EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book A Critical Review of the Intrinsic Nature of Vortex Induced Vibrations

Download or read book A Critical Review of the Intrinsic Nature of Vortex Induced Vibrations written by Turgut Sarpkaya and published by . This book was released on 2003 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise and comprehensive review of the progress made during the past two decades on vortex induced vibration (VIV) of mostly circular cylindrical structures subjected to steady uniform flow. The critical elements of the evolution of the ideas, theoretical insights, experimental methods, and numerical models are traced systematically; the strengths and weaknesses of the current state of the understanding of the complex fluid/structure interaction are discussed in some detail. Finally, some suggestions are made for further research on VIV. The organization of the paper is given at the end of the next section.

Book Fluid Structure Interactions

Download or read book Fluid Structure Interactions written by Michael P. Païdoussis and published by Cambridge University Press. This book was released on 2014-01-02 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures in contact with fluid flow, whether natural or man-made, are inevitably subject to flow-induced forces and flow-induced vibration: from plant leaves to traffic signs and to more substantial structures, such as bridge decks and heat exchanger tubes. Under certain conditions the vibration may be self-excited, and it is usually referred to as an instability. These instabilities and, more specifically, the conditions under which they arise are of great importance to designers and operators of the systems concerned because of the significant potential to cause damage in the short term. Such flow-induced instabilities are the subject of this book. In particular, the flow-induced instabilities treated in this book are associated with cross-flow, that is, flow normal to the long axis of the structure. The book treats a specific set of problems that are fundamentally and technologically important: galloping, vortex-shedding oscillations under lock-in conditions, and rain-and-wind-induced vibrations, among others. The emphasis throughout is on providing a physical description of the phenomena that is as clear and up-to-date as possible.

Book Analysis of Turbulent Flows with Computer Programs

Download or read book Analysis of Turbulent Flows with Computer Programs written by Tuncer Cebeci and published by Elsevier. This book was released on 2004 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Computation of Turbulent Flows has been written by one of the most prolific authors in the field of CFD. Professor of aerodynamics at SUPAERO and director of DMAE at ONERA, the author calls on both his academic and industrial experience when presenting this work. The field of CFD is strongly represented by the following corporate companies; Boeing; Airbus; Thales; United Technologies and General Electric, government bodies and academic institutions also have a strong interest in this exciting field. Each chapter has also been specifically constructed to constitute as an advanced textbook for PhD candidates working in the field of CFD, making this book essential reading for researchers, practitioners in industry and MSc and MEng students. * A broad overview of the development and application of Computational Fluid Dynamics (CFD), with real applications to industry * A Free CD-Rom which contains computer program's suitable for solving non-linear equations which arise in modeling turbulent flows * Professor Cebeci has published over 200 technical papers and 14 books, a world authority in the field of CFD

Book Energy Harvesting from Flow Induced Vibration

Download or read book Energy Harvesting from Flow Induced Vibration written by DANIIL. WANG YURCHENKO (JUNLEI. ABDELKEFI, ABDESSATTAR.) and published by VCH. This book was released on 2022-07-13 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Trichier

    Book Details:
  • Author : Alessandra Ceretto
  • Publisher : Lulu.com
  • Release :
  • ISBN : 136509796X
  • Pages : 192 pages

Download or read book Trichier written by Alessandra Ceretto and published by Lulu.com. This book was released on with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Introduction to the Theory of Flow Machines

Download or read book Introduction to the Theory of Flow Machines written by Albert Betz and published by Elsevier. This book was released on 2014-05-16 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Theory of Flow Machines details the fundamental processes and the relations that have a significant influence in the operating mechanism of flow machines. The book first covers the general consideration in flow machines, such as pressure, stress, and cavitation. In the second chapter, the text deals with ducts; this chapter discusses the general remarks, types of flow, and mixing process. Next, the book tackles the types of cascades, along with its concerns. The closing chapter covers the flow machine and its components, such as turbine, wheels, engines, and propellers. The text will be of great use to mechanical engineers and technicians.

Book Micro Doppler Characteristics of Radar Targets

Download or read book Micro Doppler Characteristics of Radar Targets written by Qun Zhang and published by Elsevier. This book was released on 2016-10-31 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Doppler Characteristics of Radar Targets is a monograph on radar target's micro-Doppler effect theory and micro-Doppler feature extraction techniques. The micro-Doppler effect is presented from two aspects, including micro-Doppler effect analysis and micro-Doppler feature extraction, with micro-Doppler effects induced by different micro-motional targets in different radar systems analyzed and several methods of micro-Doppler feature extraction and three-dimensional micro-motion feature reconstruction presented. The main contents of this book include micro-Doppler effect in narrowband radar, micro-Doppler effect in wideband radar, micro-Doppler effect in bistatic radar, micro-Doppler feature analysis and extraction, and three-dimensional micro-motion feature reconstruction, etc. This book can be used as a reference for scientific and technical personnel engaged in radar signal processing and automatic target recognition, etc. It is especially suitable for beginners who are interested in research on micro-Doppler effect in radar. - Presents new views on micro-Doppler effects, analyzing and discussing micro-Doppler effect in wideband radar rather than focusing on narrowband - Provides several new methods for micro-Doppler feature extraction which are very helpful and practical for readers - Includes practical cases that align with main MATLAB codes in each chapter, with detailed program annotations

