Download or read book Flow Processes in Faults and Shear Zones written by G. Ian Alsop and published by Geological Society of London. This book was released on 2004 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faults and their deeper level equivalents, shear zones, are localized regions of intense deformation within the Earth. They are recognized at all scales from micro to plate boundary, and are important examples of the nature of heterogeneous deformation in natural rocks. Faults and shear zones are significant as they profoundly influence the location, architecture and evolution of a broad range of geological phenomenao The topography and bathymetry of the Earth's surface is marked by mountain belts and sedimentary basins that are controlled by faults and shear zoneso In addition, faults and shear zones control fluid migration and transport including hydrothermal and hydrocarbon systems. Once faults and shear zones are established, they are often long-lived features prone to multiple reactivation over very large time-scales. This collection of papers addresses lithospheric deformation and the rheology of shear zones, together with processes of partitioning and the unravelling of fault and shear zone histories.

Download or read book Rifts and Passive Margins written by Michal Nemčok and published by Cambridge University Press. This book was released on 2016-03-02 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive synthesis of state-of-the-art information on vitally important hydrocarbon habitats for advanced geology students and researchers, exploration geoscientists, and petroleum managers.

Download or read book The Internal Structure of Fault Zones written by Christopher A. J. Wibberley and published by Geological Society of London. This book was released on 2008 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faults are primary focuses of both fluid migration and deformation in the upper crust. The recognition that faults are typically heterogeneous zones of deformed material, not simple discrete fractures, has fundamental implications for the way geoscientists predict fluid migration in fault zones, as well as leading to new concepts in understanding seismic/aseismic strain accommodation. This book captures current research into understanding the complexities of fault-zone internal structure, and their control on mechanical and fluid-flow properties of the upper crust. A wide variety of approaches are presented, from geological field studies and laboratory analyses of fault-zone and fault-rock properties to numerical fluid-flow modelling, and from seismological data analyses to coupled hydraulic and rheological modelling. The publication aims to illustrate the importance of understanding fault-zone complexity by integrating such diverse approaches, and its impact on the rheological and fluid-flow behaviour of fault zones in different contexts.

Download or read book Advances in Geophysics written by and published by Elsevier. This book was released on 2004-12-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The critically acclaimed serialized review journal for nearly fifty years, Advances in Geophysics is a highly respected publication in the field of geophysics. Since 1952, each volume has been eagerly awaited, frequently consulted, and praised by researchers and reviewers alike. Now with over 45 volumes, the Serial contains much material still relevant today-truly an essential publication for researchers in all fields of geophysics.

Download or read book Fundamentals of Structural Geology written by David D. Pollard and published by Cambridge University Press. This book was released on 2005-09-01 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Structural Geology provides a new framework for the investigation of geological structures by integrating field mapping and mechanical analysis. Assuming a basic knowledge of physical geology, introductory calculus and physics, it emphasizes the observational data, modern mapping technology, principles of continuum mechanics, and the mathematical and computational skills, necessary to quantitatively map, describe, model, and explain deformation in Earth's lithosphere. By starting from the fundamental conservation laws of mass and momentum, the constitutive laws of material behavior, and the kinematic relationships for strain and rate of deformation, the authors demonstrate the relevance of solid and fluid mechanics to structural geology. This book offers a modern quantitative approach to structural geology for advanced students and researchers in structural geology and tectonics. It is supported by a website hosting images from the book, additional colour images, student exercises and MATLAB scripts. Solutions to the exercises are available to instructors.

Download or read book Advances in the Study of Fractured Reservoirs written by G.H. Spence and published by Geological Society of London. This book was released on 2014-08-27 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Naturally fractured reservoirs constitute a substantial percentage of remaining hydrocarbon resources; they create exploration targets in otherwise impermeable rocks, including under-explored crystalline basement; and they can be used as geological stores for anthropogenic carbon dioxide. Their complex behaviour during production has traditionally proved difficult to predict, causing a large degree of uncertainty in reservoir development. The applied study of naturally fractured reservoirs seeks to constrain this uncertainty by developing new understanding, and is necessarily a broad, integrated, interdisciplinary topic. This book addresses some of the challenges and advances in knowledge, approaches, concepts, and methods used to characterize the interplay of rock matrix and fracture networks, relevant to fluid flow and hydrocarbon recovery. Topics include: describing, characterizing and identifying controls on fracture networks from outcrops, cores, geophysical data, digital and numerical models; geomechanical influences on reservoir behaviour; numerical modelling and simulation of fluid flow; and case studies of the exploration and development of carbonate, siliciclastic and metamorphic naturally fractured reservoirs.

Download or read book The Initiation Propagation and Arrest of Joints and Other Fractures written by John W. Cosgrove and published by Geological Society of London. This book was released on 2004 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a state of the art look at our understanding of joint development in the crust. Answers are provided for such questions as the mechanisms by which joints are initiated, the factors controlling the path they follow during the propagation process, and the processes responsible for the arrest of joints. Many of the answers to these questions can be inferred from the geometry of joint surface morphology and joint patterns. Joints are a record of the orientation of stress at the time of propagation and as such they are also useful records of ancient stress fields, regional and local. Because outcrop and subsurface views of joints are limited, statistical techniques are required to characterize joints and joint sets. Finally, joints are subject to post-propagation stresses that further localize deformation and are the focus for the development of new structures.

Download or read book Fault related Deformation Over Geologic Time written by Peter James Lovely and published by Stanford University. This book was released on 2011 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough understanding of the kinematic and mechanical evolution of fault-related structures is of great value, both academic (e.g. How do mountains form?) and practical (e.g. How are valuable hydrocarbons trapped in fault-related folds?). Precise knowledge of the present-day geometry is necessary to know where to drill for hydrocarbons. Understanding the evolution of a structure, including displacement fields, strain and stress history, may offer powerful insights to how and if hydrocarbons might have migrated, and the most efficient way to extract them. Small structures, including faults, fractures, pressure solution seams, and localized compaction, which may strongly influence subsurface fluid flow, may be predictable with a detailed mechanical understanding of a structure's evolution. The primary focus of this thesis is the integration of field observations, geospatial data including airborne LiDAR, and numerical modeling to investigate three dimensional deformational patterns associated with fault slip accumulated over geologic time scales. The work investigates contractional tectonics at Sheep Mountain anticline, Greybull, WY, and extensional tectonics at the Volcanic Tableland, Bishop, CA. A detailed geometric model is a necessary prerequisite for complete kinematic or mechanical analysis of any structure. High quality 3D seismic imaging data provides the means to characterize fold geometry for many subsurface industrial applications; however, such data is expensive, availability is limited, and data quality is often poor in regions of high topography where outcrop exposures are best. A new method for using high resolution topographic data, geologic field mapping and numerical interpolation is applied to model the 3D geometry of a reservoir-scale fold at Sheep Mountain anticline. The Volcanic Tableland is a classic field site for studies of fault slip scaling relationships and conceptual models for evolution of normal faults. Three dimensional elastic models are used to constrain subsurface fault geometry from detailed maps of fault scarps and topography, and to reconcile two potentially competing conceptual models for fault growth: by coalescence and by subsidiary faulting. The Tableland fault array likely initiated as a broad array of small faults, and as some have grown and coalesced, their strain shadows have inhibited the growth and initiation of nearby faults. The Volcanic Tableland also is used as a geologic example in a study of the capabilities and limitations of mechanics-based restoration, a relatively new approach to modeling in structural geology that provides distinct advantages over traditional kinematic methods, but that is significantly hampered by unphysical boundary conditions. The models do not accurately represent geological strain and stress distributions, as many have hoped. A new mechanics-based retrodeformational technique that is not subject to the same unphysical boundary conditions is suggested. However, the method, which is based on reversal of tectonic loads that may be optimized by paleostress analysis, restores only that topography which may be explained by an idealized elastic model. Elastic models are appealing for mechanical analysis of fault-related deformation because the linear nature of such models lends itself to retrodeformation and provides computationally efficient and stable numerical implementation for simulating slip distributions and associated deformation in complicated 3D fault systems. However, cumulative rock deformation is not elastic. Synthetic models are applied to investigate the implications of assuming elastic deformation and frictionless fault slip, as opposed to a more realistic elasto-plastic deformation with frictional fault slip. Results confirm that elastic models are limited in their ability to simulate geologic stress distributions, but that they may provide a reasonable, first-order approximation of strain tensor orientation and the distribution of relative strain perturbations, particularly distal from fault tips. The kinematics of elastic and elasto-plastic models diverge in the vicinity of fault tips. Results emphasize the importance of accurately and completely representing subsurface fault geometry in linear or nonlinear models.

Download or read book Progress in Industrial and Civil Engineering II written by Wei Jun Yang and published by Trans Tech Publications Ltd. This book was released on 2013-09-03 with total page 3562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 2nd International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2013), July 27-28, 2013, Zhuhai, China

Download or read book Fractures Fluid Flow and Mineralization written by Ken McCaffrey and published by Geological Society of London. This book was released on 1999 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrothermal mineralization is usually structurally controlled so it is important to understand the role of faulting and fracturing in enhancing rock permeability and facilitating fluid flow and mass transfer. This is the main theme of this interdisciplinary volume and the papers included are intended to provide an overview of current ideas at the interfaces of structural geology, fluid flow and mineralization research.

Download or read book Structural Geology written by Sean J. Landowe and published by . This book was released on 2008 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural geology includes features of and overlaps with facets of geomorphology, metamorphism and geotechnical studies. By studying the three dimensional structure of rocks and regions, inferences on tectonic history, past geological environments and deformation events can be made. These can be fixed in time using stratigraphical controls as well as geochronology, to determine when the structural features formed. This book provides leading-edge research on this field from around the world.

Download or read book Faulting Fault Sealing and Fluid Flow in Hydrocarbon Reservoirs written by G. Jones and published by Geological Society Publishing House. This book was released on 1998 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation "Compared with many other areas of the petroleum geosciences, studies of the structural controls on fluid flow in hydrocarbon reservoirs are in their infancy. As hydrocarbon reserves have become depleted and the oil industry has become more competitive, the need to cut costs by optimizing production and predicting the occurrence of subtle traps has highlighted the importance of information on the way in which faults and fractures affect fluid flow. Structural geologists are now having to provide answers to questions such as: Are hydrocarbons likely to have migrated into (or out of) the trap? What is the likely height of hydrocarbons that a fault can support? Is it likely that compartments which have not been produced exist within a field and will therefore require further drilling?" "This volume aims to find answers to these questions."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved.

Download or read book Geology of the Country Around Taunton and the Quantock Hills written by E. A. Edmonds and published by Natural Environment Research. This book was released on 1985 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed account of the geology shown on the complementary 1: 50 000 (or earlier 1: 63 360) geological map(s)

Download or read book Fundamental Controls on Fluid Flow in Carbonates written by S.M. Agar and published by Geological Society of London. This book was released on 2015-02-02 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights key challenges for fluid-flow prediction in carbonate reservoirs, the approaches currently employed to address these challenges and developments in fundamental science and technology. The papers span methods and case studies that highlight workflows and emerging technologies in the fields of geology, geophysics, petrophysics, reservoir modelling and computer science. Topics include: detailed pore-scale studies that explore fundamental processes and applications of imaging and flow modelling at the pore scale; case studies of diagenetic processes with complementary perspectives from reactive transport modelling; novel methods for rock typing; petrophysical studies that investigate the impact of diagenesis and fault-rock properties on acoustic signatures; mechanical modelling and seismic imaging of faults in carbonate rocks; modelling geological influences on seismic anisotropy; novel approaches to geological modelling; methods to represent key geological details in reservoir simulations and advances in computer visualization, analytics and interactions for geoscience and engineering.

Download or read book British Regional Geology written by E. A. Edmonds and published by Stationery Office Books (TSO). This book was released on 1975 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Early Earth Systems written by Hugh R. Rollinson and published by John Wiley & Sons. This book was released on 2009-03-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early Earth Systems provides a complete history of the Earth from its beginnings to the end of the Archaean. This journey through the Earth's early history begins with the Earth's origin, then examines the evolution of the mantle, the origin of the continental crust, the origin and evolution of the Earth's atmosphere and oceans, and ends with the origin of life. Looks at the evidence for the Earth's very early differentiation into core, mantle, crust, atmosphere and oceans and how this differentiation saw extreme interactions within the Earth system. Discusses Archaean Earth processes within the framework of the Earth System Science paradigm, providing a qualitative assessment of the principal reservoirs and fluxes in the early Earth. “The book would be perfect for a graduate-level or upper level undergraduate course on the early Earth. It will also serve as a great starting point for researchers in solid-Earth geochemistry who want to know more about the Earth’s early atmosphere and biosphere, and vice versa for low temperature geochemists who want to get a modern overview of the Earth’s interior.” Geological Magazine, 2008

Download or read book The Mechanics of Earthquakes and Faulting written by Christopher H. Scholz and published by Cambridge University Press. This book was released on 2002-05-02 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of earthquakes and faulting processes has developed significantly since publication of the successful first edition of this book in 1990. This revised edition, first published in 2002, was therefore thoroughly up-dated whilst maintaining and developing the two major themes of the first edition. The first of these themes is the connection between fault and earthquake mechanics, including fault scaling laws, the nature of fault populations, and how these result from the processes of fault growth and interaction. The second major theme is the central role of the rate-state friction laws in earthquake mechanics, which provide a unifying framework within which a wide range of faulting phenomena can be interpreted. With the inclusion of two chapters explaining brittle fracture and rock friction from first principles, this book is written at a level which will appeal to graduate students and research scientists in the fields of seismology, physics, geology, geodesy and rock mechanics.