Download or read book High Value Manufacturing Advanced Research in Virtual and Rapid Prototyping written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2013-09-16 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Value Manufacturing is the result of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal, October 2013. It contains current contributions to the fi eld of virtual and rapid prototyping (V&RP) and is also focused on promoting better links between industry and academia. This volume comprises a collection of more than 110 reviewed papers which cover a wide range of topics, such as Additive and Nano Manufacturing Technologies, Biomanufacturing, Materials, Rapid Tooling and Manufacturing, CAD and 3D Data Acquisition Technologies, Simulation and Virtual Environments, and novel applications. High Value Manufacturing is intended for engineers, designers and manufacturers who are active in the fi elds of mechanical, industrial and biomedical engineering.

Download or read book Humanizing work and work Environment HWWE 2016 written by Dr Lakhwinder Pal Singh and published by GIAP Journals. This book was released on 2018-02-04 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of 14th International Conference on Humanizing work and work Environment

Download or read book Virtual and Rapid Manufacturing written by Ljubomir Tanchev and published by CRC Press. This book was released on 2007-09-17 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key

Download or read book Computer Control Abstracts written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials for the Restoration and Reconstruction of Dental Functions written by Jianxun Ding and published by Frontiers Media SA. This book was released on 2021-10-21 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Medical Modelling written by Richard Bibb and published by Woodhead Publishing. This book was released on 2014-12-13 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical modelling and the principles of medical imaging, Computer Aided Design (CAD) and Rapid Prototyping (also known as Additive Manufacturing and 3D Printing) are important techniques relating to various disciplines - from biomaterials engineering to surgery. Building on the success of the first edition, Medical Modelling: The application of Advanced Design and Rapid Prototyping techniques in medicine provides readers with a revised edition of the original text, along with key information on innovative imaging techniques, Rapid Prototyping technologies and case studies.Following an overview of medical imaging for Rapid Prototyping, the book goes on to discuss working with medical scan data and techniques for Rapid Prototyping. In this second edition there is an extensive section of peer-reviewed case studies, describing the practical applications of advanced design technologies in surgical, prosthetic, orthotic, dental and research applications. - Covers the steps towards rapid prototyping, from conception (modelling) to manufacture (manufacture) - Includes a comprehensive case studies section on the practical application of computer-aided design (CAD) and rapid prototyping (RP) - Provides an insight into medical imaging for rapid prototyping and working with medical scan data

Download or read book Kempe s Engineers Year book written by and published by . This book was released on 2000 with total page 2624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2007 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sun Tracking and Solar Renewable Energy Harvesting written by Gerro Prinsloo and published by Gerro Prinsloo. This book was released on 2015-11-02 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free to download eBook on Practical Solar Tracking Design, Solar Tracking, Sun Tracking, Sun Tracker, Solar Tracker, Follow Sun, Sun Position calculation (Azimuth, Elevation, Zenith), Sun following, Sunrise, Sunset, Moon-phase, Moonrise, Moonset calculators. In harnessing power from the sun through a solar tracker or solar tracking system, renewable energy system developers require automatic solar tracking software and solar position algorithms. On-axis sun tracking system such as the altitude-azimuth dual axis or multi-axis solar tracker systems use a sun tracking algorithm or ray tracing sensors or software to ensure the sun's passage through the sky is traced with high precision in automated solar tracker applications, right through summer solstice, solar equinox and winter solstice. Eco Friendly and Environmentally Sustainable Micro Combined Solar Heat and Power (m-CHP, m-CCHP, m-CHCP) with Microgrid Storage and Layered Smartgrid Control towards Supplying Off-Grid Rural Villages in developing BRICS countries such as Africa, India, China and Brazil. Off-grid rural villages and isolated islands areas require mCHP and trigeneration solar power plants and associated isolated smart microgrid solutions to serve the community energy needs. This article describes the development progress for such a system, also referred to as solar polygeneration. The system includes a sun tracker mechanism wherin a parabolic dish or lenses are guided by a light sensitive mechanique in a way that the solar receiver is always at right angle to the solar radiation. Solar thermal energy is then either converted into electrical energy through a free piston Stirling, or stored in a thermal storage container. The project includes the thermodynamic modeling of the plant in Matlab Simulink as well as the development of an intelligent control approach that includes smart microgrid distribution and optimization. The book includes aspects in the simulation and optimization of stand-alone hybrid renewable energy systems and co-generation in isolated or islanded microgrids. It focusses on the stepwise development of a hybrid solar driven micro combined cooling heating and power (mCCHP) compact trigeneration polygeneration and thermal energy storage (TES) system with intelligent weather prediction, weak-ahead scheduling (time horizon), and look-ahead dispatch on integrated smart microgrid distribution principles. The solar harvesting and solar thermodynamic system includes an automatic sun tracking platform based on a PLC controlled mechatronic sun tracking system that follows the sun progressing across the sky. An intelligent energy management and adaptive learning control optimization approach is proposed for autonomous off-grid remote power applications, both for thermodynamic optimization and smart micro-grid optimization for distributed energy resources (DER). The correct resolution of this load-following multi objective optimization problem is a complex task because of the high number and multi-dimensional variables, the cross-correlation and interdependency between the energy streams as well as the non-linearity in the performance of some of the system components. Exergy-based control approaches for smartgrid topologies are considered in terms of the intelligence behind the safe and reliable operation of a microgrid in an automated system that can manage energy flow in electrical as well as thermal energy systems. The standalone micro-grid solution would be suitable for a rural village, intelligent building, district energy system, campus power, shopping mall centre, isolated network, eco estate or remote island application setting where self-generation and decentralized energy system concepts play a role. Discrete digital simulation models for the thermodynamic and active demand side management systems with digital smartgrid control unit to optimize the system energy management is currently under development. Parametric simulation models for this trigeneration system (polygeneration, poligeneration, quadgeneration) are developed on the Matlab Simulink and TrnSys platforms. In terms of model predictive coding strategies, the automation controller will perform multi-objective cost optimization for energy management on a microgrid level by managing the generation and storage of electrical, heat and cooling energies in layers. Each layer has its own set of smart microgrid priorities associated with user demand side cycle predictions. Mixed Integer Linear Programming and Neural network algorithms are being modeled to perform Multi Objective Control optimization as potential optimization and adaptive learning techniques.

