Download or read book Nonlinear Problems in Machine Design written by Eliahu Zahavi and published by CRC Press. This book was released on 2000-12-28 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern machine design challenges engineers with a myriad of nonlinear problems, among them fatigue, friction, plasticity, and excessive deformation. Today's advanced numerical computer programs bring optimal solutions to these complex problems within reach, but not without a trained and experienced overseer. Nonlinear Problems in Machine Des

Download or read book Intelligent Observer and Control Design for Nonlinear Systems written by Dierk Schröder and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented monograph focuses on a novel and complex type of control systems. Written on an engineering level, including fundamentals, advanced methods and applications, the book applies techniques originating from new methods such as artificial intelligence, fuzzy logic, neural networks etc.

Download or read book Design Analysis written by David E. Thompson and published by Cambridge University Press. This book was released on 1999-01-13 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A 1999 text for graduate students and practising engineers, introducing mathematical modeling of engineering systems.

Download or read book Nonlinear Design FETs and HEMTs written by Peter H. Ladbrooke and published by Artech House. This book was released on 2021-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its continuing popularity, the so-called standard circuit model of compound semiconductor field-effect transistors (FETs) and high electron mobility transistors (HEMTs) is shown to have a limitation for nonlinear analysis and design: it is valid only in the static limit. When the voltages and currents are time-varying, as they must be for these devices to have any practical use, the model progressively fails for higher specification circuits. This book shows how to reform the standard model to render it fully compliant with the way FETs and HEMTs actually function, thus rendering it valid dynamically. Proof-of-principle is demonstrated for several practical circuits, including a frequency doubler and amplifiers with demanding performance criteria. Methods for extracting both the reformulated model and the standard model are described, including a scheme for re-constructing from S-parameters the bias-dependent dynamic (or RF) I(V) characteristics along which devices work in real-world applications, and as needed for the design of nonlinear circuits using harmonic-balance and time-domain simulators. The book includes a historical review of how variations on the standard model theme evolved, leading up to one of the most widely used—the Angelov (or Chalmers) model.

Download or read book Robust Nonlinear Control Design written by Randy A. Freeman and published by Springer Science & Business Media. This book was released on 2009-05-21 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This softcover book summarizes Lyapunov design techniques for nonlinear systems and raises important issues concerning large-signal robustness and performance. The authors have been the first to address some of these issues, and they report their findings in this text. The researcher who wishes to enter the field of robust nonlinear control could use this book as a source of new research topics. For those already active in the field, the book may serve as a reference to a recent body of significant work. Finally, the design engineer faced with a nonlinear control problem will benefit from the techniques presented here.

Download or read book Quantitative Feedback Design of Linear and Nonlinear Control Systems written by Oded Yaniv and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative Feedback Design of Linear and Nonlinear Control Systems is a self-contained book dealing with the theory and practice of Quantitative Feedback Theory (QFT). The author presents feedback synthesis techniques for single-input single-output, multi-input multi-output linear time-invariant and nonlinear plants based on the QFT method. Included are design details and graphs which do not appear in the literature, which will enable engineers and researchers to understand QFT in greater depth. Engineers will be able to apply QFT and the design techniques to many applications, such as flight and chemical plant control, robotics, space, vehicle and military industries, and numerous other uses. All of the examples were implemented using Matlab® Version 5.3; the script file can be found at the author's Web site. QFT results in efficient designs because it synthesizes a controller for the exact amount of plant uncertainty, disturbances and required specifications. Quantitative Feedback Design of Linear and Nonlinear Control Systems is a pioneering work that illuminates QFT, making the theory - and practice - come alive.

Download or read book Nonlinear Control Systems Design 1995 written by A.J. Krener and published by Elsevier. This book was released on 2016-01-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series of IFAC Symposia on Nonlinear Control Systems provides the ideal forum for leading researchers and practitioners who work in the field to discuss and evaluate the latest research and developments. This publication contains the papers presented at the 3rd IFAC Symposium in the series which was held in Tahoe City, California, USA.

Download or read book Observer Design for Nonlinear Dynamical Systems written by Driss Boutat and published by Springer. This book was released on 2022-07-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a differential geometric method for designing nonlinear observers for multiple types of nonlinear systems, including single and multiple outputs, fully and partially observable systems, and regular and singular dynamical systems. It is an exposition of achievements in nonlinear observer normal forms. The book begins by discussing linear systems, introducing the concept of observability and observer design, and then explains the difficulty of those problems for nonlinear systems. After providing foundational information on the differential geometric method, the text shows how to use the method to address observer design problems. It presents methods for a variety of systems. The authors employ worked examples to illustrate the ideas presented. Observer Design for Nonlinear Dynamical Systems will be of interest to researchers, graduate students, and industrial professionals working with control of mechanical and dynamical systems.

Download or read book Control and Observer Design for Nonlinear Finite and Infinite Dimensional Systems written by Thomas Meurer and published by Springer Science & Business Media. This book was released on 2005-09-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a well balanced combination of state-of-the-art theoretical results in the field of nonlinear controller and observer design, combined with industrial applications stemming from mechatronics, electrical, (bio–) chemical engineering, and fluid dynamics. The unique combination of results of finite as well as infinite–dimensional systems makes this book a remarkable contribution addressing postgraduates, researchers, and engineers both at universities and in industry. The contributions to this book were presented at the Symposium on Nonlinear Control and Observer Design: From Theory to Applications (SYNCOD), held September 15–16, 2005, at the University of Stuttgart, Germany. The conference and this book are dedicated to the 65th birthday of Prof. Dr.–Ing. Dr.h.c. Michael Zeitz to honor his life – long research and contributions on the fields of nonlinear control and observer design.

Download or read book Nonlinear Microwave Circuit Design written by Franco Giannini and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design techniques for nonlinear microwave circuits are much less developed than for linear microwave circuits. Until now there has been no up-to-date text available in this area. Current titles in this field are considered outdated and tend to focus on analysis, failing to adequately address design and measurement aspects. Giannini and Leuzzi provide the theoretical background to non-linear microwave circuits before going on to discuss the practical design and measurement of non-linear circuits and components. Non-linear Microwave Circuit Design reviews all of the established analysis and characterisation techniques available and provides detailed coverage of key modelling methods. Practical examples are used throughout the text to emphasise the design and application focus of the book. Provides a unique, design-focused, coverage of non-linear microwave circuits Covers the fundamental properties of nonlinear circuits and methods for device modelling Outlines non-linear measurement techniques and characterisation of active devices Reviews available design methodologies for non-linear power amplifiers and details advanced software modelling tools Provides the first detailed treatment of non-linear frequency multipliers, mixers and oscillators Focuses on the application potential of non-linear components Practicing engineers and circuit designers working in microwave and communications engineering and designing new applications, as well as senior undergraduates, graduate students and researchers in microwave and communications engineering and their libraries will find this a highly rewarding read.

Download or read book Nonlinear Control Systems Design 1989 written by A. Isidori and published by Elsevier. This book was released on 2014-05-23 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades, the development of specific methodologies for the control of systems described by nonlinear mathematical models has attracted an ever increasing interest. New breakthroughs have occurred which have aided the design of nonlinear control systems. However there are still limitations which must be understood, some of which were addressed at the IFAC Symposium in Capri. The emphasis was on the methodological developments, although a number of the papers were concerned with the presentation of applications of nonlinear design philosophies to actual control problems in chemical, electrical and mechanical engineering.

