Download or read book Nonlinear Mechanics of Soft Fibrous Materials written by Luis Dorfmann and published by Springer. This book was released on 2014-12-02 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a state-of-the-art overview of the fundamental theories, established models and ongoing research related to the modeling of these materials. Two approaches are conventionally used to develop constitutive relations for highly deformable fibrous materials. According to the phenomenological approach, a strain energy density function can be defined in terms of strain invariants. The other approach is based on kinetic theories, which treats a fibrous material as a randomly oriented inter-tangled network of long molecular chains bridged by permanent and temporary junctions. At the micro-level, these are associated with chemical crosslinks and active entanglements, respectively. The papers include carefully crafted overviews of the fundamental formulation of the three-dimensional theory from several points of view, and address their equivalences and differences. Also included are solutions to boundary-value problems which are amenable to experimental verification. A further aspect is the elasticity of filaments, stability of equilibrium and thermodynamics of the molecular network theory.

Download or read book Nonlinear Mechanics of Shells and Plates in Composite Soft and Biological Materials written by Marco Amabili and published by Cambridge University Press. This book was released on 2018-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides the reader into the modelling of shell structures in applications where advanced composite materials or complex biological materials must be described with great accuracy. A valuable resource for researchers, professionals and graduate students, it presents a variety of practical concepts, diagrams and numerical results.

Download or read book Mechanics of Fibrous Materials and Applications written by Catalin Picu and published by Springer. This book was released on 2019-07-31 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the state of the art in the mechanics of fibrous media, providing an overview of the theoretical, modelling and practical aspects of designing and working with these materials. It also describes the advanced methods needed to handle their specific features, including the mechanics of generalized continua, dedicated homogenization methods and computational techniques, and presents applications of fibrous media to diverse fields and over a broad spectrum of scales, ranging from aeronautics to biomechanics.

Download or read book Advances in Agricultural Machinery and Technologies written by Guangnan Chen and published by CRC Press. This book was released on 2018-03-05 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The agricultural industry is dealing with enormous challenges across the globe, including the limited availability of arable lands and fresh water, as well as the effect of climate change. Machinery plays a crucial role in agriculture and farming systems, in order to feed the world’s growing population. In the last decade, we have witnessed major advances in agricultural machinery and technologies, particularly as manufacturers and researchers develop and apply various novel ways of automation as well as the data and information gathering and analyzing capabilities of their machinery. This book presents the state-of-the-art information on the important innovations in the agricultural and horticultural industry. It reviews and presents different novel technologies and implementation of these technologies to optimize farming processes and food production. There are four sections, each addressing a specific area of development. Section I discusses the recent development of farm machinery and technology. Section II focuses on water and irrigation engineering. Section III covers harvesting and post-harvest technology. Section IV describes computer modelling and simulation. Each section highlights current industry trends and latest research progress. This book is ideal for those working in or are associated with the fields of agriculture, agri-food chain and technology development and promotion.

Download or read book Structure and Mechanics of Textile Fibre Assemblies written by Peter Schwartz and published by Woodhead Publishing. This book was released on 2019-08-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure and Mechanics of Textile Fibre Assemblies, Second Edition, offers detailed information on all aspects of textile structure and mechanics. This new edition is updated to include the latest technology and techniques, as well as fiber assembly for major application areas. Chapters discuss the mechanics of materials and key mechanical concepts, such as stress, strain, bending and shear, but also examine structure and mechanics in-depth, including fabric type, covering yarns, woven fabrics, knitted fabrics, nonwovens, tufted fabrics, textile composites, laminated and coated textile fabrics, and braided structures. Finally, structure and mechanics are approached from the viewpoint of key applications areas. This book will be an essential source of information for scientists, technologists, engineers, designers, manufacturers and R&D managers in the textile industry, as well as academics and researchers in textiles and fiber science. - Provides methodical coverage of all essential fabric types, including yarns, woven fabrics, knitted fabrics, nonwovens, tufted fabrics, textile composites, laminated and coated textile fabrics, and braided structures - Enables the reader to understand the mechanical properties and structural parameters of fabric at a highly detailed level - Expanded update includes an analysis of fiber assemblies for key technical areas, such as protective fabrics and medical textiles

Download or read book Biomaterial Mechanics written by Heather N. Hayenga and published by CRC Press. This book was released on 2017-05-23 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental knowledge of mechanics and its application to biomaterials. An overivew of computer modeling in biomaterials is offered and multiple fields where biomaterials are used are reviewed with particular emphasis to the importance of the mechanical properties of biomaterials. The reader will obtain a better understanding of the current techniqus to synthesize, characterize and integrate biomaterials into the human body.

Download or read book Mechanics of Fibrous Networks written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-02-19 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Fibrous Networks covers everything there is to know about the mechanics of fibrous networks, from basic analysis of simple networks to the characterization of complex cases of deformation, loading, damage and fracture. Looking at various types of fibrous materials, the book studies their microstructural characterization, quantification of their mechanical properties, and performance at fiber and network levels. In addition, the book outlines numerical strategies for simulation, design and optimization of fibrous products. Techniques for testing the mechanical response of these materials in different loading and environmental conditions are outlined as well. This comprehensive resource will aid readers in obtaining qualitative data for various fibrous networks. In addition, it will help them develop modeling strategies and fine-tune mechanical performance fibrous networks and products by changing their microstructure to develop new products with desired properties and performance. - Discusses all the main features and characteristics of fibrous networks, including their microstructural characterization, quantification of their mechanical properties, and performance at the fiber and network level - Covers both basic analysis of simple networks as well as complex cases of deformation, loading, damage and fracture of fibrous networks - Outlines advanced numerical schemes for simulation, design and optimization of various fibrous materials

Download or read book Structure Based Mechanics of Tissues and Organs written by Ghassan S. Kassab and published by Springer. This book was released on 2016-01-28 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book portrays the commonality of tissue micro-structure that dictates physiological function in various organs (microstructure-function relation). Tissue and organ models are used to illustrate physiological functions based on microstructure. Fiber scale properties such as orientation and crimp are described in detail. Structurally-based constitutive models are given throughout the book, not only to avoid ambiguities in material characterization, but also to offer insights into the function, structure, and mechanics of tissue components. A statement of future directions of the field is also given, including how advancements, such as state-of-the-art computational modeling and optical measurements of tissue/cells structures, are taking structure-based modeling to the next level. This book also: Provides a comprehensive view of tissue modeling across multiple systems Broadens readers’ understanding of state-of-the-art computational modeling and optical measurements of tissue/cells structures Describes in detail fiber scale properties such as orientation and crimp

Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications

Download or read book Continuum Mechanics Volume II written by José Merodio and published by EOLSS Publications. This book was released on 2011-11-30 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of continuum mechanics is to predict the response of a body that is under the action of external and/or internal influences, i.e. to capture and describe different mechanisms associated with the motion of a body that is under the action of loading. A body in continuum mechanics is considered to be matter continuously distributed in space. Hence, no attention is given to the microscopic (atomic) structure of real materials although non-classical generalized theories of continuum mechanics are able to deal with the mesoscopic structure of matter (i.e. defects, cracks, dispersive lengths, ...). Matter occupies space in time and the response of a body in continuum mechanics is restricted to the Newtonian space-time of classical mechanics in this volume. Einstein’s theory of relativity is not considered. In the classical sense, loading is considered as any action that changes the motion of the body. This includes, for instance, a change in temperature or a force applied. By introducing the concept of configurational forces a load may also be considered as a force that drives a change in the material space, for example the opening of a crack. Continuum mechanics refers to field descriptions of phenomena that are usually modeled by partial differential equations and, from a mathematical point of view, require non-standard knowledge of non-simple technicalities. One purpose in this volume has been to present the different subjects in a self-contained way for a general audience. The organization of the volume is as follows. Mathematically, to predict the response of a body it is necessary to formulate boundary value problems governed by balance laws. The theme of the volume, that is an overview of the subject, has been written with this idea in mind for beginners in the topic. Chapter 1 is an introduction to continuum mechanics based on a one-dimensional framework in which, simultaneously, a more detailed organization of the chapters of this volume is given. A one-dimensional approach to continuum mechanics in some aspects maybe misleading since the analysis is oversimplified. Nevertheless, it allows us to introduce the subject through the early basic steps of the continuum analysis for a general audience. Chapters 3, 4 and 5 are devoted to the mathematical setting of continuum analysis: kinematics, balance laws and thermodynamics, respectively. Chapters 6 and 7 are devoted to constitutive equations. Chapters 8 and 9 deal with different issues in the context of linear elastostatics and linear elastodynamics and waves, respectively, for solids. Linear Elasticity is a classical and central theory of continuum mechanics. Chapter 10 deals with fluids while chapter 11 analyzes the coupled theory of thermoelasticity. Chapter 12 deals with nonlinear elasticity and its role in the continuum framework. Chapters 13 and 14 are dedicated to different applications of solid and fluid mechanics, respectively. The rest of the chapters involve some advanced topics. Chapter 15 is dedicated to turbulence, one of the main challenges in fluid mechanics. Chapter 16 deals with electro-magneto active materials (a coupled theory). Chapter 17 deals with specific ideas of soft matter and chapter 18 deals with configurational forces. In chapter 19, constitutive equations are introduced in a general (implicit) form. Well-posedness (existence, time of existence, uniqueness, continuity) of the equations of the mechanics of continua is an important topic which involves sophisticated mathematical machinery. Chapter 20 presents different analyses related to these topics. Continuum Mechanics is an interdisciplinary subject that attracts the attention of engineers, mathematicians, physicists, etc., working in many different disciplines from a purely scientific environment to industrial applications including biology, materials science, engineering, and many other subjects.

Download or read book The Vulnerable Atherosclerotic Plaque written by Renu Virmani and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finally, a convenient, one-volume summary of current knowledge on an area of increasing importance! The Vulnerable Atherosclerotic Plaque presents contributions from the best investigators in the field, skillfully edited for easy reading and lavishly illustrated with high-quality, full-color images. After a considered and concise introduction, the book concentrates on: Pathology of vulnerable plaque Triggers for plaque rupture Imaging of unstable plaque Management of vulnerable plaques Careful editing allows the authors to avoid repetition and provide comprehensive coverage of pathology, detection, and management. This thorough and authoritative reference will change the way interventionists look at the disease.

Download or read book Biomaterials for 3D Tumor Modeling written by Subhas C. Kundu and published by Elsevier. This book was released on 2020-08-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials for 3D Tumor Modeling reviews the fundamentals and most relevant areas of the latest advances of research of 3D cancer models, focusing on biomaterials science, tissue engineering, drug delivery and screening aspects. The book reviews advanced fundamental topics, including the causes of cancer, existing cancer models, angiogenesis and inflammation during cancer progression, and metastasis in 3D biomaterials. Then, the most relevant biomaterials are reviewed, including methods for engineering and fabrication of biomaterials. 3D models for key biological systems and types of cancer are also discussed, including lung, liver, oral, prostate, pancreatic, ovarian, bone and pediatric cancer. This book is suitable for those working in the disciplines of materials science, biochemistry, genetics, molecular biology, drug delivery and regenerative medicine. - Reviews key biomaterials topics, including synthetic biomaterials, hydrogels, e-spun materials and nanoparticles - Provides a comprehensive overview of 3D cancer models for key biological systems and cancer types - Includes an overview of advanced fundamental concepts for an interdisciplinary audience in materials science, biochemistry, regenerative medicine and drug delivery

Download or read book Journal of the Royal Society Interface written by and published by . This book was released on 2007 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration and Damping Behavior of Biocomposites written by Senthil Muthu Kumar Thiagamani and published by CRC Press. This book was released on 2022-04-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced polymer composites exhibit better damping characteristics than conventional metals due to the viscoelastic nature of the polymers. There has been a growing interest among research communities and industries in the use of natural fibers as reinforcements in structural and semi-structural applications, given their environmental advantages. Knowledge of the vibration and damping behavior of biocomposites is essential for engineers and scientists who work in the field of composite materials. Vibration and Damping Behavior of Biocomposites brings together the latest research developments in vibration and viscoelastic behavior of composites filled with different natural fibers. Features: Reviews the effect of various types of reinforcements on free vibration behavior Emphasizes aging effects, influence of compatibilizers, and hybrid fiber reinforcement Explores the influence of resin type on viscoelastic properties Covers the use of computational modeling to analyze dynamic behavior and viscoelastic properties Discusses viscoelastic damping characterization through dynamic mechanical analysis. This compilation will greatly benefit academics, researchers, advanced students, and practicing engineers in materials and mechanical engineering and related fields who work with biocomposites. Editors Dr. Senthil Muthu Kumar Thiagamani, Kalasalinagam Academy of Research and Education (KARE), India Dr. Md Enamul Hoque, Military Institute of Science and Technology (MIST), Bangladesh Dr. Senthilkumar Krishnasamy, King Mongkut’s University of Technology North Bangkok KMUTNB, Thailand Dr. Chandrasekar Muthukumar, Hindustan Institute of Technology & Science (HITS), India Dr. Suchart Siengchin, King Mongkut’s University of Technology North Bangkok KMUTNB, Thailand

Download or read book Biomaterials Mechanical Properties written by Helen E. Kambic and published by ASTM International. This book was released on 1994 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 23 papers presented at the May 1992 symposium in Pittsburgh, PA. Covers issues in biomaterials science such as polyurethanes, metal components, novel plastics, coatings, bioresorbable materials, and testing methods. Discusses future directions in the field, such as the design and fabricatio

Download or read book Biomaterials Surface Science written by Andreas Taubert and published by John Wiley & Sons. This book was released on 2013-07-23 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the interface of biology, chemistry, and materials science, this book provides an overview of this vibrant research field, treating the seemingly distinct disciplines in a unified way by adopting the common viewpoint of surface science. The editors, themselves prolific researchers, have assembled here a team of top-notch international scientists who read like a "who's who" of biomaterials science and engineering. They cover topics ranging from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices. As a result, the book explains the complex interplay of cell behavior and the physics and materials science of artificial devices. Of equal interest to young, ambitious scientists as well as to experienced researchers.

Download or read book Multi Scale Continuum Mechanics Modelling of Fibre Reinforced Polymer Composites written by Wim Van Paepegem and published by Woodhead Publishing. This book was released on 2020-11-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-scale modelling of composites is a very relevant topic in composites science. This is illustrated by the numerous sessions in the recent European and International Conferences on Composite Materials, but also by the fast developments in multi-scale modelling software tools, developed by large industrial players such as Siemens (Virtual Material Characterization toolkit and MultiMechanics virtual testing software), MSC/e-Xstream (Digimat software), Simulia (micromechanics plug-in in Abaqus), HyperSizer (Multi-scale design of composites), Altair (Altair Multiscale Designer) This book is intended to be an ideal reference on the latest advances in multi-scale modelling of fibre-reinforced polymer composites, that is accessible for both (young) researchers and end users of modelling software. We target three main groups: This book aims at a complete introduction and overview of the state-of-the-art in multi-scale modelling of composites in three axes: • ranging from prediction of homogenized elastic properties to nonlinear material behaviour • ranging from geometrical models for random packing of unidirectional fibres over meso-scale geometries for textile composites to orientation tensors for short fibre composites • ranging from damage modelling of unidirectionally reinforced composites over textile composites to short fibre-reinforced composites The book covers the three most important scales in multi-scale modelling of composites: (i) micro-scale, (ii) meso-scale and (iii) macro-scale. The nano-scale and related atomistic and molecular modelling approaches are deliberately excluded, since the book wants to focus on continuum mechanics and there are already a lot of dedicated books about polymer nanocomposites. A strong focus is put on physics-based damage modelling, in the sense that the chapters devote attention to modelling the different damage mechanisms (matrix cracking, fibre/matrix debonding, delamination, fibre fracture,...) in such a way that the underlying physics of the initiation and growth of these damage modes is respected. The book also gives room to not only discuss the finite element based approaches for multi-scale modelling, but also much faster methods that are popular in industrial software, such as Mean Field Homogenization methods (based on Mori-Tanaka and Eshelby solutions) and variational methods (shear lag theory and more advanced theories). Since the book targets a wide audience, the focus is put on the most common numerical approaches that are used in multi-scale modelling. Very specialized numerical methods like peridynamics modelling, Material Point Method, eXtended Finite Element Method (XFEM), isogeometric analysis, SPH (Smoothed Particle Hydrodynamics),... are excluded. Outline of the book The book is divided in three large parts, well balanced with each a similar number of chapters: