Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Failure of Materials and Structures written by Arun Shukla and published by Springer. This book was released on 2014-09-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Failure of Materials and Structures discusses the topic of dynamic loadings and their effect on material and structural failure. Since dynamic loading problems are very difficult as compared to their static counterpart, very little information is currently available about dynamic behavior of materials and structures. Topics covered include the response of both metallic as well as polymeric composite materials to blast loading and shock loadings, impact loadings and failure of novel materials under more controlled dynamic loads. These include response of soft materials that are important in practical use but have very limited information available on their dynamic response. Dynamic fragmentation, which has re-emerged in recent years has also been included. Both experimental as well as numerical aspects of material and structural response to dynamic loads are discussed. Written by several key experts in the field, Dynamic Failure of Materials and Structures will appeal to graduate students and researchers studying dynamic loadings within mechanical and civil engineering, as well as in physics and materials science.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hygrothermoelasticity written by George C. Sih and published by Springer Science & Business Media. This book was released on 1986-09-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains results of more than a decade's effort on coupled deformation and diffusion obtained in research performed at the Institute of Fracture and Solid Mechanics, Lehigh University. Despite the overwhelming number of theories on this subject, little is known on the assessment of coupling effects because of the inherent difficulties associated with experimentation. A case in point is couple thermoelasticity, a theory that has remained virtually unused in practice. This is indicative of the inadequacy of conventional approaches. The interdependence of heat, moisture and deformation arises in many engineer ing problems of practical interest. Whether these effects are coupled or not depend on the transient character of the boundary conditions. Special attention is given to finding the coupling constants. Invoked is the assumption that the physical parameters should be independent of the specified boundary conditions. They can thus be extracted from known experimental data for situations where coupling effects are relatively weak and then applied to predict strong coupling effects as boundary conditions are altered. This is illustrated for the T300/5208 material commonly used in composites and permits a more reliable evaluation of material behaving under extreme environmental conditions. The lack of this knowledge can often be a major deterrent to the achievement of new technological advances. The reader will recognize that the material in this book does not follow the main stream of research on moisture-temperature diffusion and deformation.

Download or read book An Introduction to Meshfree Methods and Their Programming written by G.R. Liu and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite difference method (FDM) hasbeen used tosolve differential equation systems for centuries. The FDM works well for problems of simple geometry and was widely used before the invention of the much more efficient, robust finite element method (FEM). FEM is now widely used in handling problems with complex geometry. Currently, we are using and developing even more powerful numerical techniques aiming to obtain more accurate approximate solutions in a more convenient manner for even more complex systems. The meshfree or meshless method is one such phenomenal development in the past decade, and is the subject of this book. There are many MFree methods proposed so far for different applications. Currently, three monographs on MFree methods have been published. Mesh Free Methods, Moving Beyond the Finite Element Method d by GR Liu (2002) provides a systematic discussion on basic theories, fundamentals for MFree methods, especially on MFree weak-form methods. It provides a comprehensive record of well-known MFree methods and the wide coverage of applications of MFree methods to problems of solids mechanics (solids, beams, plates, shells, etc.) as well as fluid mechanics. The Meshless Local Petrov-Galerkin (MLPG) Method d by Atluri and Shen (2002) provides detailed discussions of the meshfree local Petrov-Galerkin (MLPG) method and itsvariations. Formulations and applications of MLPG are well addressed in their book.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1994 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Finite Elements for Continua and Structures written by Ted Belytschko and published by John Wiley & Sons. This book was released on 2014-01-07 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Elements for Continua and Structures p>Nonlinear Finite Elements for Continua and Structures This updated and expanded edition of the bestselling textbook provides a comprehensive introduction to the methods and theory of nonlinear finite element analysis. New material provides a concise introduction to some of the cutting-edge methods that have evolved in recent years in the field of nonlinear finite element modeling, and includes the eXtended Finite Element Method (XFEM), multiresolution continuum theory for multiscale microstructures, and dislocation- density-based crystalline plasticity. Nonlinear Finite Elements for Continua and Structures, Second Edition focuses on the formulation and solution of discrete equations for various classes of problems that are of principal interest in applications to solid and structural mechanics. Topics covered include the discretization by finite elements of continua in one dimension and in multi-dimensions; the formulation of constitutive equations for nonlinear materials and large deformations; procedures for the solution of the discrete equations, including considerations of both numerical and multiscale physical instabilities; and the treatment of structural and contact-impact problems. Key features: Presents a detailed and rigorous treatment of nonlinear solid mechanics and how it can be implemented in finite element analysis Covers many of the material laws used in today’s software and research Introduces advanced topics in nonlinear finite element modelling of continua Introduction of multiresolution continuum theory and XFEM Accompanied by a website hosting a solution manual and MATLAB® and FORTRAN code Nonlinear Finite Elements for Continua and Structures, Second Edition is a must-have textbook for graduate students in mechanical engineering, civil engineering, applied mathematics, engineering mechanics, and materials science, and is also an excellent source of information for researchers and practitioners.

Download or read book Buckling of Bars Plates and Shells written by Don Orr Brush and published by McGraw-Hill Companies. This book was released on 1975 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Finite Element Analysis written by Nitin S. Gokhale and published by FINITE TO INFINITE. This book was released on 2008 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights of the book: Discussion about all the fields of Computer Aided Engineering, Finite Element Analysis Sharing of worldwide experience by more than 10 working professionals Emphasis on Practical usuage and minimum mathematics Simple language, more than 1000 colour images International quality printing on specially imported paper Why this book has been written ... FEA is gaining popularity day by day & is a sought after dream career for mechanical engineers. Enthusiastic engineers and managers who want to refresh or update the knowledge on FEA are encountered with volume of published books. Often professionals realize that they are not in touch with theoretical concepts as being pre-requisite and find it too mathematical and Hi-Fi. Many a times these books just end up being decoration in their book shelves ... All the authors of this book are from IIT€™s & IISc and after joining the industry realized gap between university education and the practical FEA. Over the years they learned it via interaction with experts from international community, sharing experience with each other and hard route of trial & error method. The basic aim of this book is to share the knowledge & practices used in the industry with experienced and in particular beginners so as to reduce the learning curve & avoid reinvention of the cycle. Emphasis is on simple language, practical usage, minimum mathematics & no pre-requisites. All basic concepts of engineering are included as & where it is required. It is hoped that this book would be helpful to beginners, experienced users, managers, group leaders and as additional reading material for university courses.

Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Continuum Micromechanics written by P. Suquet and published by Springer. This book was released on 2014-05-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent progress of fundamental nature made in the new developed field of micromechanics: transformation field analysis, variational bounds for nonlinear composites, higher-order gradients in micromechanical damage models, dynamics of composites, pattern based variational bounds.

Download or read book Computational and Experimental Simulations in Engineering written by Hiroshi Okada and published by Springer Nature. This book was released on 2019-11-16 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 24th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Tokyo, Japan on March 25-28, 2019. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Download or read book Dynamic Fracture Mechanics written by P. H. Wen and published by Computational Mechanics. This book was released on 1996 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes the formulation and numerical implementation of both two- and three-dimensional indirect boundary element methods (for example, the fictitious load method and the displacement discontinuity method). It also provides an analysis of crack problems in elastostatic and elastodynamic fracture mechanics, and methods for evaluating weight functions for dynamic problems.

Download or read book Dynamic Stability of Structures written by Wei-Chau Xie and published by Cambridge University Press. This book was released on 2006-06-05 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the theory of parametric stability of structures under deterministic and stochastic loadings.

Download or read book Smoothed Particle Hydrodynamics written by Gui-Rong Liu and published by World Scientific. This book was released on 2003 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first-ever book on smoothed particle hydrodynamics (SPH) and its variations, covering the theoretical background, numerical techniques, code implementation issues, and many novel and interesting applications. It contains many appealing and practical examples, including free surface flows, high explosive detonation and explosion, underwater explosion and water mitigation of explosive shocks, high velocity impact and penetration, and multiple scale simulations coupled with the molecular dynamics method. An SPH source code is provided and coupling of SPH and molecular dynamics is discussed for multiscale simulation, making this a friendly book for readers and SPH users.

Download or read book Meshless Methods in Solid Mechanics written by Youping Chen and published by Springer Science & Business Media. This book was released on 2006-12-31 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of continuum mechanics, the integral formulation methods of continuum problems, the basic concepts of finite element methods, and the methodologies, formulations, procedures, and applications of various meshless methods. It also provides general and detailed procedures of meshless analysis on elastostatics, elastodynamics, non-local continuum mechanics and plasticity with a large number of numerical examples. Some basic and important mathematical methods are included in the Appendixes. For readers who want to gain knowledge through hands-on experience, the meshless programs for elastostatics and elastodynamics are provided on an included disc.

Download or read book Computational Methods for Fracture written by Timon Rabczuk and published by MDPI. This book was released on 2019-10-28 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of 17 scientific papers about the computational modeling of fracture. Some of the manuscripts propose new computational methods and/or how to improve existing cutting edge methods for fracture. These contributions can be classified into two categories: 1. Methods which treat the crack as strong discontinuity such as peridynamics, scaled boundary elements or specific versions of the smoothed finite element methods applied to fracture and 2. Continuous approaches to fracture based on, for instance, phase field models or continuum damage mechanics. On the other hand, the book also offers a wide range of applications where state-of-the-art techniques are employed to solve challenging engineering problems such as fractures in rock, glass, concrete. Also, larger systems such as fracture in subway stations due to fire, arch dams, or concrete decks are studied.