Download or read book Nonlinear Theory of Dislocations and Disclinations in Elastic Bodies written by Leonid M. Zubov and published by Springer Science & Business Media. This book was released on 1997-10-10 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author applies methods of nonlinear elasticity to the investigation of the defects in the crystal structure of solids such as dislocations and disclinations. These defects characterize mainly the plastic and strength properties of many constructional materials. Contrary to the well-developed nonlinear continual theory of dislocations continuously distributed in the body, which is based on geometrical ideas, the nonlinear analysis of isolated dislocations and disclinations is less developed; it is given for the first time in this book. This analysis is essential since the deformation near the axes of an isolated defect is rather big, so the linear theory is not applicable here. The general theory of Volterra's dislocations in elastic media under large deformations is developed. A number of exact solutions of the problems are found. The nonlinear approach to investigating the isolated defects produces the results that often differ qualitatively from those of the linear theory. The book addresses students and researchers.

Download or read book Nonlinear Theory of Dislocations and Disclinations in Elastic Bodies written by Leonid M. Zubov and published by Springer Science & Business Media. This book was released on 2008-09-11 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author applies methods of nonlinear elasticity to investigate the defects in the crystal structure of solids such as dislocations and disclinations that characterize the plastic and strength properties of many materials. Contrary to the geometrically motivated nonlinear theory of dislocations continuously distributed over the body, nonlinear analysis of isolated dislocations and disclinations is less developed; it is given for the first time in this book, and in a form accessible to both students and researchers. The general theory of Volterra's dislocations in elastic media under large deformations is developed. A number of exact solutions are found. The nonlinear approach to investigating the isolated defects produces results that often differ qualitatively from those of the linear theory.

Download or read book Advances in Linear and Nonlinear Continuum and Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2023-12-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a current image of modern mechanics. The book reflects current state of the art in the field of continuum mechanics and mechanics of structures including recent achievements in classic and non-classic approaches. The chapters are written by leading specialist in the field, so the book collects cutting edge investigations in the field. As a target we consider the society starting from beginners, i.e. master and PhD students, and also leaders in the field, that is professors of universities and civil, mechanical and aerospace engineers.

Download or read book Advanced Methods of Continuum Mechanics for Materials and Structures written by Konstantin Naumenko and published by Springer. This book was released on 2016-05-12 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of contributions on advanced approaches of continuum mechanics, which were written to celebrate the 60th birthday of Prof. Holm Altenbach. The contributions are on topics related to the theoretical foundations for the analysis of rods, shells and three-dimensional solids, formulation of constitutive models for advanced materials, as well as development of new approaches to the modeling of damage and fractures.

Download or read book Advances in Mechanics of Microstructured Media and Structures written by Francesco dell'Isola and published by Springer. This book was released on 2018-02-27 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an homage to the pioneering works of E. Aero and G. Maugin in the area of analytical description of generalized continua. It presents a collection of contributions on micropolar, micromorphic and strain gradient media, media with internal variables, metamaterials, beam lattices, liquid crystals, and others. The main focus is on wave propagation, stability problems, homogenization, and relations between discrete and continuous models.

Download or read book Recent Approaches in the Theory of Plates and Plate Like Structures written by Holm Altenbach and published by Springer Nature. This book was released on 2022-01-01 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the various approaches in establishment the basic equations of one- and two-dimensional structural elements. In addition, the boundaries of validity of the theories and the estimation of errors in approximate theories are given. Many contributions contain not only new theories, but also new applications, which makes the book interesting for researcher and graduate students.

Download or read book Recent Developments in the Theory of Shells written by Holm Altenbach and published by Springer Nature. This book was released on 2019-09-25 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commemorates the 80th birthday of Prof. W. Pietraszkiewicz, a prominent specialist in the field of general shell theory. Reflecting Prof. Pietraszkiewicz’s focus, the respective papers address a range of current problems in the theory of shells. In addition, they present other structural mechanics problems involving dimension-reduced models. Lastly, several applications are discussed, including material models for such dimension-reduced structures.

Download or read book Sixty Shades of Generalized Continua written by Holm Altenbach and published by Springer Nature. This book was released on 2023-02-13 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, well-known scientists discuss modern aspects of generalized continua, in order to better understand modern materials and advanced structures. They possess complicated internal structure, and it requires the development of new approaches to model such structures and new effects caused by it. This book combines fundamental contributions in honor of Victor Eremeyev and his 60th birthday.

Download or read book Non Classical Continuum Mechanics written by Gérard A. Maugin and published by Springer. This book was released on 2016-09-24 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary offers clear and reliable explanations of over 100 keywords covering the entire field of non-classical continuum mechanics and generalized mechanics, including the theory of elasticity, heat conduction, thermodynamic and electromagnetic continua, as well as applied mathematics. Every entry includes the historical background and the underlying theory, basic equations and typical applications. The reference list for each entry provides a link to the original articles and the most important in-depth theoretical works. Last but not least, ever y entry is followed by a cross-reference to other related subject entries in the dictionary.