Book Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery

Download or read book Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery written by Yaguo Lei and published by Butterworth-Heinemann. This book was released on 2016-11-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery provides a comprehensive introduction of intelligent fault diagnosis and RUL prediction based on the current achievements of the author's research group. The main contents include multi-domain signal processing and feature extraction, intelligent diagnosis models, clustering algorithms, hybrid intelligent diagnosis strategies, and RUL prediction approaches, etc. This book presents fundamental theories and advanced methods of identifying the occurrence, locations, and degrees of faults, and also includes information on how to predict the RUL of rotating machinery. Besides experimental demonstrations, many application cases are presented and illustrated to test the methods mentioned in the book. This valuable reference provides an essential guide on machinery fault diagnosis that helps readers understand basic concepts and fundamental theories. Academic researchers with mechanical engineering or computer science backgrounds, and engineers or practitioners who are in charge of machine safety, operation, and maintenance will find this book very useful. - Provides a detailed background and roadmap of intelligent diagnosis and RUL prediction of rotating machinery, involving fault mechanisms, vibration characteristics, health indicators, and diagnosis and prognostics - Presents basic theories, advanced methods, and the latest contributions in the field of intelligent fault diagnosis and RUL prediction - Includes numerous application cases, and the methods, algorithms, and models introduced in the book are demonstrated by industrial experiences

Book 11th International Conference on Turbochargers and Turbocharging

Download or read book 11th International Conference on Turbochargers and Turbocharging written by IMechE and published by Elsevier. This book was released on 2014-08-25 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future market forces and environmental considerations in the passenger car and commercial vehicle sector mean more stringent engine downsizing is far more prevalent. Therefore, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness. The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the land and marine transport industries. The internal combustion engine is the key product and downsizing, efficiency and economy are the driving forces for development for both spark ignition (SI) and compression ignition (CI) engines in both markets. Future market forces and environmental considerations for transportation, specifically in the passenger car, commercial vehicle and the marine sectors mean more stringent engine downsizing. This international conference is the latest in the highly successful and prestigious series held regularly since 1978. These proceedings from the Institution's highly successful and prestigious series address current and novel aspects of turbocharging systems design, boosting solutions for engine downsizing and improvements in efficiency, and present the latest research and development in this growing and innovative area. - Focuses on boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems - Explores the current need for high efficiency, reliability, durability and compactness in recovery systems - Examines what new systems developments are underway

Book Ganny Knits a Spaceship

    Book Details:
  • Author : David Gerrold
  • Publisher : Eric Flint's Ring of Fire Press
  • Release : 2018-04-15
  • ISBN : 9781948818339
  • Pages : 118 pages

Download or read book Ganny Knits a Spaceship written by David Gerrold and published by Eric Flint's Ring of Fire Press. This book was released on 2018-04-15 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starling and her grandmother operate a way station in the asteroid belt. For decades, Ganny has had a very successful business, using her way station to sling cargo and passenger ships all over the asteroid belt and to most of the planets as well. But now, technological advances and corporate greed are threatening her livelihood and the continued well-being of her granddaughter. What's an old lady to do? Digging back into her past, Ganny applies an ancient technique to modern materials. She begins to create a spaceship that will enable her and Starling to survive-and even to prosper. How? By knitting it.All is going well. But once the corporate interests that were plotting to seize her way station realize what she's up to, they set out to stop her by any means fair or foul.Mostly foul. Her crew is suborned, murder attempts are launched, financial plots are set underway. What's an old lady to do?Apply a long lifetime's sagacity and resourcefulness, that's what. Guided always by her knowledge that revenge is a dish best served old.Written by the Hugo and Nebula award winning author of "The Trouble With Tribbles," The War Against the Chtorr series, "The Man Who Folded Himself," and "The Martian Child."

Book Fire Fighting Pumping Systems at Industrial Facilities

Download or read book Fire Fighting Pumping Systems at Industrial Facilities written by Dennis P. Nolan and published by William Andrew. This book was released on 2011-06-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from the perspective of industrial users, this is the only book that describes how to install an effective firewater pumping system in a pragmatic and budget-conscious way rather than with purely the regulatory framework in mind. Based on the wide-ranging industrial experience of the author, this book is also the only one that deals with the particular risks and requirements of off-shore facilities. This book takes the reader beyond the prescriptive requirements of the fire code (NFPA, UL) and considers how to make the best choice of design for the budget available as well as how to ensure the other components of the pumping system and supporting services are optimized. - The only alternative to guides written by regulatory enforcement bodies, this book is uniquely practical and objective – demonstrating how and why the standards need to be met - Covers a wide range of industries, including those with exceptional requirements such as off-shore petroleum facilities and chemical plants - Written by someone who has been responsible for the safety of large numbers of workers and billions of dollars worth of equipment, for those in similarly responsible positions

Book Science and Engineering of Hydrogen Based Energy Technologies

Download or read book Science and Engineering of Hydrogen Based Energy Technologies written by Paulo Emilio Miranda and published by Academic Press. This book was released on 2018-11-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Hydrogen-Based Energy Technologies explores the generation of energy using hydrogen and hydrogen-rich fuels in fuel cells from the perspective of its integration into renewable energy systems using the most sound and current scientific knowledge. The book first examines the evolution of energy utilization and the role expected to be played by hydrogen energy technologies in the world's energy mix, not just for energy generation, but also for carbon capture, storage and utilization. It provides a general overview of the most common and promising types of fuel cells, such as PEMFCs, SOFCs and direct alcohol fuel cells. The co-production of chemical and electrolysis cells, as well as the available and future materials for fuel cells production are discussed. It then delves into the production of hydrogen from biomass, including waste materials, and from excess electricity produced by other renewable energy sources, such as solar, wind, hydro and geothermal. The main technological approaches to hydrogen storage are presented, along with several possible hydrogen energy engineering applications. Science and Engineering of Hydrogen-Based Energy Technologies's unique approach to hydrogen energy systems makes it useful for energy engineering researchers, professionals and graduate students in this field. Policy makers, energy planning and management professionals, and energy analysts can also benefit from the comprehensive overview that it provides. - Presents engineering fundamentals, commercially deployed technologies, up-and-coming developments and applications through a systemic approach - Explores the integration of hydrogen technologies in renewable energy systems, including solar, wind, bioenergy and ocean energy - Covers engineering standards, guidelines and regulations, as well as policy and social aspects for large-scale deployment of these technologies

Book Integration of Distributed Energy Resources in Power Systems

Download or read book Integration of Distributed Energy Resources in Power Systems written by Toshihisa Funabashi and published by Academic Press. This book was released on 2016-03-23 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integration of Distributed Energy Resources in Power Systems: Implementation, Operation and Control covers the operation of power transmission and distribution systems and their growing difficulty as the share of renewable energy sources in the world's energy mix grows and the proliferation trend of small scale power generation becomes a reality. The book gives students at the graduate level, as well as researchers and power engineering professionals, an understanding of the key issues necessary for the development of such strategies. It explores the most relevant topics, with a special focus on transmission and distribution areas. Subjects such as voltage control, AC and DC microgrids, and power electronics are explored in detail for all sources, while not neglecting the specific challenges posed by the most used variable renewable energy sources. - Presents the most relevant aspects of the integration of distributed energy into power systems, with special focus on the challenges for transmission and distribution - Explores the state-of the-art in applications of the most current technology, giving readers a clear roadmap - Deals with the technical and economic features of distributed energy resources and discusses their business models

Book The Function Mf e

Download or read book The Function Mf e written by Cornelius Evers and published by . This book was released on 1926 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Gallagher s Glacier

    Book Details:
  • Author : Walt Richmond
  • Publisher :
  • Release : 2019-10-22
  • ISBN : 9781479445974
  • Pages : 174 pages

Download or read book Gallagher s Glacier written by Walt Richmond and published by . This book was released on 2019-10-22 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the cold corrupt system of the colony mining worlds, one man's life and liberty aren't worth much; the vital spacelanes are rigidly controlled, and it's as much as your life is worth to go against the system. But there is one man with both the unbroken spirit and the technological mastery to open the lanes and free his fellow men from tyranny. And on grim Stellamira, N.N. Gallagher builds the first resistance. His materials: downtrodden colonists with nothing left to lose, and worlds to gain; a clever, rebellious young madame and her "entourage;" a native starship captain with a lot to learn, and a battlefield to learn it on; and a great ice-asteroid that engineering genius has transformed into a ship called GALLAGHER'S GLACIER.

Book Tom Swift and His Rocket Ship

Download or read book Tom Swift and His Rocket Ship written by Victor Appleton (II.) and published by . This book was released on 1954 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tom Swift, Jr., and his friend, Bud Barclay, enter an international space race hoping to orbit the earth in two hours.

Book Space Doctor

    Book Details:
  • Author : Lee Correy
  • Publisher : Ballantine Books
  • Release : 1985-05-01
  • ISBN : 9780345324863
  • Pages : 256 pages

Download or read book Space Doctor written by Lee Correy and published by Ballantine Books. This book was released on 1985-05-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: