Download or read book Solidification of Aluminum Alloys written by Men G. Chu and published by Wiley-TMS. This book was released on 2004-03 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses progress in the application of solidificationprinciples to the production of aluminum alloys. Topics includemicrostructure evolution, phase formation and solidification pathanalysis, grain refinement, micro/macro-segregation, mechanicalbehavior/properties in the mushy state, solidificationcracking/tearing, gas/shrinkage porosity formation, effect ofimpurities/trace elements, and the impact of cast structure on thesubsequent fabrication and properties of finished products. Paperson the experimental or theoretical simulation of solidificationaspects of casting processes including direct chill casting,continuous casting, shaped casting, semi-solid processing, andother advanced casting technologies are also included, as well asexamples showing the use of solidification principles to solveindustrial problems. From ahref="http://www.tms.org/Meetings/Annual-04/AnnMtg04Home.html"target="_blank"2004 TMS Annual Meeting/a to be held inCharlotte, North Carolina, March 14 - 18, 2004.
Download or read book Solidification written by Michel Rappaz and published by EPFL Press. This book was released on 2009-08-21 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification is one of the oldest processes for producing useful implements and remains one of the most important modern commercial processes. This text describes the fundamentals of the technology in a coherent way, using consistent notation.
Download or read book Science and Engineering of Casting Solidification written by Doru Michael Stefanescu and published by Springer. This book was released on 2016-10-22 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this popular textbook covers current topics in all areas of casting solidification. Partial differential equations and numerical analysis are used extensively throughout the text, with numerous calculation examples, to help the reader in achieving a working knowledge of computational solidification modeling. The features of this new edition include: • new chapters on semi-solid and metal matrix composites solidification • a significantly extended treatment of multiscale modeling of solidification and its applications to commercial alloys • a survey of new topics such as solidification of multicomponent alloys and molecular dynamic modeling • new theories, including a theory on oxide bi-films in the treatment of shrinkage problems • an in-depth treatment of the theoretical aspects of the solidification of the most important commercial alloys including steel, cast iron, aluminum-silicon eutectics, and superalloys • updated tables of material constants.
Download or read book Advances in the Science and Engineering of Casting Solidification written by Laurentiu Nastac and published by Springer. This book was released on 2016-12-16 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection encompasses the following four areas: (1) Solidification processing: theoretical and experimental investigations of solidification processes including castings solidification, directional solidification of alloys, electromagnetic stirring, ultrasonic cavitation, mechanical vibration, active cooling and heating, powder bed-electron beam melting additive manufacturing, etc. for processing of metals, polymers and composite materials; (2) Microstructure Evolution: theoretical and experimental studies related to microstructure evolution of materials including prediction of solidification-related defects and particle pushing/engulfment aspects; (3) Novel Casting and Molding Processes: modeling and experimental aspects including high pressure die casting, permanent casting, centrifugal casting, low pressure casting, 3D silica sand mold printing, etc.; and (4) Cast Iron: all aspects related to cast iron characterization, computational and analytical modeling, and processing.
Download or read book Proceedings of the International Conference on Metallurgical Engineering and Centenary Celebration written by Sudipta Patra and published by Springer Nature. This book was released on 2023-10-14 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer reviewed articles from The International Conference on Metallurgical Engineering and Centenary Celebration (METCENT 2023), held at Indian Institute of Technology (BHU) Varanasi, India from the 26-28th of October 2023. It covers wide areas of metallurgical and materials science, highlighting recent advancements in these areas, including but not limited to Advanced Steels, Computational Material Science, Recent Ferrous/Non-Ferrous Metallurgy Processes, Green Iron and Steel Making Technologies and others. METCENT 2023 provides a unique opportunity to all the Metallurgists, Materials Scientists, Academicians and Industry experts to share their experiences on this special occasion.
Download or read book Foundry Processes written by Seymour Katz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a number of years it has been a General Motors Research Laboratories custom to hold a symposium on a subject which is new and emerging, and to invite the best people in the world in that subject to come together to talk to each other. Initially, I had some difficulty in regarding foundry processes as a new and emerging subject. Copper alloys have been in foundry practice for about six thousand years. Foundrymen working with those alloys have been recognized, as such, for nearly all that time. Iron has a much shorter history, probably only three or four thousand years. So what's new? What is new is that a subject which has always been so complex and so difficult that it could only be a craft skill, with bits and pieces of knowledge and bits and pieces of insight, has begun to yield to new abilities to solve very complex problems. We do this now because we can handle great amounts of data by computational means, using new and more complicated theoretical treatments than we could deal with before. In fact, we have a new technology with which we can attack these terribly difficult problems. Thus, foundry processing is becoming a new subject because new things can be done with it.
