in the field.
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 2024-11-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Industrial Applications of Laser Diagnostics written by Yoshihiro Deguchi and published by Taylor & Francis. This book was released on 2016-04-19 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tighter regulations of harmful substances such as NOx, CO, heavy metals, particles, emissions from commercial plants and automobiles reflect a growing demand for lowering the anthropogenic burdens on the environment. It is equally important to monitor controlling factors to improve the operation of industrial machinery and plants. Among the many me
Download or read book New Trends in Instrumentation for Hypersonic Research written by A. Boutier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the growing interest in hypersonic flows, the AGARD Fluid Dynamics Panel initiated a sub-working group on instrumentation for hypersonics in 1989. This sub-group, chaired by J. WENDT (VKI -Belgium), was composed of: A. BOUTIER (ONERA -France), K. BUTEFISCH (DLR -Germany), R. CATTOLICA (SANDIA Lab. -USA), V. CLINE (AEDC -USA), A. GIRARD (ONERA -France), R. McKENZIE (NASA Ames -USA), S. OCHELTREE (NASA Langley -USA) and G. SMEETS (ISL -Franco-German Inst.). As a result of several meetings, the idea came to organize this workshop, 27th April - 1st May 1992, on "New Trends in Instrumentation for Hypersonic Research", at Le Fauga-Mauzac ONERA center, in France, where the new hot-shot arc-heated facility F4, as well as a new conference building, were recently completed. This workshop has been organized in close connection with the AGARD FDP Symposium to be held in Torino 4 - 8 May 1992 on "Theoretical and Experimental Methods in Hypersonic Flows": the main conclusions and ideas expressed by the papers and during the discussions of this workshop are reported in session 7 and have been presented in Torino in a special Instrumentation session. As chairman of this workshop, I express many thanks to the Organizing Committee composed of Karl BUTEFISCH, Andre GIRARD, Stewart OCHELTREE and John WENDT for their very constructive help, leading to a meeting that was recognized to be very fruitful for all the participants.
Download or read book Applied Optical Measurements written by Markus Lehner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a compilation of important optical techniques applied to experiments in heat and mass transfer, multiphase flow and combustion. The emphasis of this book is on the application of these techniques to various engineering problems. The contributions are aiming to provide practicing engineers, both in industry and research, with the recent state of science in the application of advanced optical measurements. The book is written by selected specialists representing leading experts in this field who present new information for the possibilities of these techniques and give stimulation of new ideas for their application.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1995 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unsteady Combustion written by F. Culick and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers prepared for the NATO Advanced Study Institute on "Unsteady Combustion", which was held in Praia da Granja, Portugal, 6-17 September 1993. Approximately 100 delegates from 14 countries attended. The Institute was the most recent in a series beginning with "Instrumentation for Combustion and Flow in Engines", held in Vimeiro, Portugal 1987 and followed by "Combusting Flow Diagnostics" conducted in Montechoro, Portugal in 1990. Together, these three Institutes have covered a wide range of experimental and theoretical topics arising in the research and development of combustion systems with particular emphasis on gas-turbine combustors and internal combustion engines. The emphasis has evolved roughly from instrumentation and experimental techniques to the mixture of experiment, theory and computational work covered in the present volume. As the title of this book implies, the chief aim of this Institute was to provide a broad sampling of problems arising with time-dependent behaviour in combustors. In fact, of course, that intention encompasses practically all possibilities, for "steady" combustion hardly exists if one looks sufficiently closely at the processes in a combustion chamber. The point really is that, apart from the excellent paper by Bahr (Chapter 10) discussing the technology of combustors for aircraft gas turbines, little attention is directed to matters of steady performance. The volume is divided into three parts devoted to the subjects of combustion-induced oscillations; combustion in internal combustion engines; and experimental techniques and modelling.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1986 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Fluid Dynamics 2019 2020 written by Bjørn H. Hjertager and published by MDPI. This book was released on 2021-02-25 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the successful submissions to a Special Issue of Energies entitled “Engineering Fluid Dynamics 2019–2020”. The topic of engineering fluid dynamics includes both experimental and computational studies. Of special interest were submissions from the fields of mechanical, chemical, marine, safety, and energy engineering. We welcomed original research articles and review articles. After one-and-a-half years, 59 papers were submitted and 31 were accepted for publication. The average processing time was about 41 days. The authors had the following geographical distribution: China (15); Korea (7); Japan (3); Norway (2); Sweden (2); Vietnam (2); Australia (1); Denmark (1); Germany (1); Mexico (1); Poland (1); Saudi Arabia (1); USA (1); Serbia (1). Papers covered a wide range of topics including analysis of free-surface waves, bridge girders, gear boxes, hills, radiation heat transfer, spillways, turbulent flames, pipe flow, open channels, jets, combustion chambers, welding, sprinkler, slug flow, turbines, thermoelectric power generation, airfoils, bed formation, fires in tunnels, shell-and-tube heat exchangers, and pumps.
