Download or read book Computational heat and mass transfer CHMT 2001 Vol I written by and published by Editora E-papers. This book was released on with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Low Temperature and Cryogenic Refrigeration written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refrigeration plays a prominent role in our everyday lives, and cryogenics plays a major role in medical science, space technology and the cooling of low-temperature electronics. This volume contains chapters on basic refrigeration systems, non-compression refrigeration and cooling, and topics related to global environmental issues, alternative refrigerants, optimum refrigerant selection, cost-quality optimization of refrigerants, advanced thermodynamics of reverse-cycle machines, applications in medicine, cryogenics, heat pipes, gas-solid absorption refrigeration, multisalt resorption heat pumps, cryocoolers, thermoacoustic refrigeration, cryogenic heat transfer and enhancement and other topics covering theory, design, and applications, such as pulse tube refrigeration, which is the most efficient of all cryocoolers and can be used in space missions.

Download or read book Heat Transfer in Condensation and Boiling written by Karl Stephan and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering.

Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.

Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Investigation of Pressure Drop and Dynamic Instabilities in Two phase Flow written by Thomas Lanz and published by Cuvillier Verlag. This book was released on 2020-12-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zweiphasenströmungen, insbesondere Wasser/Dampf-Strömungen, sind für die Auslegung und den Betrieb thermohydraulischer Systeme nach wie vor von großem Interesse. Diese Arbeit befasst sich mit der Untersuchung des Druckverlustes und dynamischer Instabilitäten (hier Dichtewellenoszillationen) in Wasser/Dampf-Strömungen mittels zweier unterschiedlicher Ansätze unter praxisnahen Bedingungen. Zum einen wird ein Versuchsstand entwickelt, aufgebaut und in Betrieb genommen, um mit diesem entsprechende Versuche an einem Verdampferrohr durchzuführen. Zum anderen werden dynamische Simulationen mit einem homogenen („mixture flow“) und einem heterogenen („two-fluid“) Strömungsmodell durchgeführt und miteinander und mit den Messdaten verglichen. Die experimentellen und numerischen Ergebnisse lassen sich schließlich in dimensionslosen Stabilitätskarten zusammenfassen, welche die Betriebsgrenzen beschreiben, bei denen Dichtewellenoszillationen in thermohydraulisch ähnlichen Systemen auftreten können.

Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iii Macro And Micro Flow Boiling And Numerical Modeling Fundamentals A 4 volume Set written by John R Thome and published by World Scientific. This book was released on 2018-03-13 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set III of this encyclopedia is a new addition to the previous Sets I and II. It contains 26 invited chapters from international specialists on the topics of numerical modeling of two-phase flows and evaporation, fundamentals of evaporation and condensation in microchannels and macrochannels, development and testing of micro two-phase cooling systems for electronics, and various special topics (surface wetting effects, microfin tubes, two-phase flow vibration across tube bundles). The chapters are written both by renowned university researchers and by well-known engineers from leading corporate research laboratories. Numerous 'must read' chapters cover the fundamentals of research and engineering practice on boiling, condensation and two-phase flows, two-phase heat transfer equipment, electronics cooling systems, case studies and so forth. Set III constitutes a 'must have' reference together with Sets I and II for thermal engineering researchers and practitioners.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation of Power Plants and Firing Systems written by Heimo Walter and published by Springer. This book was released on 2017-04-18 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises the fundamentals of the numerical simulation of fluid flows as well as the modelling of a power plant and plant components. The fundamental equations for heat and mass transfer will be prepared for the application in the numerical simulation. Selected numerical methods will be discussed in detail. The book will deal with the gas as well as with the water/steam flow. Regulation and controller, simplified models and hybrid models as well as the validation of measurement data are also included in the book.

Download or read book Coolant Flow Instabilities in Power Equipment written by Vladimir B. Khabensky and published by CRC Press. This book was released on 2012-12-17 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal-hydraulic instability can potentially impair thermal reliability of reactor cores or other power equipment components. Thus it is important to address stability issues in power equipment associated with thermal and nuclear installations, particularly in thermal nuclear power plants, chemical and petroleum industries, space technology, and radio, electronic, and computer cooling systems. Coolant Flow Instabilities in Power Equipment synthesizes results from instability investigations around the world, presenting an analysis and generalization of the published technical literature. The authors include individual examples on flow stability in various types of equipment, including boilers, reactors, steam generators, condensers, heat exchangers, turbines, pumps, deaerators, bubblers, and pipelines. They also present information that has not been widely available until recently, such as thermal-acoustic instability, flow instability with supercritical parameters, and single-phase coolant flow static instability. The material described in this book is derived from vast amounts of experimental data from thermal-physical test facilities and full-scale installations. It is presented in a manner accessible to readers without advanced mathematical backgrounds. Particular attention has been paid to oscillatory (low-frequency and thermal-acoustic) and static thermal-hydraulic coolant flow instability. In addition, the physical mechanism of instability has been considered in detail. This book provides knowledge of the various types of flow instability, the equipment where this instability can manifest, and the ensuing consequences, as well as makes recommendations concerning possible removal or mitigation of these consequences. The authors provide this information as a useful reference for readers to facilitate the enhanced safety of modern power equipment through qualitative evaluation of design and flow parameters and subsequent selection of the optimal means for increasing flow stability.

Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2014-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.

Download or read book Mathematical Modelling Courses for Engineering Education written by Yasar Ersoy and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the role of the modern engineer is markedly different from that of even a decade ago, the theme of engineering mathematics educa tion (EME) is an important one. The need for mathematical model ling (MM) courses and consideration of the educational impact of computer-based technology environments merit special attention. This book contains the proceeding of the NATO Advanced Research Workshop held on this theme in July 1993. We have left the industrial age behind and have entered the in formation age. Computers and other emerging technologies are penetrating society in depth and gaining a strong influence in de termining how in future society will be organised, while the rapid change of information requires a more qualified work force. This work force is vital to high technology and economic competitive ness in many industrialised countries throughout the world. Within this framework, the quality of EME has become an issue. It is expected that the content of mathematics courses taught in schools of engineering today have to be re-evaluated continuously with regard to computer-based technology and the needs of mod ern information society. The main aim of the workshop was to pro vide a forum for discussion between mathematicians, engineering scientists, mathematics educationalists, and courseware develop ers in the higher education sector and to focus on the issues and problems of the design of more relevant and appropriate MM courses for engineering education.

Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description