Download or read book Numerical Modelling of Material Deformation Processes written by Peter Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.
Download or read book Numerical Modelling and Simulation of Metal Processing written by Christof Sommitsch and published by MDPI. This book was released on 2021-08-16 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with metal processing and its numerical modelling and simulation. In total, 21 papers from different distinguished authors have been compiled in this area. Various processes are addressed, including solidification, TIG welding, additive manufacturing, hot and cold rolling, deep drawing, pipe deformation, and galvanizing. Material models are developed at different length scales from atomistic simulation to finite element analysis in order to describe the evolution and behavior of materials during thermal and thermomechanical treatment. Materials under consideration are carbon, Q&T, DP, and stainless steels; ductile iron; and aluminum, nickel-based, and titanium alloys. The developed models and simulations shall help to predict structure evolution, damage, and service behavior of advanced materials.
Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta C. Oliveira and published by MDPI. This book was released on 2020-04-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Numerical Modelling written by Peep Miidla and published by BoD – Books on Demand. This book was released on 2012-03-23 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates applications and case studies performed by experts for professionals and students in the field of technology, engineering, materials, decision making management and other industries in which mathematical modelling plays a role. Each chapter discusses an example and these are ranging from well-known standards to novelty applications. Models are developed and analysed in details, authors carefully consider the procedure for constructing a mathematical replacement of phenomenon under consideration. For most of the cases this leads to the partial differential equations, for the solution of which numerical methods are necessary to use. The term Model is mainly understood as an ensemble of equations which describe the variables and interrelations of a physical system or process. Developments in computer technology and related software have provided numerous tools of increasing power for specialists in mathematical modelling. One finds a variety of these used to obtain the numerical results of the book.
Download or read book Computational Methods and Experimental Measurements XVII written by G.M. Carlomagno and published by WIT Press. This book was released on 2015-05-05 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the seventeenth in a series of biennial meetings organised by the Wessex Institute and first held in 1984, this book includes the latest research from scientists who perform experiments, researchers who develop computer codes, and those who carry out measurements on prototypes and whose work may interact. Progress in the engineering sciences is dependent on the orderly and concurrent development of all three fields. Continuous improvement in computer efficiency, coupled with diminishing costs and rapid development of numerical procedures have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. As these procedures continue to grow in magnitude and complexity, it is essential to be certain of their reliability, i.e. to validate their results. This can be achieved by performing dedicated and accurate experiments. At the same time, current experimental techniques have become more complex and sophisticated so that they require the exploitation of computers, both for running experiments as well as acquiring and processing the resulting data. The papers contained in the book address advances in the interaction between these three areas. They cover such topics as: Computational and Experimental Methods; Fluid Flow; Structural and Stress Analysis; Materials Characterisation; Heat Transfer and Thermal Processes; Advances in Computational Methods; Automotive Applications; Applications in Industry; Process Simulations; Environmental Modelling and Applications; Computer Modelling; Validation of Computer Modelling; Computation in Measurements; Data Processing of Experiments; Virtual Testing and Verification; Simulation and Forecasting; Measurements in Engineering.
Download or read book Numerical Modeling of Materials Under Extreme Conditions written by Nicola Bonora and published by Springer. This book was released on 2014-05-09 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents twelve state of the art contributions in the field of numerical modeling of materials subjected to large strain, high strain rates, large pressure and high stress triaxialities, organized into two sections. The first part is focused on high strain rate-high pressures such as those occurring in impact dynamics and shock compression related phenomena, dealing with material response identification, advanced modeling incorporating microstructure and damage, stress waves propagation in solids and structures response under impact. The latter part is focused on large strain-low strain rates applications such as those occurring in technological material processing, dealing with microstructure and texture evolution, material response at elevated temperatures, structural behavior under large strain and multi axial state of stress.
Download or read book Introduction to Numerical Geodynamic Modelling written by Taras Gerya and published by Cambridge University Press. This book was released on 2010 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user-friendly reference for students and researchers presents the basic mathematical theory, before introducing modelling of key geodynamic processes.
Download or read book Metal Forming written by Taylan Altan and published by ASM International(OH). This book was released on 1983 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Briefly reviews the basic principles of metal forming but major emphasis is on the latest developments in the design of metal-forming operations and tooling. Discusses the position of metal forming in manufacturing and considers a metal-forming process as a system consisting of several interacting variables. Includes an overall review and classification of all metal-forming processes. The fundamentals of plastic deformation - metal flow, flow stress of metals and yield criteria - are discussed, as are significant practical variables of metal- forming processes such as friction, temperatures and forming machines and their characteristics. Examines approximate methods of analyzing simple forming operations, then looks at massive forming processes such as closed-die forging, hot extrusion, cold forging/ extrusion, rolling and drawing (discussion includes the prediction of stresses and load in each process and applications of computer-aided techniques). Recent developments in metal-forming technology, including CAD/CAM for die design and manufacture, are discussed, and a review of the latest trends in metal flow analysis and simulations.
Download or read book Numerical Modeling in Micromechanics via Particle Methods written by H. Konietzky and published by CRC Press. This book was released on 2002-01-01 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle methods have seen increasing use in several engineering and scientific fields, both because of their unique modelling capabilities and the availability of the necessary computational power. This title focuses on their theory and application.
Download or read book Numerical Modelling of Material Deformation Processes written by Peter Hartley and published by Springer. This book was released on 1992-05-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.
Download or read book Integral Materials Modeling written by Günter Gottstein and published by John Wiley & Sons. This book was released on 2007-04-09 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a holistic approach to materials simulation, this monograph covers four very important structural materials: aluminum, carbon steels, superalloys, and plastics. Following an introduction to the concept of integral modeling, the book goes on to cover a wide range of production steps and usage, including melt flow and solidification behavior, coating, shaping, thermal treatment, deep drawing, hardness and ductility, damage initiation, and deformation behavior.
Download or read book Innovative Numerical Modelling in Geomechanics written by Luis Ribeiro e Sousa and published by CRC Press. This book was released on 2012-05-03 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1990s five books onApplications of Computational Mechanics in Geotechnical Engineering have been published. Innovative Numerical Modelling in Geomechanics is the 6th and final book in this series, and contains papers written by leading experts on computational mechanics. The book treats highly relevant topics in the field of geotechnic
Download or read book Management Manufacturing and Materials Engineering written by Liu Pei and published by Trans Tech Publications Ltd. This book was released on 2012-01-24 with total page 1555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2011 International Conference on Management, Manufacturing and Materials Engineering (ICMMM 2011), December 8-10, 2011, Zhengzhou, China
Download or read book Numerical Modeling in Materials Science and Engineering written by Michel Rappaz and published by Springer Science & Business Media. This book was released on 2002-11-05 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computing application to materials science is one of the fastest-growing research areas. This book introduces the concepts and methodologies related to the modeling of the complex phenomena occurring in materials processing. It is intended for undergraduate and graduate students in materials science and engineering, mechanical engineering and physics, and for engineering professionals or researchers.
Download or read book Numerical Modelling of Construction Processes in Geotechnical Engineering for Urban Environment written by Theodoros Triantafyllidis and published by CRC Press. This book was released on 2006-02-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly important, particularly in an urban environment, to predict soil behaviour and to confine the settlement or deformation of buildings adjacent to construction sites. One important factor is the choice of construction procedure for the installation of piles, sheet pile walls, anchors or for soil improvement techniques, ground freezing and tunnelling methods. The modelling of construction processes, which are frequently associated with large deformations of the soil and with strong changes in the structure of the soil around the construction plant, in the case of, for example, a drill, a bit, a vibrator, or an excavation tool, requires sophisticated and new methods in numerical modelling. Often the simulation of the construction procedure is neglected in the calculations. Such methods are described and discussed in this book, as are examples of the methods applied to geotechnical practice, field and laboratory testing as well as case studies. This volume provides a valuable source of reference for scientists in geotechnical engineering and numerical modelling, geotechnical engineers, post graduate students, construction companies and consultants, manufacturers of geotechnical construction plants and software suppliers and developers of geotechnical construction methods.
Download or read book Modeling of Metal Forming and Machining Processes written by Prakash Mahadeo Dixit and published by Springer Science & Business Media. This book was released on 2008-05-14 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by authorities in the subject, this book provides a complete treatment of metal forming and machining by using the computational techniques FEM, fuzzy set theory and neural networks as modelling tools. The algorithms and solved examples included make this book of value to postgraduates, senior undergraduates, and lecturers and researchers in these fields. Research and development engineers and consultants for the manufacturing industry will also find it of use.
