Download or read book Nonlinear System Analysis and Identification from Random Data written by Julius S. Bendat and published by Wiley-Interscience. This book was released on 1990-03-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes procedures to identify and analyze the properties of many types of nonlinear systems from random data measured at the input and output points of physical systems. Improvements are offered in applying older techniques, and problems that traditionally have been difficult to analyze are solved by new, simpler procedures. Formulas are stated for optimum nonlinear system identification in both general models consisting of parallel, linear bilinear and trilinear systems, and special models consisting of parallel linear, finite-memory square-law systems and finite-memory cubic systems. New results, obtained here, show when and how to replace complicated single input/output nonlinear models with simpler alternative multiple input/single output linear models. New error analysis formulas are presented to design experiments and to evaluate estimates obtained from measured data. Includes many illustrative examples.
Download or read book Nonlinear System Techniques and Applications written by Julius S. Bendat and published by Wiley-Interscience. This book was released on 1998-01-20 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: New practical techniques for nonlinear system research and evaluation Nonlinear Systems Techniques and Applications provides the most practical techniques currently available for analyzing and identifying nonlinear systems from random data measured at the input and output points of the nonlinear systems. These new techniques require only one-dimensional spectral functions that are much simpler to compute and apply than previous nonlinear procedures. The new results show when and how to replace a wide class of single-input/single-output nonlinear models with simpler equivalent multiple-input/single-output linear models. While other techniques are usually restricted to Gaussian data, the new techniques developed here apply to data with arbitrary probability, correlation, and spectral properties. Numerous examples used in the book are based on the analysis of real physical data passing through real nonlinear systems in the fields of oceanography, automotive engineering, and biomedical research. For practicing engineers and scientists involved in aerospace, automotive, biomedical, electrical, mechanical, oceanographic, and other activities concerned with nonlinear system analysis, Nonlinear Systems Techniques and Applications is the essential reference work in the field.
Download or read book Nonlinear Systems and Applications written by V. Lakshmikantham and published by . This book was released on 1977 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Systems and Applications ...
Download or read book Nonlinear Systems Analysis written by M. Vidyasagar and published by SIAM. This book was released on 2002-01-01 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: When M. Vidyasagar wrote the first edition of Nonlinear Systems Analysis, most control theorists considered the subject of nonlinear systems a mystery. Since then, advances in the application of differential geometric methods to nonlinear analysis have matured to a stage where every control theorist needs to possess knowledge of the basic techniques because virtually all physical systems are nonlinear in nature. The second edition, now republished in SIAM's Classics in Applied Mathematics series, provides a rigorous mathematical analysis of the behavior of nonlinear control systems under a variety of situations. It develops nonlinear generalizations of a large number of techniques and methods widely used in linear control theory. The book contains three extensive chapters devoted to the key topics of Lyapunov stability, input-output stability, and the treatment of differential geometric control theory. Audience: this text is designed for use at the graduate level in the area of nonlinear systems and as a resource for professional researchers and practitioners working in areas such as robotics, spacecraft control, motor control, and power systems.
Download or read book Advances and Applications in Nonlinear Control Systems written by Sundarapandian Vaidyanathan and published by Springer. This book was released on 2016-03-17 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest advances and applications of nonlinear control systems. It consists of 30 contributed chapters by subject experts who are specialized in the various topics addressed in this book. The special chapters have been brought out in the broad areas of nonlinear control systems such as robotics, nonlinear circuits, power systems, memristors, underwater vehicles, chemical processes, observer design, output regulation, backstepping control, sliding mode control, time-delayed control, variables structure control, robust adaptive control, fuzzy logic control, chaos, hyperchaos, jerk systems, hyperjerk systems, chaos control, chaos synchronization, etc. Special importance was given to chapters offering practical solutions, modeling and novel control methods for the recent research problems in nonlinear control systems. This book will serve as a reference book for graduate students and researchers with a basic knowledge of electrical and control systems engineering. The resulting design procedures on the nonlinear control systems are emphasized using MATLAB software.
Download or read book Linear Time varying Approximations to Nonlinear Dynamical Systems written by Maria Tomas-Rodriguez and published by Springer Science & Business Media. This book was released on 2010-02-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear, Time-varying Approximations to Nonlinear Dynamical Systems introduces a new technique for analysing and controlling nonlinear systems. This method is general and requires only very mild conditions on the system nonlinearities, setting it apart from other techniques such as those – well-known – based on differential geometry. The authors cover many aspects of nonlinear systems including stability theory, control design and extensions to distributed parameter systems. Many of the classical and modern control design methods which can be applied to linear, time-varying systems can be extended to nonlinear systems by this technique. The implementation of the control is therefore simple and can be done with well-established classical methods. Many aspects of nonlinear systems, such as spectral theory which is important for the generalisation of frequency domain methods, can be approached by this method.
Download or read book Nonlinear Systems written by Shankar Sastry and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been much excitement over the emergence of new mathematical techniques for the analysis and control of nonlinear systems. In addition, great technological advances have bolstered the impact of analytic advances and produced many new problems and applications which are nonlinear in an essential way. This book lays out in a concise mathematical framework the tools and methods of analysis which underlie this diversity of applications.
Download or read book Nonlinear System Analysis and Identification from Random Data written by Julius S. Bendat and published by Wiley-Interscience. This book was released on 1990 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes procedures to identify and analyze the properties of many types of nonlinear systems from random data measured at the input and output points of physical systems. Improvements are offered in applying older techniques, and problems that traditionally have been difficult to analyze are solved by new, simpler procedures. Formulas are stated for optimum nonlinear system identification in both general models consisting of parallel, linear bilinear and trilinear systems, and special models consisting of parallel linear, finite-memory square-law systems and finite-memory cubic systems. New results, obtained here, show when and how to replace complicated single input/output nonlinear models with simpler alternative multiple input/single output linear models. New error analysis formulas are presented to design experiments and to evaluate estimates obtained from measured data. Includes many illustrative examples.
Download or read book Nonlinear System Identification written by Oliver Nelles and published by Springer Nature. This book was released on 2020-09-09 with total page 1235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists in academia and industry with a thorough understanding of the underlying principles of nonlinear system identification. It equips them to apply the models and methods discussed to real problems with confidence, while also making them aware of potential difficulties that may arise in practice. Moreover, the book is self-contained, requiring only a basic grasp of matrix algebra, signals and systems, and statistics. Accordingly, it can also serve as an introduction to linear system identification, and provides a practical overview of the major optimization methods used in engineering. The focus is on gaining an intuitive understanding of the subject and the practical application of the techniques discussed. The book is not written in a theorem/proof style; instead, the mathematics is kept to a minimum, and the ideas covered are illustrated with numerous figures, examples, and real-world applications. In the past, nonlinear system identification was a field characterized by a variety of ad-hoc approaches, each applicable only to a very limited class of systems. With the advent of neural networks, fuzzy models, Gaussian process models, and modern structure optimization techniques, a much broader class of systems can now be handled. Although one major aspect of nonlinear systems is that virtually every one is unique, tools have since been developed that allow each approach to be applied to a wide variety of systems.
Download or read book Control and Dynamic Systems V50 Robust Control System Techniques and Applications written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 50: Robust Control System Techniques and Applications, Part 1 of 2 is a two-volume sequence devoted to the issues and application of robust control systems techniques. This volume is composed of 10 chapters and begins with a presentation of the important techniques for dealing with conflicting design objectives in control systems. The subsequent chapters describe the robustness techniques of systems using differential-difference equations; the design of a wide class of robust nonlinear systems, the techniques for dealing with the problems resulting from the use of observers in robust systems design, and the effective techniques for the robust control on non-linear time varying of tracking control systems with uncertainties. These topics are followed by discussions of the effective techniques for the robust control on non-linear time varying of tracking control systems with uncertainties and for incorporating adaptive control techniques into a (non-adaptive) robust control design. Other chapters present techniques for achieving exponential and robust stability for a rather general class of nonlinear systems, techniques in modeling uncertain dynamics for robust control systems design, and techniques for the optimal synthesis of these systems. The last chapters provide a generalized eigenproblem solution for both singular and nonsingular system cases. These chapters also look into the stability robustness design for discrete-time systems. This book will be of value to process and systems engineers, designers, and researchers.
Download or read book Neural Network Systems Techniques and Applications written by and published by Academic Press. This book was released on 1998-02-09 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book emphasizes neural network structures for achieving practical and effective systems, and provides many examples. Practitioners, researchers, and students in industrial, manufacturing, electrical, mechanical,and production engineering will find this volume a unique and comprehensive reference source for diverse application methodologies. Control and Dynamic Systems covers the important topics of highly effective Orthogonal Activation Function Based Neural Network System Architecture, multi-layer recurrent neural networks for synthesizing and implementing real-time linear control,adaptive control of unknown nonlinear dynamical systems, Optimal Tracking Neural Controller techniques, a consideration of unified approximation theory and applications, techniques for the determination of multi-variable nonlinear model structures for dynamic systems with a detailed treatment of relevant system model input determination, High Order Neural Networks and Recurrent High Order Neural Networks, High Order Moment Neural Array Systems, Online Learning Neural Network controllers, and Radial Bias Function techniques. Coverage includes: Orthogonal Activation Function Based Neural Network System Architecture (OAFNN) Multilayer recurrent neural networks for synthesizing and implementing real-time linear control Adaptive control of unknown nonlinear dynamical systems Optimal Tracking Neural Controller techniques Consideration of unified approximation theory and applications Techniques for determining multivariable nonlinear model structures for dynamic systems, with a detailed treatment of relevant system model input determination
Download or read book Nonlinear System Identification written by Oliver Nelles and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from an engineering point of view, this book covers the most common and important approaches for the identification of nonlinear static and dynamic systems. The book also provides the reader with the necessary background on optimization techniques, making it fully self-contained. The new edition includes exercises.
Download or read book Algebraic and Differential Methods for Nonlinear Control Theory written by Rafael Martínez-Guerra and published by Springer. This book was released on 2019-01-30 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a short primer in engineering mathematics with a view on applications in nonlinear control theory. In particular, it introduces some elementary concepts of commutative algebra and algebraic geometry which offer a set of tools quite different from the traditional approaches to the subject matter. This text begins with the study of elementary set and map theory. Chapters 2 and 3 on group theory and rings, respectively, are included because of their important relation to linear algebra, the group of invertible linear maps (or matrices) and the ring of linear maps of a vector space. Homomorphisms and Ideals are dealt with as well at this stage. Chapter 4 is devoted to the theory of matrices and systems of linear equations. Chapter 5 gives some information on permutations, determinants and the inverse of a matrix. Chapter 6 tackles vector spaces over a field, Chapter 7 treats linear maps resp. linear transformations, and in addition the application in linear control theory of some abstract theorems such as the concept of a kernel, the image and dimension of vector spaces are illustrated. Chapter 8 considers the diagonalization of a matrix and their canonical forms. Chapter 9 provides a brief introduction to elementary methods for solving differential equations and, finally, in Chapter 10, nonlinear control theory is introduced from the point of view of differential algebra.
Download or read book Nonlinear Control of Engineering Systems written by Warren E. Dixon and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical yet rigorous book provides a development of nonlinear, Lyapunov-based tools and their use in the solution of control-theoretic problems. Rich in motivating examples and new design techniques, the text balances theoretical foundations and real-world implementation.
Download or read book Control and Dynamic Systems V51 Robust Control System Techniques and Applications written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Application, Volume 51: Robust Control System Techniques and Applications Part 2 of 2 discusses system robustness techniques. This volume presents a comprehensive treatment of robust system techniques in nonlinear, linear, and multilinear interval systems. It also covers techniques for dealing with system disturbances, system modeling approximations, and parameter uncertainties. This volume ends by reviewing robustness techniques for systems with structured state space uncertainty. This volume will be of great use as a reference source for mechanical and electrical engineers.
Download or read book Nonlinear System Analysis and Synthesis Techniques and applications written by J. Karl Hedrick and published by . This book was released on 1980 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Systems in Heat Transfer written by Davood Domairry Ganji and published by Elsevier. This book was released on 2017-09-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Heat Transfer: Mathematical Modeling and Analytical Methods addresses recent progress and original research in nonlinear science and its application in the area of heat transfer, with a particular focus on the most important advances and challenging applications. The importance of understanding analytical methods for solving linear and nonlinear constitutive equations is essential in studying engineering problems. This book provides a comprehensive range of (partial) differential equations, applied in the field of heat transfer, tackling a comprehensive range of nonlinear mathematical problems in heat radiation, heat conduction, heat convection, heat diffusion and non-Newtonian fluid systems. Providing various innovative analytical techniques and their practical application in nonlinear engineering problems is the unique point of this book. Drawing a balance between theory and practice, the different chapters of the book focus not only on the broader linear and nonlinear problems, but also applied examples of practical solutions by the outlined methodologies. Demonstrates applied mathematical techniques in the engineering applications, especially in nonlinear phenomena Exhibits a complete understanding of analytical methods and nonlinear differential equations in heat transfer Provides the tools to model and interpret applicable methods in heat transfer processes or systems to solve related complexities
