Download or read book Principles of Plasma Diagnostics written by I. H. Hutchinson and published by Cambridge University Press. This book was released on 2005-07-14 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic introduction to the physics of plasma diagnostics measurements. It develops from first principles the concepts needed to plan, execute and interpret plasma measurements, making it a suitable book for graduate students and professionals with little plasma physics background. The book will also be a valuable reference for seasoned plasma physicists, both experimental and theoretical, as well as those with an interest in space and astrophysical applications. This second edition is thoroughly revised and updated, with new sections and chapters covering recent developments in the field.
Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Download or read book Sputtering by Particle Bombardment written by Rainer Behrisch and published by Springer Science & Business Media. This book was released on 2007-07-26 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a long-needed survey of new results. Especially welcome is a new summary of the measured and calculated sputtering yields with an algebraic approximation formula for the energy and angular dependence of the yields, which is useful for researchers who need sputtering yields for physics research or applied problems. The book offers a critical review of computational methods for calculating sputtering yields and also includes molecular dynamics calculations.
Download or read book Progress in Fine Particle Plasmas written by Tetsu Mieno and published by BoD – Books on Demand. This book was released on 2020-08-26 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of plasma physics, plasmas (including charged fine particles) have been actively studied for more than 40 years, and special features of wave phenomena, self-organizations of the particles, potential formations, fluid-like motions of the particles, generations of fine particles in the plasmas, etc. have been investigated. Here, these plasmas are called “fine particle plasmas”, which are also called “dusty plasmas” and “complex plasmas”. This book intends to provide the reader with the recent progress of studies of fine particle plasmas from the viewpoints of wide and interdisciplinary directions, such as self-organized fine particles, Coulomb crystal formation, behaviors of fine particles, their stability, and syntheses of nano-sized particles in reactive plasmas. Further, the phenomena of dense grain particles and the effects of massive neutrinos in galaxy clustering are included.
Download or read book On the Edge of Magnetic Fusion Devices written by Sergei Krasheninnikov and published by Springer. This book was released on 2021-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current state of understanding concerning edge plasma, which bridges hot fusion plasma, with a temperature of roughly one million degrees Kelvin with plasma-facing materials, which have melting points of only a few thousand degrees Kelvin. In a fact, edge plasma is one of the keys to solution for harnessing fusion energy in magnetic fusion devices. The physics governing the processes at work in the edge plasma involves classical and anomalous transport of multispecies plasma, neutral gas dynamics, atomic physics effects, radiation transport, plasma-material interactions, and even the transport of plasma species within the plasma-facing materials. The book starts with simple physical models, then moves on to rigorous theoretical considerations and state-of-the-art simulation tools that are capable of capturing the most important features of the edge plasma phenomena. The authors compare the conclusions arising from the theoretical and computational analysis with the available experimental data. They also discuss the remaining gaps in their models and make projections for phenomena related to edge plasma in magnetic fusion reactors.
Download or read book Making Choices about Hydrogen written by Lynn Krieger Mytelka and published by IDRC. This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the mid-1990s, the emergence of a hydrogen economy and the speed with which it will arrive have been vigorously debated. As a disruptive technology, dominant designs for the production, storage and distribution of hydrogen have not yet been established. Neither have performance characteristics been achieved to compete with the existing combustion engine, though the efficiency and durability of hydrogen fuel cells are improving. This publication highlights the uncertainties involved in making choices about hydrogen and fuel cells in planning the development policies on national energy, environment and transport sector.--Publisher's description.
Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.
Download or read book Decanter Centrifuge Handbook written by A. Records and published by Elsevier. This book was released on 2001-03-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scope of Publication A reference work for process designers and users of decanters, this book aims to bridge the information gap in this field - that between academic theory promoted in student textbooks and case study data in manufacturers sales literature. Design It includes information on design and specification, preparing the reader to select and correctly size equipment. Purchase As a design or project engineer working with vendors to make final equipment selection, this work provides the readers with the full facts before they start talking to product vendors. Supply In an environment of industry consolidation, the handbook allows you to track suppliers old and new, providing a basis on which users can find the new relevant company for the parts/service he/she wishes to purchase. Operation Once an equipment purchase is made, the user needs to be made aware of how to optimally operate decanters. The Decanter Centrifuge Handbook covers relevant (process) operating issues such as instrumentation and control and the use of flocculents.