Download or read book Close Range Photogrammetry written by Thomas Luhmann and published by Wiley. This book was released on 2007-01-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to close range photogrammetry. The first comprehensive modern text on this subject in English, expanded and updated from the German text by Luhmann. This book provides a thorough presentation of the methods, mathematics, systems and applications which comprise the subject of close range photogrammetry, which uses accurate imaging techniques to analyse the three-dimensional shape of a wide range of manufactured and natural objects. Close range photogrammetry, for the most part entirely digital, has become an accepted, powerful and readily available technique for engineers and scientists who wish to utilise images to make accurate 3-D measurements of complex objects. After an introduction, the book provides fundamental mathematics, including orientation, digital imaging processing and 3-D reconstruction methods, as well as presenting a discussion of imaging technology including targeting and illumination, hardware and software systems. Finally it gives a short overview of photogrammetric solutions for typical applications in engineering, manufacturing, medical science, architecture, archaeology and other fields.

Download or read book Reverse Engineering written by Vinesh Raja and published by Springer Science & Business Media. This book was released on 2007-10-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited collection of essays from world-leading academic and industrial authors yields insight into all aspects of reverse engineering. Methods of reverse engineering analysis are covered, along with special emphasis on the investigation of surface and internal structures. Frequently-used hardware and software are assessed and advice given on the most suitable choice of system. Also covered is rapid prototyping and its relationship with successful reverse engineering.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapid Prototyping written by Rafiq Noorani and published by John Wiley & Sons. This book was released on 2006 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is a faster, more cost-effective method for building prototypes from three-dimensional computer-aided design (CAD) drawings. Rapid Prototyping provides a fundamental overview of the general manufacturing process and presents the principles and applications of designing and fabricating parts in a format that makes learning easy. This user-friendly text features basic information on layered manufacturing processes, the essential vocabulary of nomenclature, numerous review exercises, case studies, a full section of rapid prototyping applications, helpful material for further study, applications to real-world problems, and more.

Download or read book CAD CAM Abstracts written by and published by . This book was released on 1992 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapid Prototyping written by Patri K. Venuvinod and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the dawn of civilization, mankind has been engaged in the conception and manufacture of discrete products to serve the functional needs of local customers and the tools (technology) needed by other craftsmen. In fact, much of the progress in civilization can be attributed to progress in discrete product manufacture. The functionality of a discrete object depends on two entities: form, and material composition. For instance, the aesthetic appearance of a sculpture depends upon its form whereas its durability depends upon the material composition. An ideal manufacturing process is one that is able to automatically generate any form (freeform) in any material. However, unfortunately, most traditional manufacturing processes are severely constrained on all these counts. There are three basic ways of creating form: conservative, subtractive, and additive. In the first approach, we take a material and apply the needed forces to deform it to the required shape, without either adding or removing material, i. e. , we conserve material. Many industrial processes such as forging, casting, sheet metal forming and extrusion emulate this approach. A problem with many of these approaches is that they focus on form generation without explicitly providing any means for controlling material composition. In fact, even form is not created directly. They merely duplicate the external form embedded in external tooling such as dies and molds and the internal form embedded in cores, etc. Till recently, we have had to resort to the 'subtractive' approach to create the form of the tooling.