Download or read book Novel Fouling Reducing Coatings for Ultrafiltration Nanofiltration and Reverse Osmosis Membranes written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric membranes could potentially be the most flexible and viable long-term strategy for treatment of produced water from oil and gas production. However, widespread use of membranes, including reverse osmosis (RO) membranes, for produced water purification is hindered due to fouling caused by the impurities present in the water. Fouling of RO membranes is likely caused by surface properties including roughness, hydrophilicity, and charge, so surface modification is the most widely considered approach to improve the fouling properties of current RO membranes. This project focuses on two main approaches to surface modification: coating and grafting. Hydrophilic coating and grafting materials based on poly(ethylene glycol) (PEG) are applied to commercial RO membranes manufactured by Dow FilmTec and GE. Crossflow filtration experiments are used to determine the fouling resistance of modified membranes, and compare their performance to that of unmodified commercial RO membranes. Grafting and coating are shown to be two alternative methods of producing modified membranes with improved fouling resistance.

Download or read book Novel Nonporous Fouling Resistant Composite Nanofiltration Membrane and Membrane Separation Systems for Wastewater Treatment Important for CPSON5 PPSON1 Minimization of Oily and Non Oily Wastewater written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Navy ships generate large volumes of wastewater (about 20-70 gal/day of water per crew member) which, to meet new regulations, require treatment prior to overboard discharge. In the past, all wastewater was simply discharged overboard. More recently, regulating bodies such as MARPOL, the EPA, the U.S. Coast Guard, and some states have enacted restrictions on the location and extent of such discharges. Polymeric nanofiltration/ultrafiltration membranes able to produce dischargeable water have already been considered for shipboard wastewater treatment. The problem with this approach is fouling of the membrane by a layer of colloidal and particulate material that forms a secondary barrier to flow through the membrane. To overcome the problems of membrane fouling and the need for periodic cleaning, NC State University (NCSU) and Membrane Technology and Research, Inc. (MTR) have developed a new type of composite membrane in which a thin, highly water-permeable polymer coating layer is used to completely eliminate internal membrane fouling and significantly reduce the effect of surface fouling.

Download or read book Novel Surface Modifications and Materials for Fouling Resistant Water Purification Membranes written by Bryan David McCloskey and published by . This book was released on 2009 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major challenge facing widespread implementation of membrane-based water purification is fouling, which results in increased operating costs and reduced membrane lifetime. This thesis focuses on various methods, including novel membrane surface modifications and polymers that resist degradation when exposed to oxidizing agents used as disinfectants, to alleviate membrane fouling. Fouling-resistant ultrafiltration membrane coatings were prepared from poly(ethylene glycol) diglycidyl ether-crosslinked chitosan (chi-PEG hybrid). Composite membranes were prepared for oil-water emulsion filtration by coating the most promising chi-PEG hybrid onto a polysulfone ultrafiltration membrane. Optimization of the coating layer thickness led to composite membranes that exhibited water flux values more than 5 times higher than that of uncoated membranes after one day of oily-water crossflow filtration. The organic rejection of the coated membranes was also higher than that of the uncoated polysulfone membranes. Polydopamine (PDOPA) deposition was discovered to reduce fouling in water purification membranes. PDOPA was found to deposit from solution onto virtually any surface. When deposited on water purification membranes, PDOPA rendered the membrane more hydrophilic and less susceptible to fouling. Moreover, covalent binding of other molecules, such as amine-terminated poly (ethylene glycol) (PEG), to PDOPA is simple and performed using benign chemicals and conditions. Commercially-available polymeric membranes were modified with polydopamine, and all showed improved fouling resistance while filtering oil-water emulsions. To demonstrate the versatility and ease of PDOPA modification scalability, PDOPA was deposited on entire membrane modules, and the resulting modified module exhibited improved fouling resistance. Finally, high ion rejection, chlorine-tolerant sulfonated polysulfone thin-film composite membranes were prepared and characterized. Interestingly, freestanding thick sulfonated poly(arylene ether sulfone) (BPS) films exhibit nearly neutral electrostatic charge, even though sulfonation introduces fixed negative charge into the polymer structure. As a result, charge exclusion ion partitioning is not a dominant rejection mechanism in these films. However, composite membranes prepared from a BPS coating layer and a porous Udel polysulfone support exhibit a negatively charged surface and, presumably, charge exclusion would be a more important partitioning mechanism for these membranes. Therefore, thick BPS films do not exhibit certain drawbacks, such as reduced salt rejection of mixed-valence feeds, that are observed in BPS thin-film composite membranes.

Download or read book Polymeric Membranes for Water Purification and Gas Separation written by Rasel Das and published by Materials Research Forum LLC. This book was released on 2021-11-25 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various organic and synthetic polymers are important materials for the removal of organic and inorganic pollutants from wastewater and the separation of gases. The book discusses various types of membranes for microfiltration, ultrafiltration, nanofiltration, reverse osmosis, forward osmosis etc. A number of nanomaterials are available for the modification of polymeric membranes. Keywords: Polymeric Membrane, Water Purification, Water Softening, Water Desalination, Gas Separation, Osmosis Membranes, Microfiltration, Ultrafiltration, Nanofiltration, Carbon Nanotube, Nanosheets, MOFs, Porous Organic Cages, Titanium Dioxide, Zinc Oxide, Mesoporous Silica Nanoparticles, O2/N2 Separation, CO2/CH4 Separation, H2/N2 Separation.

Download or read book Nanofiltration Membrane for Water Purification written by Akil Ahmad and published by Springer Nature. This book was released on 2023-02-04 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basic and sustainable approach of nanofiltration membrane techniques along with their fabrication, characterization, separation mechanisms, and broad applications in the field of wastewater treatment. It provides a wide knowledge of nanofiltration technique to water purification audience concerning the recent development with various illustrations, methods and results for graduate students, scientists, academicians, researchers, and industrialists. Readers from wastewater and water purification will have a quick reference by exploring the research literature on the subject field with commercial value-added research applications of nanofiltration membrane.

Download or read book Comprehensive Membrane Science and Engineering written by Enrico Drioli and published by Elsevier. This book was released on 2017-07-20 with total page 1709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Membrane Science and Engineering, Second Edition, Four Volume Set is an interdisciplinary and innovative reference work on membrane science and technology. Written by leading researchers and industry professionals from a range of backgrounds, chapters elaborate on recent and future developments in the field of membrane science and explore how the field has advanced since the previous edition published in 2010. Chapters are written by academics and practitioners across a variety of fields, including chemistry, chemical engineering, material science, physics, biology and food science. Each volume covers a wide spectrum of applications and advanced technologies, such as new membrane materials (e.g. thermally rearranged polymers, polymers of intrinsic microporosity and new hydrophobic fluoropolymer) and processes (e.g. reverse electrodialysis, membrane contractors, membrane crystallization, membrane condenser, membrane dryers and membrane emulsifiers) that have only recently proved their full potential for industrial application. This work covers the latest advances in membrane science, linking fundamental research with real-life practical applications using specially selected case studies of medium and large-scale membrane operations to demonstrate successes and failures with a look to future developments in the field. Contains comprehensive, cutting-edge coverage, helping readers understand the latest theory Offers readers a variety of perspectives on how membrane science and engineering research can be best applied in practice across a range of industries Provides the theory behind the limits, advantages, future developments and failure expectations of local membrane operations in emerging countries

Download or read book 3D Printing Assisted Modification of Ultrafiltration Membranes Towards Novel Patterned Anti fouling Coatings written by Nathaniel Wardrip and published by . This book was released on 2015 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Membrane Separations written by Anil K. Pabby and published by CRC Press. This book was released on 2023-12-22 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Handbook of Membrane Separations: Chemical, Pharmaceutical, Food, and Biotechnological Applications provides a comprehensive discussion of membrane applications. Fully updated to include the latest advancements in membrane science and technology, it is a one-of-its-kind overview of the existing literature. This fully illustrated handbook is written by experts and professionals in membrane applications from around the world. Key Features: • Includes entirely new chapters on organic solvent-resistant nanofiltration, membrane condensers, membrane-reactors in hydrogen production, membrane materials for haemodialysis, and integrated membrane distillation • Covers the full spectrum of membrane technology and its advancements • Explores membrane applications in a range of fields, from biotechnological and food processing to industrial waste management and environmental engineering This book will appeal to both newcomers to membrane science as well as engineers and scientists looking to expand their knowledge on upcoming advancements in the field.

Download or read book Nanofiltration 2 Volume Set written by Andrea Iris Schäfer and published by John Wiley & Sons. This book was released on 2021-08-09 with total page 1267 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated guide to the growing field of nanofiltration including fundamental principles, important industrial applications as well as novel materials With contributions from an international panel of experts, the revised second edition of Nanofiltration contains a comprehensive overview of this growing field. The book covers the basic principles of nanofiltration including the design and characterizations of nanofiltration membranes. The expert contributors highlight the broad ranges of industrial applications including water treatment, food, pulp and paper, and textiles. The book explores photocatalytic nanofiltration reactors, organic solvent nanofiltration, as well as nanofiltration in metal and acid recovery. In addition, information on the most recent developments in the field are examined including nanofiltration retentate treatment and renewable energy-powered nanofiltration. The authors also consider the future of nanofiltration materials such as carbon- as well as polymer-based materials. This important book: Explores the fast growing field of the membrane process of nanofiltration Examines the rapidly expanding industrial sector's use of membranes for water purification Covers the most important industrial applications with a strong focus on water treatment Contains a section on new membrane materials, including carbon-based and polymer-based materials, as well as information on artificial ion and water channels as biomimetic membranes Written for scientists and engineers in the fields of chemistry, environment, food and materials, the second edition of Nanofiltration provides a comprehensive overview of the field, outlines the principles of the technology, explores the industrial applications, and discusses new materials.

