Download or read book Novel Research about Biomechanics and Biomaterials Used in Hip Knee and Related Joints written by J. Philippe Kretzer and published by MDPI. This book was released on 2021-08-18 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joint replacement is a very successful medical treatment. However, the survivorship of hip, knee, shoulder, and other implants is limited. The degradation of materials and the immune response against degradation products or an altered tissue loading condition as well as infections remain key factors of their failure. Current research in biomechanics and biomaterials is trying to overcome these existing limitations. This includes new implant designs and materials, bearings concepts and tribology, kinematical concepts, surgical techniques, and anti-inflammatory and infection prevention strategies. A careful evaluation of new materials and concepts is required in order to fully assess the strengths and weaknesses and to improve the quality and outcomes of joint replacements. Therefore, extensive research and clinical trials are essential. The main aspects that are addressed in this Special Issue are related to new material, design and manufacturing considerations of implants, implant wear and its potential clinical consequence, implant fixation, infection-related material aspects, and taper-related research topics. This Special Issue gives an overview of the ongoing research in those fields. The contributions were solicited from researchers working in the fields of biomechanics, biomaterials, and bio- and tissue-engineering.
Download or read book Joint Replacement Technology written by Peter A. Revell and published by Woodhead Publishing. This book was released on 2021-07-28 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Joint Replacement Technology provides a thoroughly updated review of recent developments in joint replacement technology. Joint replacement is a standard treatment for joint degradation and has improved the quality of life of millions of patients. Collaboration between clinicians and researchers is critical to its continued success and to meet the rising expectations of patients and surgeons.This edition covers a range of updated and new content, ranging from chapters on materials analysis and selection, to methodologies and techniques used for joint replacement and clinical challenges of replacing specific joints. Key topics include tribological considerations and experiments; challenges in joint bearing surfaces; cementless fixation techniques; healing responses to implants. Clinical challenges and perspectives are covered with the aid of case studies.Thanks to its widespread collaboration and international contributors, Joint Replacement Technology, Third Edition is useful for materials scientists and engineers in both academia and the biomedical industry. Chemists, clinicians, and other researchers in this area will also find this text invaluable. - This third edition provides an updated comprehensive review of recent developments in joint replacement technology - Reviews a range of specific joints, biological and mechanical issues and fixation techniques - Includes revised and new content, such as sections on regulatory affairs, AI techniques and 3D printing
Download or read book Novel Research about Biomechanics and Biomaterials Used in Hip Knee and Related Joints written by J. Philippe Kretzer and published by . This book was released on 2021 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joint replacement is a very successful medical treatment. However, the survivorship of hip, knee, shoulder, and other implants is limited. The degradation of materials and the immune response against degradation products or an altered tissue loading condition as well as infections remain key factors of their failure. Current research in biomechanics and biomaterials is trying to overcome these existing limitations. This includes new implant designs and materials, bearings concepts and tribology, kinematical concepts, surgical techniques, and anti-inflammatory and infection prevention strategies. A careful evaluation of new materials and concepts is required in order to fully assess the strengths and weaknesses and to improve the quality and outcomes of joint replacements. Therefore, extensive research and clinical trials are essential. The main aspects that are addressed in this Special Issue are related to new material, design and manufacturing considerations of implants, implant wear and its potential clinical consequence, implant fixation, infection-related material aspects, and taper-related research topics. This Special Issue gives an overview of the ongoing research in those fields. The contributions were solicited from researchers working in the fields of biomechanics, biomaterials, and bio- and tissue-engineering.
Download or read book Personalized Hip and Knee Joint Replacement written by Charles Rivière and published by Springer Nature. This book was released on 2020-06-30 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book describes and illustrates the surgical techniques, implants, and technologies used for the purpose of personalized implantation of hip and knee components. This new and flourishing treatment philosophy offers important benefits over conventional systematic techniques, including component positioning appropriate to individual anatomy, improved surgical reproducibility and prosthetic performance, and a reduction in complications. The techniques described in the book aim to reproduce patients’ native anatomy and physiological joint laxity, thereby improving the prosthetic hip/knee kinematics and functional outcomes in the quest of the forgotten joint. They include kinematically aligned total knee/total hip arthroplasty, partial knee replacement, and hip resurfacing. The relevance of available and emerging technological tools for these personalized approaches is also explained, with coverage of, for example, robotics, computer-assisted surgery, and augmented reality. Contributions from surgeons who are considered world leaders in diverse fields of this novel surgical philosophy make this open access book will invaluable to a wide readership, from trainees at all levels to consultants practicing lower limb surgery
Download or read book Hip Biomechanics written by Shinichi Imura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the arranged monograph based on the Hip Biomechanics Symposium held on November 1992 in Fukui, Japan. It consists of six major sections: loading, gait analysis, total hip arthroplasty, osteotomies, motion analysis, and stem designs for stability. The most important aim of the volume is to overview the current research outcomes in the biomechanical approaches to adult hip diseases. Each of these sections brings together many of the leading researchers in this field. The information found here will be of benefit to orthopedic surgeons and researchers in the related areas.
Download or read book Computational Biomechanics of the Hip Joint written by Mohammed Rafiq Abdul Kadir and published by Springer Science & Business Media. This book was released on 2013-09-19 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents analyses of the most commonly reported failure modes of hip stems: loosening and thigh pain; both are attributed to the relative motion and instability at the bone-implant interface due to failure to achieve sufficient primary fixation. The book investigates various factors that could affect primary stability and therefore the long-term outcome of hip arthroplasty. The results complement experimental work carried out in this area as in-vitro experiments have several limitations that could be addressed through computer simulations.
Download or read book Advanced Biomaterials for Orthopaedic Application written by Saverio Affatato and published by . This book was released on 2020 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of topics in the orthopaedic fields and can be used as a textbook for the final undergraduate engineering course or as a topic on tribology at the postgraduate level. This book can serve as a useful reference for academics, tribology, and materials researchers; mechanical, materials, and physics engineers; biomedical scientists and professionals in tribology; and related industries. The scientific interest in this book will be evident for many important centres of research, including laboratories and universities throughout the world.
Download or read book Advances in Artificial Hip and Knee Joint Technology written by M. Schaldach and published by Springer. This book was released on 1976 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bone Repair Biomaterials written by Kendell Pawelec and published by Woodhead Publishing. This book was released on 2018-11-29 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bone Repair Biomaterials: Regeneration and Clinical Applications, Second Edition, provides comprehensive reviews on materials science, engineering principles and recent advances. Sections review the fundamentals of bone repair and regeneration, discuss the science and properties of biomaterials used for bone repair, including metals, ceramics, polymers and composites, and discuss clinical applications and considerations, with chapters on such topics as orthopedic surgery, tissue engineering, implant retrieval, and ethics of bone repair biomaterials. This second edition includes more chapters on relevant biomaterials and a greatly expanded section on clinical applications, including bone repair applications in dental surgery, spinal surgery, and maxilo-facial and skull surgery. In addition, the book features coverage of long-term performance and failure of orthopedic devices. It will be an invaluable resource for researchers, scientists and clinicians concerned with the repair and restoration of bone. - Provides a comprehensive review of the materials science, engineering principles and recent advances in this important area - Presents new chapters on Surface coating of titanium, using bone repair materials in dental, spinal and maxilo-facial and skull surgery, and advanced manufacturing/3D printing - Reviews the fundamentals of bone repair and regeneration, addressing social, economic and clinical challenges - Examines the properties of biomaterials used for bone repair, with specific chapters assessing metals, ceramics, polymers and composites
Download or read book UHMWPE Biomaterials Handbook written by Steven M. Kurtz and published by Academic Press. This book was released on 2009-04-27 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: UHMWPE Biomaterials Handbook describes the science, development, properties and application of of ultra-high molecular weight polyethylene (UHMWPE) used in artificial joints. This material is currently used in 1.4 million patients around the world every year for use in the hip, knee, upper extremities, and spine. Since the publication of the 1st edition there have been major advances in the development and clinical adoption of highly crosslinked UHMWPE for hip and knee replacement. There has also been a major international effort to introduce Vitamin E stabilized UHMWPE for patients. The accumulated knowledge on these two classes of materials are a key feature of the 2nd edition, along with an additional 19 additional chapters providing coverage of the key engineering aspects (biomechanical and materials science) and clinical/biological performance of UHMWPE, providing a more complete reference for industrial and academic materials specialists, and for surgeons and clinicians who require an understanding of the biomaterials properties of UHMWPE to work successfully on patient applications. - The UHMWPE Handbook is the comprehensive reference for professionals, researchers, and clinicians working with biomaterials technologies for joint replacement - New to this edition: 19 new chapters keep readers up to date with this fast moving topic, including a new section on UHMWPE biomaterials; highly crosslinked UHMWPE for hip and knee replacement; Vitamin E stabilized UHMWPE for patients; clinical performance, tribology an biologic interaction of UHMWPE - State-of-the-art coverage of UHMWPE technology, orthopedic applications, biomaterial characterisation and engineering aspects from recognised leaders in the field
Download or read book Lower Extremity Joint Preservation written by Mats Brittberg and published by Springer Nature. This book was released on 2020-12-19 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and discusses the available joint preservation techniques for maintaining the stability homeostasis of the lower extremity joints – specifically the hip, knee, and ankle – following injury. Readers will find detailed coverage of anatomy, pathology, techniques for repair, restoration, and regeneration, and rehabilitation strategies. Joint preservation is an emerging field in Orthopaedics that represents a response to the limitations of joint replacement technology. Using the techniques now available, surgeons can try to prevent or delay the onset of osteoarthritis or other degenerative conditions affecting the joints, particularly in young patients. Furthermore, modern tissue engineering offers the potential for whole-joint resurfacing, thereby achieving complete restoration. Optimal implementation of these techniques depends upon further refinement of methods and continuing improvements in knowledge of biomechanics, biology, and anatomy. Against this background, the present book is an ideal guide to the latest treatment modalities that will appeal to all who wish to learn more about indications, goals, procedures, and expected outcomes.
Download or read book Orthopaedic Biomechanics written by Beth A. Winkelstein and published by CRC Press. This book was released on 2012-12-18 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the strong current attention of orthopaedic, biomechanical, and biomedical engineering research on translational capabilities for the diagnosis, prevention, and treatment of clinical disease states, the need for reviews of the state-of-art and current needs in orthopaedics is very timely. Orthopaedic Biomechanics provides an in-depth review o
Download or read book Advances in Small Animal Total Joint Replacement written by Jeffrey N. Peck and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Small Animal Total Joint Replacement provides an up-to-date, comprehensive examination of joint replacement in veterinary surgery. Part of the Advances in Veterinary Surgery series copublished with the ACVS Foundation, the book presents an evidence-based, multi-system examination of the current state of hip, knee, and elbow replacement in dogs and cats, including information on biomechanics and biomaterials not found in other sources. Written by an international group of experts, the book offers guidance on the history, indications, contraindications, clinical procedures, and a review of the current literature for these surgical techniques. Focusing on replacement of the hip, knee, and elbow, the book also covers disc, shoulder, carpus, and tarsus replacement, as well as information on the development of custom prostheses. Each section incorporates information on potential complications and outcomes assessment. Advances in Small Animal Total Joint Replacement is an unparalleled repository of information for veterinary surgeons, residents, and practitioners with an interest in these procedures.
Download or read book Endoprosthetics written by E. Morscher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern endoprosthetics requires the examination of basic principles such as metallurgy, tribology, gait analysis, model and system development, methods of implant fixation, design, surface problems, material characteristics, stability behaviour, and operating techniques. With a background of more than 30 years of experience, this work presents a summary of these fields, providing the reader with the current state of knowledge. It is dedicated to Dr. med. h.c. Otto Frey-Zünd who, in conjunction with orthopaedic surgeons, scientists and engineers from all over Europe, developed artificial joints for hips, knees, elbows and wrists in over 30 years of pioneering work.
Download or read book Computational Biomechanics of the Musculoskeletal System written by Ming Zhang and published by CRC Press. This book was released on 2014-09-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational biomechanics is an emerging research field that seeks to understand the complex biomechanical behaviors of normal and pathological human joints to come up with new methods of orthopedic treatment and rehabilitation. Computational Biomechanics of the Musculoskeletal System collects the latest research and cutting-edge techniques used in computational biomechanics, focusing on orthopedic and rehabilitation engineering applications. The book covers state-of-the-art techniques and the latest research related to computational biomechanics, in particular finite element analysis and its potential applications in orthopedics and rehabilitation engineering. It offers a glimpse into the exciting potentials for computational modeling in medical research and biomechanical simulation. The book is organized according to anatomical location—foot and ankle, knee, hip, spine, and head and teeth. Each chapter details the scientific questions/medical problems addressed by modeling, basic anatomy of the body part, computational model development and techniques used, related experimental studies for model setup and validation, and clinical applications. Plenty of useful biomechanical information is provided for a variety of applications, especially for the optimal design of body support devices and prosthetic implants. This book is an excellent resource for engineering students and young researchers in bioengineering. Clinicians involved in orthopedics and rehabilitation engineering may find this work to be both informative and highly relevant to their clinical practice.
Download or read book The Hip Joint written by K. Mohan Iyer and published by CRC Press. This book was released on 2021-11-10 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hip Joint, written in 2016, provides a detailed account of the hip joint's anatomy and biomechanics and covers recent trends in orthopaedic surgery of the hip joint, including the latest advances in revision total hip arthroplasty (THA), computer-assisted navigation for THA, resurfacing of the hip joint and neoplastic conditions around the hip as well as indications, complications and outcomes of hip arthroscopy. Another book, The Hip Joint in Adults: Advances and Developments, gives additional important details of how hip joint surgery has evolved around the world. While much of the basic knowledge in this area is constant, it is critically important to stay current on those areas that do change. This updated second edition of The Hip Joint contains a host of original articles from contributory authors all around the world, showing the evolution of the hip joint till the present day, building upon the solid foundation set by the first edition. It covers hot topics such as 3D printing in orthopaedics and traumatology, stem cell therapy in orthopaedics, hip resurfacing, hip-preserving surgery, sports medicine for the hip joint, robotic-assisted surgery in orthopaedics and neoplastic conditions around the hip.
Download or read book Frontiers in Orthopaedic Biomechanics written by Cheng-Kung Cheng and published by Springer Nature. This book was released on 2020-04-30 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art and up-to-date discussions on the pathology-related considerations and implications in the field of orthopaedic biomechanics. It presents fundamental engineering and mechanical theories concerning the biomechanics of orthopaedic and anatomical structures, and explores the biological and mechanical features that influence or modify the biomechanics of these structures. It also addresses clinically relevant biomechanical issues with a focus on diagnosis, injury, prevention and treatment. The first 12 chapters of the book provide a detailed review of the principles of orthopaedic biomechanics in the musculoskeletal system, including cartilage, bone, muscles and tendon, ligament, and multiple joints. Each chapter also covers important biomechanical concepts relevant to surgical and clinical practice. The remaining chapters examines clinically relevant trauma and injury challenges in the field, including diagnostic techniques such as movement analysis and rehabilitation intervention. Lastly it describes advanced considerations and approaches for fracture fixation, implant design, and biomaterials.