Download or read book Physics of Plasma Wall Interactions in Controlled Fusion written by D. E. Post and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlled thermonuclear fusion is one of the possible candidates for long term energy sources which will be indispensable for our highly technological society. However, the physics and technology of controlled fusion are extremely complex and still require a great deal of research and development before fusion can be a practical energy source. For producing energy via controlled fusion a deuterium-tritium gas has to be heated to temperatures of a few 100 Million °c corres ponding to about 10 keV. For net energy gain, this hot plasma has to be confined at a certain density for a certain time One pro mising scheme to confine such a plasma is the use of i~tense mag netic fields. However, the plasma diffuses out of the confining magnetic surfaces and impinges on the surrounding vessel walls which isolate the plasma from the surrounding air. Because of this plasma wall interaction, particles from the plasma are lost to the walls by implantation and are partially reemitted into the plasma. In addition, wall atoms are released and can enter the plasma. These wall atoms or impurities can deteriorate the plasma performance due to enhanced energy losses through radiation and an increase of the required magnetic pressure or a dilution of the fuel in the plasma. Finally, the impact of the plasma and energy on the wall can modify and deteriorate the thermal and mechanical pro perties of the vessel walls.
Download or read book Ion Beam Handbook for Material Analysis written by James W. Mayer and published by Elsevier. This book was released on 2012-12-02 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion Beam Handbook for Material Analysis emerged from the U.S.-Italy Seminar on Ion Beam Analysis of Near Surface Regions held at the Baia-Verde Hotel, Catania, June 17-20, 1974. The seminar was sponsored by the National Science Foundation and the Consiglio Nazionale delle Ricerche under the United States-Italy Cooperative Science Program. The book provides a useful collection of tables, graphs, and formulas for those involved in ion beam analysis. These tables, graphs, and formulas are divided into five chapters that cover the following topics: energy loss and energy straggling; backscattering spectrometry; channeling; applications of ion-induced nuclear reactions; and the use of ion-induced X-ray yields.
Download or read book Control of Machines written by S. K. Bhattacharya and published by New Age International. This book was released on 2006-12 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Machines is one of the most important functional areas for electrical and mechanical engineers working in industry. In this era of automation and control, every engineer has to acquaint himself on the design installation, and maintenance of control systems. This subject must find its place as a compulsory applied engineering subject in degree and diploma curriculum.Some progressive states and autonomous institutions have already introduced this subject in their curriculum. In this book, static control and programmable controllers have been included keeping in view the latest developments in modern industry. Relay and static control have been dealt with in details. Most of the control circuits included in this book have been taken from Indian industry. A chapter has been devoted to protection of motors and troubleshooting in control circuits.The chapter on PLC has been made very elaborate to deal with all aspects of logic controllers. Review questions have been included at the end of each chapter. The explanations of circuits and design procedure of control circuits have been made very simple to help students understand easily. Students, teachers and shop floor and design office engineers will find this book a very useful companion.
Download or read book Sugar Confectionery and Chocolate Manufacture written by R. Lees and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors had five objectives in preparing this book: (i) to bring together relevant information on many raw materials used in the manufacture of sweets and chocolate; (ii) to describe the principles involved and to relate them to production with maximum economy but maintaining high quality; (iii) to describe both traditional and modern production processes, in par ticular those continuous methods which are finding increasing application; (iv) to give basic recipes and methods, set out in a form for easy reference, for producing a large variety of sweets, and capable of easy modification to suit the raw materials and plant available; (v) to explain the elementary calculations most likely to be required. The various check lists and charts, showing the more likely faults and how to eliminate them, reflect the fact that art still plays no small part in this industry. To help users all over the world, whatever units they employ, most for mulations are given in parts by weight, but tables of conversion factors are provided at the end of the book. There also will be found a collection of other general reference data in tabular form; while the Glossary explains a number of technical terms, many of them peculiar to the industry.
Download or read book The Mechanism of the Electric Spark written by Leonard Benedict Loeb and published by . This book was released on 1941 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Plasma Boundary of Magnetic Fusion Devices written by P.C Stangeby and published by CRC Press. This book was released on 2000-01-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Plasma Boundary of Magnetic Fusion Devices introduces the physics of the plasma boundary region, including plasma-surface interactions, with an emphasis on those occurring in magnetically confined fusion plasmas. The book covers plasma-surface interaction, Debye sheaths, sputtering, scrape-off layers, plasma impurities, recycling and control, 1D and 2D fluid and kinetic modeling of particle transport, plasma properties at the edge, diverter and limiter physics, and control of the plasma boundary. Divided into three parts, the book begins with Part 1, an introduction to the plasma boundary. The derivations are heuristic and worked problems help crystallize physical intuition, which is emphasized throughout. Part 2 provides an introduction to methods of modeling the plasma edge region and for interpreting computer code results. Part 3 presents a collection of essays on currently active research hot topics. With an extensive bibliography and index, this book is an invaluable first port-of-call for researchers interested in plasma-surface interactions.
Download or read book Iter Physics written by C Wendell Horton, Jr and published by World Scientific. This book was released on 2015-06-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The promise of a vast and clean source of thermal power drove physics research for over fifty years and has finally come to collimation with the international consortium led by the European Union and Japan, with an agreement from seven countries to build a definitive test of fusion power in ITER. It happened because scientists since the Manhattan project have envisioned controlled nuclear fusion in obtaining energy with no carbon dioxide emissions and no toxic nuclear waste products.This large toroidal magnetic confinement ITER machine is described from confinement process to advanced physics of plasma-wall interactions, where pulses erupt from core plasma blistering the machine walls. Emissions from the walls reduce the core temperature which must remain ten times hotter than the 15 million degree core solar temperature to maintain ITER fusion power. The huge temperature gradient from core to wall that drives intense plasma turbulence is described in detail.Also explained are the methods designed to limit the growth of small magnetic islands, the growth of edge localized plasma plumes and the solid state physics limits of the stainless steel walls of the confinement vessel from the burning plasma. Designs of the wall coatings and the special 'exhaust pipe' for spent hot plasma are provided in two chapters. And the issues associated with high-energy neutrons — about 10 times higher than in fission reactions — and how they are managed in ITER, are detailed.
Download or read book Drilling Engineering Problems and Solutions written by M. E. Hossain and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely up to date and the most thorough and comprehensive reference work and learning tool available for drilling engineering, this groundbreaking volume is a must-have for anyone who works in drilling in the oil and gas sector. Petroleum and natural gas still remain the single biggest resource for energy on earth. Even as alternative and renewable sources are developed, petroleum and natural gas continue to be, by far, the most used and, if engineered properly, the most cost-effective and efficient, source of energy on the planet. Drilling engineering is one of the most important links in the energy chain, being, after all, the science of getting the resources out of the ground for processing. Without drilling engineering, there would be no gasoline, jet fuel, and the myriad of other "have to have" products that people use all over the world every day. Following up on their previous books, also available from Wiley-Scrivener, the authors, two of the most well-respected, prolific, and progressive drilling engineers in the industry, offer this groundbreaking volume. They cover the basic tenets of drilling engineering, the most common problems that the drilling engineer faces day to day, and cutting-edge new technology and processes through their unique lens. Written to reflect the new, changing world that we live in, this fascinating new volume offers a treasure of knowledge for the veteran engineer, new hire, or student. This book is an excellent resource for petroleum engineering students, reservoir engineers, supervisors & managers, researchers and environmental engineers for planning every aspect of rig operations in the most sustainable, environmentally responsible manner, using the most up-to-date technological advancements in equipment and processes.