Download or read book Stability Analysis and Nonlinear Observer Design using Takagi Sugeno Fuzzy Models written by Zsófia Lendek and published by Springer Science & Business Media. This book was released on 2010-10-27 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many problems in decision making, monitoring, fault detection, and control require the knowledge of state variables and time-varying parameters that are not directly measured by sensors. In such situations, observers, or estimators, can be employed that use the measured input and output signals along with a dynamic model of the system in order to estimate the unknown states or parameters. An essential requirement in designing an observer is to guarantee the convergence of the estimates to the true values or at least to a small neighborhood around the true values. However, for nonlinear, large-scale, or time-varying systems, the design and tuning of an observer is generally complicated and involves large computational costs. This book provides a range of methods and tools to design observers for nonlinear systems represented by a special type of a dynamic nonlinear model -- the Takagi--Sugeno (TS) fuzzy model. The TS model is a convex combination of affine linear models, which facilitates its stability analysis and observer design by using effective algorithms based on Lyapunov functions and linear matrix inequalities. Takagi--Sugeno models are known to be universal approximators and, in addition, a broad class of nonlinear systems can be exactly represented as a TS system. Three particular structures of large-scale TS models are considered: cascaded systems, distributed systems, and systems affected by unknown disturbances. The reader will find in-depth theoretic analysis accompanied by illustrative examples and simulations of real-world systems. Stability analysis of TS fuzzy systems is addressed in detail. The intended audience are graduate students and researchers both from academia and industry. For newcomers to the field, the book provides a concise introduction dynamic TS fuzzy models along with two methods to construct TS models for a given nonlinear system

Download or read book Optimal Experimental Design for Non Linear Models written by Christos P. Kitsos and published by Springer Science & Business Media. This book was released on 2014-01-09 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the Optimal Non-Linear Experimental Design problem from an applications perspective. At the same time it offers extensive mathematical background material that avoids technicalities, making it accessible to non-mathematicians: Biologists, Medical Statisticians, Sociologists, Engineers, Chemists and Physicists will find new approaches to conducting their experiments. The book is recommended for Graduate Students and Researchers.

Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.

Download or read book Computer aided Nonlinear Control System Design written by Amir Nassirharand and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic computer-aided approach provides a versatile setting for the control engineer to overcome the complications of controller design for highly nonlinear systems. This book provides such an approach based on the use of describing functions.

Download or read book Analysis and Design of Nonlinear Control Systems written by Alessandro Astolfi and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tribute to Prof. Alberto Isidori on the occasion of his 65th birthday. Prof. Isidori’s proli?c, pioneering and high-impact research activity has spanned over 35 years. Throughout his career, Prof. Isidori has developed ground-breaking results, has initiated researchdirections and has contributed towardsthe foundationofnonlinear controltheory.In addition,his dedication to explain intricate issues and di?cult concepts in a simple and rigorous way and to motivate young researchers has been instrumental to the intellectual growth of the nonlinear control community worldwide. The volume collects 27 contributions written by a total of 52 researchers. The principal author of each contribution has been selected among the - searchers who have worked with Prof. Isidori, have in?uenced his research activity, or have had the privilege and honour of being his PhD students. The contributions address a signi?cant number of control topics, including th- retical issues, advanced applications, emerging control directions and tutorial works. The diversity of the areas covered, the number of contributors and their international standing provide evidence of the impact of Prof. Isidori in the control and systems theory communities. The book has been divided into six parts: System Analysis, Optimization Methods, Feedback Design, Regulation, Geometric Methods and Asymptotic Analysis, re?ecting important control areas which have been strongly in- enced and, in some cases, pioneered by Prof. Isidori.

Download or read book Nonlinear Power Flow Control Design written by Rush D. Robinett III and published by Springer Science & Business Media. This book was released on 2011-08-10 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an innovative control system design process motivated by renewable energy electric grid integration problems. The concepts developed result from the convergence of research and development goals which have important concepts in common: exergy flow, limit cycles, and balance between competing power flows. A unique set of criteria is proposed to design controllers for a class of nonlinear systems. A combination of thermodynamics with Hamiltonian systems provides the theoretical foundation which is then realized in a series of connected case studies. It allows the process of control design to be viewed as a power flow control problem, balancing the power flowing into a system against that being dissipated within it and dependent on the power being stored in it – an interplay between kinetic and potential energies. Human factors and the sustainability of self-organizing systems are dealt with as advanced topics.