Download or read book Nanofiltration written by Andrea Iris Schäfer and published by John Wiley & Sons. This book was released on 2021-07-07 with total page 1267 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated guide to the growing field of nanofiltration including fundamental principles, important industrial applications as well as novel materials With contributions from an international panel of experts, the revised second edition of Nanofiltration contains a comprehensive overview of this growing field. The book covers the basic principles of nanofiltration including the design and characterizations of nanofiltration membranes. The expert contributors highlight the broad ranges of industrial applications including water treatment, food, pulp and paper, and textiles. The book explores photocatalytic nanofiltration reactors, organic solvent nanofiltration, as well as nanofiltration in metal and acid recovery. In addition, information on the most recent developments in the field are examined including nanofiltration retentate treatment and renewable energy-powered nanofiltration. The authors also consider the future of nanofiltration materials such as carbon- as well as polymer-based materials. This important book: Explores the fast growing field of the membrane process of nanofiltration Examines the rapidly expanding industrial sector's use of membranes for water purification Covers the most important industrial applications with a strong focus on water treatment Contains a section on new membrane materials, including carbon-based and polymer-based materials, as well as information on artificial ion and water channels as biomimetic membranes Written for scientists and engineers in the fields of chemistry, environment, food and materials, the second edition of Nanofiltration provides a comprehensive overview of the field, outlines the principles of the technology, explores the industrial applications, and discusses new materials.

Download or read book Ultrafiltration Membranes and Applications written by Anthony R. Cooper and published by Springer. This book was released on 1980 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Modification of Water Purification Membranes to Improve Fouling Resistance in Oily Water Filtration written by Sirirat Kasemset and published by . This book was released on 2015 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the biggest challenges in using water purification membranes is fouling. Surface modification using hydrophilic materials can reduce hydrophobic interactions between membrane surface and hydrophobic foulants, thereby alleviating fouling. In this Ph.D. research, polydopamine (PDA), a highly hydrophilic and universal coating agent, was used to surface-modified reverse osmosis (RO) and ultrafiltration (UF) membranes. PDA modification conditions (e.g., dopamine coating solution concentration, coating time, and pH of coating solution) control PDA deposition and can directly influence the modified membrane properties. Thus, the influence of PDA modification conditions on membrane physical, permeation, selective, and fouling properties were investigated systematically. A fundamental understanding relating the physical and permeation properties and the fouling characteristics of PDA-modified membranes was established. The RO membranes were modified with PDA at various modification conditions. Permeate fluxes during pure water and oil/water emulsion filtrations were studied. The PDA modification increased the permeate fluxes during oil/water emulsion filtration (thus, improved membrane fouling resistance) relative to unmodified membranes regardless of the initial dopamine concentration or deposition time used. However, these changes were only observed for the membranes coated under alkaline conditions, suggesting that the PDA did not deposit well under acidic condition. For UF membranes, molecular weight cutoff (MWCO) and pure water permeance decreased with increasing initial dopamine concentration or deposition time. A permeability and selectivity tradeoff was also observed. Membrane mean pore size and pore size distribution (modeled using log-normal pore size distribution) were investigated via modelling using a hindered solute transport model, Hagen-Poiseuille equation, and a stagnant film model. The PDA modification increased UF membrane surface hydrophilicity regardless of the coating conditions used, but it did not clearly change surface roughness or zeta potential (i.e., surface charge). Membrane fouling propensity was characterized using threshold flux. Compared to unmodified membranes, the threshold flux increased at minimal PDA coatings, but decreased at excessive PDA coatings. These threshold flux changes were likely governed by a tradeoff between surface hydrophilicity increase and pure water permeance decrease. Excessive PDA coatings resulted in decreased pure water permeance and possibly, pore blockage and pore size reduction, leading to higher local permeate flux causing severe fouling and decreased threshold flux.

Download or read book Characterisation and Prediction of Crystallisation Fouling in Reverse Osmosis and Nanofiltration Membrane Processes written by Emad Yousef Mahmoud Alhseinat and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Membrane Separations Technology written by R.D. Noble and published by Elsevier. This book was released on 1995-01-17 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of membrane separation technology is presently in a state of rapid growth and innovation. Many different membrane separation processes have been developed during the past half century and new processes are constantly emerging from academic, industrial, and governmental laboratories. While new membrane separation processes are being conceived with remarkable frequency, existing processes are also being constantly improved in order to enhance their economic competitiveness. Significant improvements are currently being made in many aspects of membrane separation technology: in the development of new membrane materials with higher selectivity and/or permeability, in the fabrication methods for high-flux asymmetric or composite membranes, in membrane module construction and in process design. Membrane separation technology is presently being used in an impressive variety of applications and has generated businesses totalling over one billion U.S. dollars annually.The main objective of this book is to present the principles and applications of a variety of membrane separation processes from the unique perspectives of investigators who have made important contributions to their fields. Another objective is to provide the reader with an authoritative resource on various aspects of this rapidly growing technology. The text can be used by someone who wishes to learn about a general area of application as well as by the knowledgeable person seeking more detailed information.

Download or read book Nanotechnology for Water Treatment and Purification written by Anming Hu and published by Springer. This book was released on 2014-07-04 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest progress in the application of nanotechnology for water treatment and purification. Leaders in the field present both the fundamental science and a comprehensive overview of the diverse range of tools and technologies that have been developed in this critical area. Expert chapters present the unique physicochemical and surface properties of nanoparticles and the advantages that these provide for engineering applications that ensure a supply of safe drinking water for our growing population. Application areas include generating fresh water from seawater, preventing contamination of the environment and creating effective and efficient methods for remediation of polluted waters. The chapter authors are leading world-wide experts in the field with either academic or industrial experience, ensuring that this comprehensive volume presents the state-of-the-art in the integration of nanotechnology with water treatment and purification.

Download or read book Nanofiltration Principles and Applications written by Anthony Gordon Fane and published by . This book was released on 2004-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofiltration processes are finding wide applications in several 'wet' industries, such as water/wastewater treatment, water re-use, textile industry, diary industry, food industry and the pulp and paper industries. Despite this, no definitive book exists which covers the principles of the techniques and their potential and actual applications. ' Nanofiltration: Principles and Applications ' is edited by three well-known specialists from Australia, and contains chapters from top international authorities. The result is a comprehensive and up to date account which will be essential reading for membrane designers, manufacturers and end-users worldwide. *Hot industrial topic *Best Australian Editors and international contributors *The only book on the topic

Download or read book Design of Advanced Reverse Osmosis and Nanofiltration Membranes for Water Purification written by Chaoyi Ba and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Most commercially available reverse osmosis (RO) and nanofiltration (NF) membranes are based on the thin film composite (TFC) aromatic polyamide membranes. However, they have several disadvantages including low resistance to fouling, low chemical and thermal stabilities and limited chlorine tolerance. To address these problems, advanced RO/NF membranes are being developed from polyimides for water and wastewater treatments. The following three projects have resulted from my research. (1) Positively charged and solvent resistant NF membranes. The use of solvent resistant membranes to facilitate small molecule separations has been a long standing industry goal of the chemical and pharmaceutical industries. We developed a solvent resistant membrane by chemically cross-linking of polyimide membrane using polyethylenimine. This membrane showed excellent stability in almost all organic solvents. In addition, this membrane was positively charged due to the amine groups remaining on the surface. As a result, high efficiency (> 95%) and selectivity for multivalent heavy metal removal was achieved. (2) Fouling resistant NF membranes. Antifouling membranes are highly desired for 0́−all0́+ applications because fouling will lead to higher energy demand, increase of cleaning and corresponding down time and reduced life-time of the membrane elements. For fouling prevention, we designed a new membrane system using a coating technique to modify membrane surface properties to avoid adsorption of foulants like humic acid. A layer of water-soluble polymer such as polyvinyl alcohol (PVA), polyacrylic acid (PAA), polyvinyl sulfate (PVS) or sulfonated poly(ether ether ketone) (SPEEK), was adsorbed onto the surface of a positively charged membrane. The resultant membranes have a smooth and almost neutrally charged surface which showed better fouling resistance than both the positively charged NF membranes and commercially available negatively charged NTR-7450 membrane. In addition, these membranes showed high efficiency for removal of multivalent ions (> 95% for both cations and anions). Therefore, these antifouling surfaces can be potentially used for water softening, water desalination and wastewater treatment in a membrane bioreactor (MBR) process. (3) Thermally stable RO membranes. Commercial RO membranes cannot be used at temperature higher than 45°C due to the use of polysulfone substrate, which often limits their applications in industries. We successfully developed polyimides as the membrane substrate for thermally stable RO membranes due to their high thermal resistance. The polyimide-based composite polyamide membranes showed desalination performance comparable to the commercial TFC membrane. However, the key advantage of the polyimide-based membrane is its high thermal stability. As the feed temperature increased from 25oC to 95oC, the water flux increased 5 - 6 times while the salt rejection almost kept constant. This membrane appears to provide a unique solution for hot water desalination and also a feasible way to improve the water productivity by increasing the operating temperature without any drop in salt rejection.