Download or read book Numerical Modelling of Transient Gas liquid Flows application to Stratified Slug Flow Regimes written by Christian Omgba-Essama and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Two phase Gas liquid Flows in Inclined and Vertical Pipelines written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The present thesis describes the advances made in modelling two-phase flows in inclined pipes using a transient one-dimensional approach. The research is a developement of an existing numerical methodology, capable of simulating stratified and slugging two-phase flows in horizontal or inclined single pipes. The aim of the present work is to extend the capabilities of the approach in order (i) to account for the effect of the pipe topography in the numerical solution of the two-fluid model, and (ii) to simulate vertical bubbly twophase flows at various pressures in large diameter pipes, and (iii) to model stratified and terrain-induced slugging in two-phase flow pipelines made of several uphill, downhill and level sections. A transient compressible two-fluid model based on the one-dimensional form of the mass and momentum conservation equations for the gas and liquid phases, is developed to predict those flow configurations. The wall to fluid and the interphase interactions are accounted for by constitutive relations which are flow regime dependent. The conservation equations are discretized using a finite volume method. An algorithm is created to enable simulations on pipelines made of several sections, and account for the effect of the topography in the simulations. The methodology is applied to the compressible model in order to evaluate the robustness and accuracy of the numerical schemes, especially for the high-resolution Advection Upwinding Splitting Method (AUSM) associated to the compressible model. It also assesses the ability of the method to predict three physical flow regimes, namely stratified, bubbly and terrain-induced slug flows. The terrain-induced slugging study is performed on a slightly inclined ("1.5°) V-section system. The use of hydrodynamic slug correlations for hilly-terrain slugging is discussed. It shows to be conclusive with a good agreement with experimental measurements obtained for slug frequency and slug length predictions. Mechanisms.
Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Multiphase Science and Technology written by G.F. Hewitt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Download or read book Thermo fluid Dynamics of Two Phase Flow written by Mamoru Ishii and published by Springer Science & Business Media. This book was released on 2006-09-28 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for graduate students, scientists and engineers who need in-depth theoretical foundations to solve two-phase problems in various technological systems. Based on extensive research experiences focused on the fundamental physics of two-phase flow, the authors present the detailed theoretical foundation of multi-phase flow thermo-fluid dynamics as they apply to a variety of scenarios, including nuclear reactor transient and accident analysis, energy systems, power generation systems and even space propulsion.
Download or read book Oil Film Dynamics in Aero Engine Bearing Chambers written by Amir Aleem Hashmi and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aero engine bearing chambers are complex machine elements inside the engines, supporting up to three concentric shafts on bearings. For safety reasons, the aero engines always employ rolling-element type bearings and therefore require a sufficient oil supply for lubrication in order to guarantee a reliable operation. As a consequence, a complex two-phase flow consisting of oil and sealing air governs the bearing chambers. A highly dynamic oil film, flowing along the chamber walls, plays a vital role to fulfill the tasks of cooling, lubricating and cleaning the bearing chambers. The design and optimization process of the bearing chambers requires a detailed understanding in order to accurately simulate the film behaviour inside the bearing chambers. Based on the earlier experimental investigations, it is known that near the scavenge off-take a relatively thick film exists. The numerical model to simulate these films must therefore take into account the elliptical behaviour of such films. Among the different models, the Volume Of Fluid (VOF) Model offers the best compromise between accuracy and efforts. However, preliminary attempts to model a fully developed and turbulent test case from literature revealed an unphysical pressure drop and velocity profile in the gas phase above the film flow. An inadequate turbulence modelling near the gas-liquid interface was identified as the problem source. The 2-Equation turbulence models (k- epsilon & k- omega) were extended to achieve a substantial improvement.
Download or read book Analysis of slug flow in horizontal pipelines by the two fluid model written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Diversos processos práticos apresentam uma seqüência de diferentes configurações de escoamentos bifásicos, com diferentes padrões de escoamento. Dependendo das razões entre as velocidades superficiais do gás e do líquido, diferentes padrões de escoamento bifásico podem ser encontrados. O padrão de escoamento slug pode ser formado a partir do padrão estratificado, devido ao crescimento das instabilidades hidrodinâmicas ou devido às ondulações noterreno onde se instala a tubulação. O presente trabalho consiste na análise do escoamento bifásico no padrão slug, ao longo de tubulações horizontais, mediante a aplicaçãodo modelo de dois fluidos em sua forma transiente e unidimensional. Através de uma análise de estabilidade de Kelvin-Helmholtz para escoamento estratificado, estima-se a possível faixa de operação para a obtenção de um modelomatemático bem posto. Diferentes técnicas de discretização foram implementadas e testadas. Comparações com dados disponíveis na literatura foram realizadas.
Download or read book Computational Methods for Multiphase Flow written by Andrea Prosperetti and published by Cambridge University Press. This book was released on 2009-06-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to high-speed computers and advanced algorithms, the important field of modelling multiphase flows is an area of rapid growth. This one-stop account – now in paperback, with corrections from the first printing – is the ideal way to get to grips with this topic, which has significant applications in industry and nature. Each chapter is written by an acknowledged expert and includes extensive references to current research. All of the chapters are essentially independent and so the book can be used for a range of advanced courses and the self-study of specific topics. No other book covers so many topics related to multiphase flow, and it will therefore be warmly welcomed by researchers and graduate students of the subject across engineering, physics, and applied mathematics.
Download or read book Multiphase Flow Metering written by Gioia Falcone and published by Elsevier. This book was released on 2009-11-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors' strong background on multiphase flow and by practical examples. These are based on the authors' direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students.* Written by leading scholars and industry experts of international standing* Includes strong coverage of the theoretical background, yet also provides practical examples and current developments* Provides practical reference for professionals, students and academics
Download or read book Two Phase Flow in Complex Systems written by Salomon Levy and published by John Wiley & Sons. This book was released on 1999-08-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mehrphasige Strömungen spielen in etlichen Industriezweigen, besonders der Luft- und Raumfahrt und der Energieerzeugung, eine zentrale Rolle. Derart komplexe Strömungsvorgänge sind extrem schwer vorauszuberechnen, zu analysieren und zu testen. Wertvolle Hilfestellungen, die für reale technische Situationen gedacht sind, gibt dieser Band, der auch Quelltexte einschlägiger Computerprogramme enthält. (07/99)
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.
Download or read book Multiphase Flow Dynamics 2 written by Nikolay Ivanov Kolev and published by Springer Science & Business Media. This book was released on 2011-11-03 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-phase flows are part of our natural environment such as tornadoes, typhoons, air and water pollution and volcanic activities as well as part of industrial technology such as power plants, combustion engines, propulsion systems, or chemical and biological industry. The industrial use of multi-phase systems requires analytical and numerical strategies for predicting their behavior. .In its fourth extended edition the successful monograph package “Multiphase Flow Daynmics” contains theory, methods and practical experience for describing complex transient multi-phase processes in arbitrary geometrical configurations, providing a systematic presentation of the theory and practice of numerical multi-phase fluid dynamics. In the present second volume the methods for describing the mechanical interactions in multiphase dynamics are provided. This fourth edition includes various updates, extensions, improvements and corrections. "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended,” BERND PLATZER, ZAAM In the present second volume the methods for describing the mechanical interactions in multiphase dynamics are provided. This fourth edition includes various updates, extensions, improvements and corrections. "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended,” BERND PLATZER, ZAAM "The literature in the field of multiphase flows is numerous. Therefore, it is very important to have a comprehensive and systematic overview including useful numerical methods. The volumes have the character of a handbook and accomplish this function excellently. The models are described in detail and a great number of comprehensive examples and some cases useful for testing numerical solutions are included. These two volumes are very useful for scientists and practicing engineers in the fields of technical thermodynamics, chemical engineering, fluid mechanics, and for mathematicians with interest in technical problems. Besides, they can give a good overview of the dynamically developing, complex field of knowledge to students. This monograph is highly recommended,” BERND PLATZER, ZAAM
Download or read book Gas liquid Flows written by Barry J. Azzopardi and published by Begell House Publishers. This book was released on 2006-01-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Modeling and Experimental Investigation of Gas liquid Slug Formation in a Microchannel T junction written by Rafael Mattos dos Santos and published by . This book was released on 2007 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-liquid two-phase flow in a microfluidic T-junction with nearly square microchannels of 113 mum hydraulic diameter was investigated experimentally and numerically. Air and water superficial velocities were 0.018-0.791 m/s and 0.042-0.757 m/s, respectively. Three-dimensional modeling was performed with computational fluid dynamics (CFD) package FLUENT and the volume-of-fluid (VOF) model. 3D modeling resolved surface tension effects more accurately than 2D simulation. Slug flow (snapping/breaking/jetting) and stratified flow were observed experimentally. From numerical results void fraction followed a linear relationship with the homogeneous void fraction; two-phase frictional pressure drop fitted the Lockhart-Martinelli correlation with a Chisholm constant of 5; and the contact angle value affected the shape and size of gas slugs and determined the occurrence of liquid film and corner flow. Correlations were developed for prediction of flow parameters. Higher experimental velocity slip caused by gas inlet pressure build-up can result in deviation from numerical predictions.
Download or read book Direct Numerical Simulations of Gas Liquid Multiphase Flows written by Grétar Tryggvason and published by Cambridge University Press. This book was released on 2011-03-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accurately predicting the behaviour of multiphase flows is a problem of immense industrial and scientific interest. Modern computers can now study the dynamics in great detail and these simulations yield unprecedented insight. This book provides a comprehensive introduction to direct numerical simulations of multiphase flows for researchers and graduate students. After a brief overview of the context and history the authors review the governing equations. A particular emphasis is placed on the 'one-fluid' formulation where a single set of equations is used to describe the entire flow field and interface terms are included as singularity distributions. Several applications are discussed, showing how direct numerical simulations have helped researchers advance both our understanding and our ability to make predictions. The final chapter gives an overview of recent studies of flows with relatively complex physics, such as mass transfer and chemical reactions, solidification and boiling, and includes extensive references to current work.
Download or read book ICREEM 2022 written by Faiz Ahmad and published by Springer Nature. This book was released on with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas liquid Transient Flow in Horizontal Pipes written by and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies (Taitel and Dukler, 1976) have provided a method for predicting conditions for flow regime transitions by modelling the actual physical processes taking place. This work was concerned only with steady flow conditions. Of considerable importance to the analysis of a Loss of Cooling Accident is the ability to predict the flow regime under conditions of transient flow. This report extends the steady state method of analysis to that of transient flow. It is shown that under transient conditions the transitions between flow patterns can occur at flow rates different than that which will take place if the changes in flow rate were to take place infinitely slowly. Furthermore, for rapid changes in flow rates from one set of conditions to another, flow regimes can appear which would not be observed if the change were made slowly. The theory for flow regime changes under transient flow conditions is developed and methods for predicting the onset of transition under transients presented. Experimental confirmation of the theory is described.
