Download or read book Natural Convection of Air in a Square Cavity written by Graham De Vahl Davis and published by . This book was released on 1982 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanofluid Flow in Porous Media written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of fluid flow and heat transfer in a porous medium have been the subject of continuous interest for the past several decades because of the wide range of applications, such as geothermal systems, drying technologies, production of thermal isolators, control of pollutant spread in groundwater, insulation of buildings, solar power collectors, design of nuclear reactors, and compact heat exchangers, etc. There are several models for simulating porous media such as the Darcy model, Non-Darcy model, and non-equilibrium model. In porous media applications, such as the environmental impact of buried nuclear heat-generating waste, chemical reactors, thermal energy transport/storage systems, the cooling of electronic devices, etc., a temperature discrepancy between the solid matrix and the saturating fluid has been observed and recognized.

Download or read book Natural Convection in a Square Cavity written by Graham De Vahl Davis and published by . This book was released on 1982 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Single Phase Convective Heat Transfer written by Sadik Kakaç and published by Wiley-Interscience. This book was released on 1987-11-03 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.

Download or read book Heat and Mass Transfer in Packed Beds written by Noriaki Wakao and published by Taylor & Francis. This book was released on 1982 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1982. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book Convective Heat Transfer in Porous Media written by Yasser Mahmoudi and published by CRC Press. This book was released on 2019-11-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on heat transfer in porous media, this book covers recent advances in nano and macro’ scales. Apart from introducing heat flux bifurcation and splitting within porous media, it highlights two-phase flow, nanofluids, wicking, and convection in bi-disperse porous media. New methods in modeling heat and transport in porous media, such as pore-scale analysis and Lattice–Boltzmann methods, are introduced. The book covers related engineering applications, such as enhanced geothermal systems, porous burners, solar systems, transpiration cooling in aerospace, heat transfer enhancement and electronic cooling, drying and soil evaporation, foam heat exchangers, and polymer-electrolyte fuel cells.

Download or read book Direct and Large Eddy Simulation IX written by Jochen Fröhlich and published by Springer. This book was released on 2015-01-27 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reflects the state of the art of numerical simulation of transitional and turbulent flows and provides an active forum for discussion of recent developments in simulation techniques and understanding of flow physics. Following the tradition of earlier DLES workshops, these papers address numerous theoretical and physical aspects of transitional and turbulent flows. At an applied level it contributes to the solution of problems related to energy production, transportation, magneto-hydrodynamics and the environment. A special session is devoted to quality issues of LES. The ninth Workshop on 'Direct and Large-Eddy Simulation' (DLES-9) was held in Dresden, April 3-5, 2013, organized by the Institute of Fluid Mechanics at Technische Universität Dresden. This book is of interest to scientists and engineers, both at an early level in their career and at more senior levels.

Download or read book Theoretical Computational and Experimental Solutions to Thermo Fluid Systems written by Muthukumar Palanisamy and published by Springer Nature. This book was released on 2021-03-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Innovations in Thermo-Fluid Engineering and Sciences (ICITFES 2020). It covers topics in theoretical and experimental fluid dynamics, numerical methods in heat transfer and fluid mechanics, different modes of heat transfer, multiphase flow, fluid machinery, fluid power, refrigeration and air conditioning, and cryogenics. The book will be helpful to the researchers, scientists, and professionals working in the field of fluid mechanics and machinery, and thermal engineering.

Download or read book Fluid Mechanics and Fluid Power Contemporary Research written by Arun K. Saha and published by Springer. This book was released on 2016-09-20 with total page 1638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the 42nd National and 5th International Conference on Fluid Mechanics and Fluid Power held at IIT Kanpur in December, 2014.The conference proceedings encapsulate the best deliberations held during the conference. The diversity of participation in the conference, from academia, industry and research laboratories reflects in the articles appearing in the volume. This contributed volume has articles from authors who have participated in the conference on thematic areas such as Fundamental Issues and Perspectives in Fluid Mechanics; Measurement Techniques and Instrumentation; Computational Fluid Dynamics; Instability, Transition and Turbulence; Turbomachinery; Multiphase Flows; Fluid‐Structure Interaction and Flow‐Induced Noise; Microfluidics; Bio‐inspired Fluid Mechanics; Internal Combustion Engines and Gas Turbines; and Specialized Topics. The contents of this volume will prove useful to researchers from industry and academia alike.