Download or read book Modeling Synthesis and Fracture of Advanced Materials for Industrial and Medical Applications written by Sergei M. Aizikovich and published by Springer Nature. This book was released on 2020-08-12 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the international workshop PMSDAM’19. The respective contributions offer valuable insights for researchers working on numerical solutions to advanced materials problems. The problems concerning the remineralization of teeth are considered. Of particular interest are articles exploring topics at the interface of different disciplines.

Download or read book Foundations of Micropolar Mechanics written by Victor A. Eremeyev and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents foundations of the micropolar continuum mechanics including a short but comprehensive introduction of stress and strain measures, derivation of motion equations and discussion of the difference between Cosserat and classical (Cauchy) continua, and the discussion of more specific problems related to the constitutive modeling, i.e. constitutive inequalities, symmetry groups, acceleration waves, etc.

Download or read book Shell Structures Theory and Applications Volume 4 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2017-10-30 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples of shell structures in technology include automobile bodies, water and oil tanks, pipelines, silos, wind turbine towers, and nanotubes. Nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes or wings of insects. In the human body arteries, the eye shell, the diaphragm, the skin and the pericardium are all shells as well. Shell Structures: Theory and Applications, Volume 4 contains 132 contributions presented at the 11th Conference on Shell Structures: Theory and Applications (Gdansk, Poland, 11-13 October 2017). The papers reflect a wide spectrum of scientific and engineering problems from theoretical modelling through strength, stability and dynamic behaviour, numerical analyses, biomechanic applications up to engineering design of shell structures. Shell Structures: Theory and Applications, Volume 4 will be of interest to academics, researchers, designers and engineers dealing with modelling and analyses of shell structures. It may also provide supplementary reading to graduate students in Civil, Mechanical, Naval and Aerospace Engineering.

Download or read book New Achievements in Continuum Mechanics and Thermodynamics written by Bilen Emek Abali and published by Springer. This book was released on 2019-03-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a liber amicorum dedicated to Wolfgang H. Müller, and highlights recent advances in Prof. Müller’s major fields of research: continuum mechanics, generalized mechanics, thermodynamics, mechanochemistry, and geomechanics. Over 50 of Prof. Müller’s friends and colleagues contributed to this book, which commemorates his 60th birthday and was published in recognition of his outstanding contributions.

Download or read book Theory of Elasticity and Plasticity written by Valentin Molotnikov and published by Springer Nature. This book was released on 2021-04-12 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a core text for university curricula in solid body mechanics and, at the same time, examines the main achievements of state of the art research in the mechanics of elastic and non-elastic materials. This latter goal of the book is achieved through rich bibliographic references, many from the authors’ own work. authors. Distinct from similar texts, there are no claims in this volume to a single universal theory of plasticity. However, solutions are given to some new problems and to the construction of models useful both in pedagogic terms for students and practical terms for professional design engineers. Examples include the authors’ decisions about the Brazilian test, stability of rock exposure, and pile foundations. Designed for both upper-level university students and specialists in the mechanics of deformable hard body, the material in this book serves as a source for numerous topics of course and diploma concentration.

Download or read book Geometric Continuum Mechanics written by Reuven Segev and published by Springer Nature. This book was released on 2020-05-13 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume explores the applications of various topics in modern differential geometry to the foundations of continuum mechanics. In particular, the contributors use notions from areas such as global analysis, algebraic topology, and geometric measure theory. Chapter authors are experts in their respective areas, and provide important insights from the most recent research. Organized into two parts, the book first covers kinematics, forces, and stress theory, and then addresses defects, uniformity, and homogeneity. Specific topics covered include: Global stress and hyper-stress theories Applications of de Rham currents to singular dislocations Manifolds of mappings for continuum mechanics Kinematics of defects in solid crystals Geometric Continuum Mechanics will appeal to graduate students and researchers in the fields of mechanics, physics, and engineering who seek a more rigorous mathematical understanding of the area. Mathematicians interested in applications of analysis and geometry will also find the topics covered here of interest.

Download or read book Shell Structures Theory and Applications Vol 2 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2009-09-22 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shell Structures. Theory and Applications, Volume 2 contains 77 contributions from over 17 countries, reflecting a wide spectrum of scientific and engineering problems of shell structures. The papers are divided into six broad groups: 1. General lectures; 2. Theoretical modeling; 3. Stability; 4. Dynamics; 5. Numerical analysis; 6. Engineering

Download or read book Generalized Continua as Models for Materials written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents contributions describing the micro- and macro-behaviours, new existence and uniqueness theorems, the formulation of multi-scale problems, etc. and now it is time to ponder again the state of matter and to discuss new trends and applications. The main focus is directed on the following items - Modelling and simulation of materials with significant microstructure, - Generalized continua as a result of multi-scale models, - Multi-field actions on materials resulting in generalized material models, and - Comparison with discrete modelling approaches