Download or read book Numerical Methods for 2 Dimensional Modeling written by W. D. Murphy and published by . This book was released on 1980 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress toward the development of a fast algorithm for two-dimensional computational modeling of VLSI fabrication processes is described. The first report of an algorithm producing two-dimensional dopant profiles in seconds per process step is presented. A summary of investigations to date and plans for future work are discussed. (Author).
Download or read book Numerical Methods for Two phase Incompressible Flows written by Sven Gross and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first monograph providing an introduction to and an overview of numerical methods for the simulation of two-phase incompressible flows. The Navier-Stokes equations describing the fluid dynamics are examined in combination with models for mass and surfactant transport. The book pursues a comprehensive approach: important modeling issues are treated, appropriate weak formulations are derived, level set and finite element discretization techniques are analyzed, efficient iterative solvers are investigated, implementational aspects are considered and the results of numerical experiments are presented. The book is aimed at M Sc and PhD students and other researchers in the fields of Numerical Analysis and Computational Engineering Science interested in the numerical treatment of two-phase incompressible flows.
Download or read book Numerical Methods for 2 Dimensional Modelling written by W. D. Murphy and published by . This book was released on 1983 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document constitutes the final report on research in efficient numerical methods for two-dimensional VLSI process modeling. The major output of this work is embodied in the computer code MEMBRE (for Multidimensional Efficient Moving Boundary Redistribution) and the associated user's manual. This code predicts the two-dimensional dopant profiles which evolve during oxidation and drive-in, including those effects arising from formation of the bird's beak oxide profile and from concentration dependence of the diffusivity at high doping levels. Typical CPU (Central processing unit) times for a complete redistribution process, involving several thermal cycles, are found to range from two to ten minutes on the IBM 3033. In the final phase of the contract, modifications have been introduced in the basic code to increase the speed of solution for the more difficult cases (e.g., arsenic drive-in). A factor of two reduction in CPU time was to be achievable without deterioration in solution accuracy through the use of nonuniform spatial grids. MEMBRE has been made available on tape to the U.S. integrated circuits community in the form of a FORTRAN program executable on the IBM 3033. It contains the basic input/output routines from Standard's one-dimensional process code SUPREM, modified to deal with two-dimensional process data. Its capabilities have been described in presentations at two technical meetings and in article to appear in the new journal COMPEL. Eight requests for the code from integrated circuit manufacturers and researchers in the U.S. have been processed to date. (Author).
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.
Download or read book Numerical Methods for Nonlinear Engineering Models written by John R. Hauser and published by Springer Science & Business Media. This book was released on 2009-03-24 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many books on the use of numerical methods for solving engineering problems and for modeling of engineering artifacts. In addition there are many styles of such presentations ranging from books with a major emphasis on theory to books with an emphasis on applications. The purpose of this book is hopefully to present a somewhat different approach to the use of numerical methods for - gineering applications. Engineering models are in general nonlinear models where the response of some appropriate engineering variable depends in a nonlinear manner on the - plication of some independent parameter. It is certainly true that for many types of engineering models it is sufficient to approximate the real physical world by some linear model. However, when engineering environments are pushed to - treme conditions, nonlinear effects are always encountered. It is also such - treme conditions that are of major importance in determining the reliability or failure limits of engineering systems. Hence it is essential than engineers have a toolbox of modeling techniques that can be used to model nonlinear engineering systems. Such a set of basic numerical methods is the topic of this book. For each subject area treated, nonlinear models are incorporated into the discussion from the very beginning and linear models are simply treated as special cases of more general nonlinear models. This is a basic and fundamental difference in this book from most books on numerical methods.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Numerical Methods for 2 Dimensional Process Modeling written by W. D. Murphy and published by . This book was released on 1981 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completion and testing of a fast algorithm for the calculation of two-dimensional dopant redistribution during oxide growth is described. A numerical comparison with analytical, exact solutions for low-dose implants is made which shows negligible error. (Author).
Download or read book Numerical Methods for Shallow Water Flow written by C.B. Vreugdenhil and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide variety of problems are associated with the flow of shallow water, such as atmospheric flows, tides, storm surges, river and coastal flows, lake flows, tsunamis. Numerical simulation is an effective tool in solving them and a great variety of numerical methods are available. The first part of the book summarizes the basic physics of shallow-water flow needed to use numerical methods under various conditions. The second part gives an overview of possible numerical methods, together with their stability and accuracy properties as well as with an assessment of their performance under various conditions. This enables the reader to select a method for particular applications. Correct treatment of boundary conditions (often neglected) is emphasized. The major part of the book is about two-dimensional shallow-water equations but a discussion of the 3-D form is included. The book is intended for researchers and users of shallow-water models in oceanographic and meteorological institutes, hydraulic engineering and consulting. It also provides a major source of information for applied and numerical mathematicians.
Download or read book Floods in a Changing Climate written by Giuliano Di Baldassarre and published by Cambridge University Press. This book was released on 2012-11-22 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flood inundation models enable us to make hazard predictions for floodplains, mitigating increasing flood fatalities and losses. This book provides an understanding of hydraulic modelling and floodplain dynamics, with a key focus on state-of-the-art remote sensing data, and methods to estimate and communicate uncertainty. Academic researchers in the fields of hydrology, climate change, environmental science and natural hazards, and professionals and policy-makers working in flood risk mitigation, hydraulic engineering and remote sensing will find this an invaluable resource. This volume is the third in a collection of four books on flood disaster management theory and practice within the context of anthropogenic climate change. The others are: Floods in a Changing Climate: Extreme Precipitation by Ramesh Teegavarapu, Floods in a Changing Climate: Hydrological Modeling by P. P. Mujumdar and D. Nagesh Kumar and Floods in a Changing Climate: Risk Management by Slodoban Simonović.
Download or read book Groundwater Contamination in Coastal Aquifers written by Senapathi Venkatramanan and published by Elsevier. This book was released on 2022-06-22 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater Contamination in Coastal Aquifers: Assessment and Management first describes groundwater contamination in coastal aquifers and then delves into specific topics surrounding various hydrogeochemical processes. Next, the book covers case studies of groundwater quality assessment using recent techniques, explains the various pollutants and contaminants in coastal aquifers, and covers management and remediation methods to control contamination in coastal aquifers. This key reference encompasses various topics in broader perspectives on groundwater contamination in coastal aquifers, providing a significant contribution to the field of hydrogeology. - Presents global case studies that show the reader how this issue is affecting sites around the world - Includes a remediation plan that solves problems surrounding the management of groundwater, water treatment techniques, and the management of available groundwater resources - Provides advanced techniques that can be applied and used as methodologies for solving groundwater issues
Download or read book Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes written by Miguel Cerrolaza and published by Academic Press. This book was released on 2017-12-28 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes covers new and exciting modeling methods to help bioengineers tackle problems for which the Finite Element Method is not appropriate. The book covers a wide range of important subjects in the field of numerical methods applied to biomechanics, including bone biomechanics, tissue and cell mechanics, 3D printing, computer assisted surgery and fluid dynamics. Modeling strategies, technology and approaches are continuously evolving as the knowledge of biological processes increases. Both theory and applications are covered, making this an ideal book for researchers, students and R&D professionals. - Provides non-conventional analysis methods for modeling - Covers the Discrete Element Method (DEM), Particle Methods (PM), MessLess and MeshFree Methods (MLMF), Agent-Based Methods (ABM), Lattice-Boltzmann Methods (LBM) and Boundary Integral Methods (BIM) - Includes contributions from several world renowned experts in their fields - Compares pros and cons of each method to help you decide which method is most applicable to solving specific problems
Download or read book Numerical Analysis A R Mitchell 75th Birthday Volume written by D F Griffiths and published by World Scientific. This book was released on 1996-05-15 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is intended to mark the 75th birthday of A R Mitchell, of the University of Dundee. It consists of a collection of articles written by numerical analysts having links with Ron Mitchell, as colleagues, collaborators, former students, or as visitors to Dundee. Ron Mitchell is known for his books and articles contributing to the numerical analysis of partial differential equations; he has also made major contributions to the development of numerical analysis in the UK and abroad, and his many human qualitites are such that he is held in high regard and looked on with great affection by the numerical analysis community. The list of contributors is evidence of the esteem in which he is held, and of the way in which his influence has spread through his former students and fellow workers. In addition to contributions relevant to his own specialist subjects, there are also papers on a wide range of subjects in numerical analysis.
Download or read book Numerical Techniques for Global Atmospheric Models written by Peter H. Lauritzen and published by Springer Science & Business Media. This book was released on 2011-03-29 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book surveys recent developments in numerical techniques for global atmospheric models. It is based upon a collection of lectures prepared by leading experts in the field. The chapters reveal the multitude of steps that determine the global atmospheric model design. They encompass the choice of the equation set, computational grids on the sphere, horizontal and vertical discretizations, time integration methods, filtering and diffusion mechanisms, conservation properties, tracer transport, and considerations for designing models for massively parallel computers. A reader interested in applied numerical methods but also the many facets of atmospheric modeling should find this book of particular relevance.
Download or read book 3 Dimensional Modeling in Cardiovascular Disease written by Evan M. Zahn and published by Elsevier Health Sciences. This book was released on 2019-09-14 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by physicians and surgeons, imaging specialists, and medical technology engineers, and edited by Dr. Evan M. Zahn of the renowned Cedars-Sinai Heart Institute, this concise, focused volume covers must-know information in this new and exciting field. Covering everything from the evolution of 3D modeling in cardiac disease to the various roles of 3D modeling in cardiology to cardiac holography and 3D bioprinting, 3-Dimensional Modeling in Cardiovascular Disease is a one-stop resource for physicians, cardiologists, radiologists, and engineers who work with patients, support care providers, and perform research. - Provides history and context for the use of 3D printing in cardiology settings, discusses how to use it to plan and evaluate treatment, explains how it can be used as an education resource, and explores its effectiveness with medical interventions. - Presents specific uses for 3D modeling of the heart, examines whether it improves outcomes, and explores 3D bioprinting. - Consolidates today's available information and guidance into a single, convenient resource.
Download or read book Numerical Methods for Diffusion Phenomena in Building Physics written by Nathan Mendes and published by Springer Nature. This book was released on 2019-11-29 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second edition of Numerical methods for diffusion phenomena in building physics: a practical introduction originally published by PUCPRESS (2016). It intends to stimulate research in simulation of diffusion problems in building physics, by providing an overview of mathematical models and numerical techniques such as the finite difference and finite-element methods traditionally used in building simulation tools. Nonconventional methods such as reduced order models, boundary integral approaches and spectral methods are presented, which might be considered in the next generation of building-energy-simulation tools. In this reviewed edition, an innovative way to simulate energy and hydrothermal performance are presented, bringing some light on innovative approaches in the field.
Download or read book Hydrology written by Andre Musy and published by CRC Press. This book was released on 2014-07-23 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main hydrological methods and techniques used in the design and operation of hydraulic projects and the management of water resources and associated natural risks. It covers the key topics of water resources engineering, from the estimation of runoff volumes and unit hydrographs to the routing of flows along a river and throu
Download or read book Numerical Methods and Modelling Methodologies in Computational Biomechanics written by C. A. Duque-Daza and published by Cambridge Scholars Publishing. This book was released on 2023-07-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a description of the use of engineering simulation methods in a clear, direct and concise way, containing several relevant examples of biomechanics and biological processes analyzed with different numerical methods. It is oriented towards undergraduate and graduate students, academics, professionals, technicians and to all those interested in the use of simulation in computational biomechanics. The book begins with a review of the concepts of solid and fluid mechanics, followed by a description of engineering approximation methods such as the Finite Volume Method, the Finite Element Method and the Boundary Element Method. Then, several applications that usually appear in biomechanics modeling are presented and discussed, from the simulation of osseointegration to the simulation of lung airflow and the modeling of biological processes in intervertebral discs and mechanobiology. The book can be used as an educational tool in undergraduate courses and in introductory courses in graduate biology, medicine and engineering.