Download or read book Convective Flow and Heat Transfer from Wavy Surfaces written by Aroon Shenoy and published by CRC Press. This book was released on 2016-10-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convective Flow and Heat Transfer from Wavy Surfaces: Viscous Fluids, Porous Media, and Nanofluids addresses the wavy irregular surfaces in heat transfer devices. Fluid flow and heat transfer studies from wavy surfaces have received attention, since they add complexity and require special mathematical techniques. This book considers the flow and heat transfer characteristics from wavy surfaces, providing an understanding of convective behavioral changes.

Download or read book Pattern Formation and Stability in Magnetic Colloids written by Nicolás O. Rojas and published by BoD – Books on Demand. This book was released on 2020-01-08 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of works on pattern formation and stability of magnetic colloids. Magnetic liquids can be investigated in different scenarios. Geometry (quasi 1, 2 and 3 dimensional vessels ), scales (molecules, macroscopic particles) and the type of suspension (e.g., ferromagnetic, superparamagnetic) employed in experiments completely modify the aggregation process. The observed patterns in the fluid range from surface waves to bulk chains and bundles. The approaches presented in this book use standard statistical means such as the Gibbs free energy and chemical potential. Numerical works are implemented employing methods such as Monte Carlo or Langevin dynamics simulations. Kinetic theory is used in theoretical approaches being successfully applied to algorithms such as the Lattice-Boltzmann method.

Download or read book Shallow Flows written by Gerhard H. Jirka and published by CRC Press. This book was released on 2004-09-15 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the key findings of the International Symposium held in Delft in 2003, which explored the process of shallow flows. Shallow flows are found in lowland rivers, lakes, estuaries, bays, coastal areas and in density-stratified atmospheres, and may be observed in puddles, as in oceans. They impact on the life and work of a w

Download or read book Investigations on the Theory of the Brownian Movement written by Albert Einstein and published by Courier Corporation. This book was released on 1956-01-01 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Five early papers evolve theory that won Einstein a Nobel Prize: "Movement of Small Particles Suspended in a Stationary Liquid Demanded by the Molecular-Kinetic Theory of Heat"; "On the Theory of the Brownian Movement"; "A New Determination of Molecular Dimensions"; "Theoretical Observations on the Brownian Motion"; and "Elementary Theory of the Brownian Motion."

Download or read book Moving Particle Semi implicit Method written by Seiichi Koshizuka and published by Academic Press. This book was released on 2018-06-01 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moving Particle Semi-implicit Method: A Meshfree Particle Method for Fluid Dynamics begins by familiarizing the reader with basic theory that supports their journey through sections on advanced MPH methods. The unique insights that this method provides include fluid-structure interaction, non-Newtonian flow, and cavitation, making it relevant to a wide range of applications in the mechanical, structural, and nuclear industries, and in bioengineering. Co-authored by the originator of the MPS method, this book is the most authoritative guide available. It will be of great value to students, academics and researchers in industry. - Presents the differences between MPH and SPH, helping readers choose between methods for different purposes - Provides pieces of computer code that readers can use in their own simulations - Includes the full, extended algorithms - Explores the use of MPS in a range of industries and applications, including practical advice

Download or read book Direct and Large Eddy Simulation XI written by Maria Vittoria Salvetti and published by Springer. This book was released on 2019-02-02 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 11th workshop on Direct and Large Eddy Simulation (DLES), which was held in Pisa, Italy in May 2017. The event focused on modern techniques for simulating turbulent flows based on the partial or full resolution of the instantaneous turbulent flow structures, as Direct Numerical Simulation (DNS), Large-Eddy Simulation (LES) or hybrid models based on a combination of LES and RANS approaches. In light of the growing capacities of modern computers, these approaches have been gaining more and more interest over the years and will undoubtedly be developed and applied further. The workshop offered a unique opportunity to establish a state-of-the-art of DNS, LES and related techniques for the computation and modeling of turbulent and transitional flows and to discuss about recent advances and applications. This volume contains most of the contributed papers, which were submitted and further reviewed for publication. They cover advances in computational techniques, SGS modeling, boundary conditions, post-processing and data analysis, and applications in several fields, namely multiphase and reactive flows, convection and heat transfer, compressible flows, aerodynamics of airfoils and wings, bluff-body and separated flows, internal flows and wall turbulence and other complex flows.

Download or read book High Performance Computing in Science and Engineering 18 written by Wolfgang E. Nagel and published by Springer. This book was released on 2019-06-07 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2018. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.