Download or read book Physical and Numerical Simulation of Material Processing VI written by Ji Tai Niu and published by Trans Tech Publications Ltd. This book was released on 2011-12-06 with total page 1568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 6th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 2010), November 16-19, 2010, Guilin, China
Download or read book Casting Processes and Modelling of Metallic Materials written by Zak Abdallah and published by BoD – Books on Demand. This book was released on 2021-02-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.
Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)
Download or read book Design and Modeling of Mechanical Systems II written by Mnaouar Chouchane and published by Springer. This book was released on 2015-03-24 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 6th International Congress on Design and Modeling of Mechanical Systems (CMSM’2015), held in Hammamet, Tunisia, from the 23rd to the 25th of March 2015. It reports on both recent research findings and innovative industrial applications in the fields of mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, and design and manufacturing of mechanical systems. Since its first edition in 2005, the CMSM Congress has been held every two years with the aim of bringing together specialists from universities and industry to present the state-of-the-art in research and applications, discuss the most recent findings and exchange and develop expertise in the field of design and modeling of mechanical systems. The CMSM Congress is jointly organized by three Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir; the Mechanical Laboratory of Sousse, part of the National Engineering School of Sousse; and the Mechanical, Modeling and Manufacturing Laboratory at the National Engineering School of Sfax.
Download or read book Handbook of Thermal Process Modeling Steels written by Cemil Hakan Gur and published by CRC Press. This book was released on 2008-12-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work
Download or read book Simulation of Aluminum Shape Casting Processing written by Qigui Wang and published by Wiley-TMS. This book was released on 2006-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the latest developments and applications of modeling and simulation techniques in aluminum shape castings, and the need for improvement of these computational techniques. Specifically, topics include design of both the cast aluminum alloy as well as aluminum casting and gating system; modeling, simulation and optimization of both the casting process and heat treatment; modeling and simulation of both casting defect and microstructure; prediction of mechanical performance and influence of subsequent processing on final performance. Developers and users of computational techniques applied to aluminum shape castings as well as end users of castings will find this book extremely helpful.
Download or read book Modeling for Casting and Solidification Processing written by Kuang-Oscar Yu and published by CRC Press. This book was released on 2001-10-16 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text seeks to provide a comprehensive technical foundation and practical examples for casting process modelling technology. It highlights fundamental theory for solidification and useful applications for industrial production. It also details shape and ingot castings, semi-solid metalworking, and spray forming.
Download or read book Continuous Casting written by Michael Vynnycky and published by MDPI. This book was released on 2019-07-30 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous casting is an industrial process whereby molten metal is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in finishing mills; it is the most frequently used process to cast not only steel, but also aluminium and copper alloys. Since its widespread introduction for steel in the 1950s, it has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardized production of a product, as well as providing increased control over the process through automation. Nevertheless, challenges remain and new ones appear, as ways are sought to minimize casting defects and to cast alloys that could originally only be cast via other means. This Special Issue of the journal "Metals" consists of 14 research articles that cover many aspects of experimental work and theoretical modelling related to the ongoing development of continuous casting processes.
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling the Flow and Solidification of Metals written by T.J. Smith and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origin of this book can be traced to a Workshop held at the University of Cambridge in December 1985 under the auspices of the Wolfson Group for Studies of Fluid Flow and Mixing in Industrial Processes. This Group was es tablished at the University of Cambridge in January 1983 and includes mem bers from the Departments of Applied Mathematics and Theoretical Physics, Engineering and Chemical Engineering. As its name suggests, the objective of the Group is to undertake, co"ordinate and stimulate research in various aspects of fluid flow and mixing in industrial processes. However, another equally important aim for the Group is to promote co-operation between the University and industry at all levels from collaborative research projects to joint colloquia. The Workshop in December 1985 on 'Mixing, Stirring and Solidification in Metallurgical Processes' which led to this book was one in an annual series of such meetings first held in December 1983. The existence of the Wolfson Group is due to the enthusiasm of its original advocate, the late Professor J. A. Shercliff FRS, Head of the Department of Engineering who, together with Professor G. K. Batchelor FRS, Professor J. F. Davidson FRS, Dr J. C. R. Hunt, and Dr R. E. Britter, were responsible for the initial application to the Wolfson Foundation and for the subsequent direction of the Group's activities.
