Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.

Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer. This book was released on 2019-03-28 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 3rd International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plants, held in Harbin, China on 15th–17th August 2018. The symposium discussed the status quo, technical advances and development direction of digital instrument control technology, software reliability, information security and physical protection in the process of nuclear power development. Offering technical insights and know from leading experts, this book is a valuable resource for both practitioners and academics working in the field of nuclear instrumentation, control systems and other safety-critical systems, as well as nuclear power plant managers, public officials, and regulatory authorities.

Download or read book Nuclear Power Reactor Instrumentation Systems Handbook written by Joseph M. Harrer and published by . This book was released on 1973 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Instrument Engineers Handbook Volume 3 written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook – Volume 3: Process Software and Digital Networks, Fourth Edition is the latest addition to an enduring collection that industrial automation (AT) professionals often refer to as the "bible." First published in 1970, the entire handbook is approximately 5,000 pages, designed as standalone volumes that cover the measurement (Volume 1), control (Volume 2), and software (Volume 3) aspects of automation. This fourth edition of the third volume provides an in-depth, state-of-the-art review of control software packages used in plant optimization, control, maintenance, and safety. Each updated volume of this renowned reference requires about ten years to prepare, so revised installments have been issued every decade, taking into account the numerous developments that occur from one publication to the next. Assessing the rapid evolution of automation and optimization in control systems used in all types of industrial plants, this book details the wired/wireless communications and software used. This includes the ever-increasing number of applications for intelligent instruments, enhanced networks, Internet use, virtual private networks, and integration of control systems with the main networks used by management, all of which operate in a linked global environment. Topics covered include: Advances in new displays, which help operators to more quickly assess and respond to plant conditions Software and networks that help monitor, control, and optimize industrial processes, to determine the efficiency, energy consumption, and profitability of operations Strategies to counteract changes in market conditions and energy and raw material costs Techniques to fortify the safety of plant operations and the security of digital communications systems This volume explores why the holistic approach to integrating process and enterprise networks is convenient and efficient, despite associated problems involving cyber and local network security, energy conservation, and other issues. It shows how firewalls must separate the business (IT) and the operation (automation technology, or AT) domains to guarantee the safe function of all industrial plants. This book illustrates how these concerns must be addressed using effective technical solutions and proper management policies and practices. Reinforcing the fact that all industrial control systems are, in general, critically interdependent, this handbook provides a wide range of software application examples from industries including: automotive, mining, renewable energy, steel, dairy, pharmaceutical, mineral processing, oil, gas, electric power, utility, and nuclear power.

Download or read book Kokuritsu Kokkai Toshokan shoz kagaku gijutsu kankei bun kaigiroku mokuroku written by Kokuritsu Kokkai Toshokan (Japan) and published by . This book was released on 1997 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Verification and Validation of Software Related to Nuclear Power Plant Instrumentation and Control written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides practical guidance on the methods available for verification of the software and validation of computer based systems in nuclear power plants, and on how and when these methods can be effectively applied. It will be of particular interest to all those involved in the development, implementation, maintenance and use of software and computer based instrumentation and control systems in nuclear power plants.

Download or read book Proceedings of the International Topical Meeting on Safety of Operating Reactors San Francisco California October 11 14 1998 written by and published by . This book was released on 1998 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Title List of Documents Made Publicly Available written by and published by . This book was released on 1995 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.

Download or read book Human Factors in Practice written by Haydee M. Cuevas and published by CRC Press. This book was released on 2017-09-18 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Factors in Practice: Concepts and Applications is written for the practitioner who wishes to learn about human factors (HF) but is more interested in application (applied research) than theory (basic research). Each chapter discusses the application of important human factors theories, principles and concepts, presented at a level that can be easily understood by layman readers with no prior knowledge or formal education in human factors. The book illustrates to the non-HF practitioner the many varied domains in which human factors has been applied as well as serving to showcase current research in these areas. All chapters address the common overarching theme of applying human factors theories, principles and concepts to address real-world problems, and follow a similar structure to ensure consistency across chapters. Standard sections within each chapter include a discussion of the scientific underpinnings, a description of relevant HF methods and guidance on sources of further information, case studies to illustrate application, and a summary of likely future trends. Each chapter concludes with a short list of key terms and definitions to enhance the reader’s understanding of the content. Featuring specialist contributors from a variety of disciplines and cultural backgrounds, the book represents a diverse range of perspectives on human factors and will appeal to a broad international audience. It is consciously not a classroom textbook but rather intended to be read at the workplace by non-HF practitioners, and written specifically with their needs in mind. Reading this book will give all practitioners a solid grounding in modern human factors and its application in real-world situations.

Download or read book Fuzzy Systems and Soft Computing in Nuclear Engineering written by Da Ruan and published by Physica. This book was released on 2013-11-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy systems and soft computing are new computing techniques that are tolerant to imprecision, uncertainty and partial truths. Applications of these techniques in nuclear engineering present a tremendous challenge due to its strict nuclear safety regulation. The fields of nuclear engineering, fuzzy systems and soft computing have nevertheless matured considerably during the last decade. This book presents new application potentials for Fuzzy Systems and Soft Computing in Nuclear Engineering. The root of this book can be traced back to the series of the first, second and third international workshops on Fuzzy Logic and Intelligent Technologies in Nuclear Science (FUNS), which were successfully held in Mol, September 14-16, 1994 (FLINS'94), in Mol, September 25-27, 1996 (FLINS'96), and in Antwerp, September 14-16, 1998 (FLINS'98). The conferences were organised by the Belgian Nuclear Research Centre (SCKeCEN) and aimed at bringing together scientists, researchers, and engineers from academia and industry, at introducing the principles of fuzzy logic, neural networks, genetic algorithms and other soft computing methodologies, to the field of nuclear engineering, and at applying these techniques to complex problem solving within nuclear industry and related research fields. This book, as its title suggests, consists of nuclear engineering applications of fuzzy systems (Chapters 1-10) and soft computing (Chapters 11-21). Nine pertinent chapters are based on the extended version of papers at FLINS'98 and the other 12 chapters are original contributions with up-to-date coverage of fuzzy and soft computing applications by leading researchers written exclusively for this book.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding and Mitigating Ageing in Nuclear Power Plants written by Philip G Tipping and published by Elsevier. This book was released on 2010-10-26 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant life management (PLiM) is a methodology focussed on the safety-first management of nuclear power plants over their entire lifetime. It incorporates and builds upon the usual periodic safety reviews and licence renewals as part of an overall framework designed to assist plant operators and regulators in assessing the operating conditions of a nuclear power plant, and establishing the technical and economic requirements for safe, long-term operation.Understanding and mitigating ageing in nuclear power plants critically reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC), along with their relevant analysis and mitigation paths, as well as reactor-type specific PLiM practices. Obsolescence and other less obvious ageing-related aspects in nuclear power plant operation are also examined in depth.Part one introduces the reader to the role of nuclear power in the global energy mix, and the importance and relevance of plant life management for the safety regulation and economics of nuclear power plants. Key ageing degradation mechanisms and their effects in nuclear power plant systems, structures and components are reviewed in part two, along with routes taken to characterise and analyse the ageing of materials and to mitigate or eliminate ageing degradation effects. Part three reviews analysis, monitoring and modelling techniques applicable to the study of nuclear power plant materials, as well as the application of advanced systems, structures and components in nuclear power plants. Finally, Part IV reviews the particular ageing degradation issues, plant designs, and application of plant life management (PLiM) practices in a range of commercial nuclear reactor types.With its distinguished international team of contributors, Understanding and mitigating ageing in nuclear power plants is a standard reference for all nuclear plant designers, operators, and nuclear safety and materials professionals and researchers. - Introduces the reader to the role of nuclear power in the global energy mix - Reviews the fundamental ageing-degradation mechanisms of materials used in nuclear power plant structures, systems and components (SSC) - Examines topics including elimination of ageing effects, plant design, and the application of plant life management (PLiM) practices in a range of commercial nuclear reactor types

Download or read book INIS Atomindex written by and published by . This book was released on 1996 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: