Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir's fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. - Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas - Sharpen your reservoir models with added content on how to tune EOS parameters accurately - Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil

Download or read book Phase Behavior of Petroleum Reservoir Fluids written by Karen Schou Pedersen and published by CRC Press. This book was released on 2006-11-01 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phase behavior of the various fluids present in a petroleum reservoir is essential for achieving optimal design and cost-effective operations in a petroleum processing plant. Taking advantage of the authors' experience in petroleum processing under challenging conditions, Phase Behavior of Petroleum Reservoir Fluids introdu

Download or read book Transport Behavior and Fate of Volatile Organic Compounds in Streams written by R. E. Rathbun and published by . This book was released on 1998 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.

Download or read book Paleozoic Stratigraphy and Resources of the Michigan Basin written by G. Michael Grammer and published by Geological Society of America. This book was released on 2018-04-12 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Michigan Basin is a classic intracratonic basin that has played a significant role in the fundamental understanding of geological processes in such basins, and has been an important resource for oil and gas, economic minerals, groundwater, and coal. Despite the classic nature of the Michigan Basin, there has not been a "special volume" dedicated to the basin in nearly 25 years. Since that time, new advancements in the geological sciences, particularly the utilization of high-resolution sequence stratigraphy and three-dimensional geostatistical modeling, have led to a new and more comprehensive understanding of the Paleozoic sedimentary packages of the Michigan Basin. This volume provides significant new insights of the Michigan Basin to both academic and applied geoscientists; it includes papers that discuss various aspects of the sedimentology and stratigraphy of key units within the basin, as well as papers that analyze the diverse distribution of natural resources present in this basin.

Download or read book Introduction To Carbon Capture And Sequestration written by Berend Smit and published by World Scientific. This book was released on 2014-01-10 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to provide an understanding of the current science underpinning Carbon Capture and Sequestration (CCS) and to provide students and interested researchers with sufficient background on the basics of Chemical Engineering, Material Science, and Geology that they can understand the current state of the art of the research in the field of CCS. In addition, the book provides a comprehensive discussion of the impact of CCS on the energy landscape, society, and climate as these topics govern the success of the science being done in this field.The book is aimed at undergraduate students, graduate students, scientists, and professionals who would like to gain a broad multidisciplinary view of the research that is being carried out to solve one of greatest challenges of our generation.

Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.

Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. - Starts from the basics and builds up to more complex systems - Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels - Multidisciplinary approach: bringing together and unifying phenomena from different fields - This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)

Download or read book Bioavailability of Contaminants in Soils and Sediments written by National Research Council and published by National Academies Press. This book was released on 2003-05-03 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioavailability refers to the extent to which humans and ecological receptors are exposed to contaminants in soil or sediment. The concept of bioavailability has recently piqued the interest of the hazardous waste industry as an important consideration in deciding how much waste to clean up. The rationale is that if contaminants in soil and sediment are not bioavailable, then more contaminant mass can be left in place without creating additional risk. A new NRC report notes that the potential for the consideration of bioavailability to influence decision-making is greatest where certain chemical, environmental, and regulatory factors align. The current use of bioavailability in risk assessment and hazardous waste cleanup regulations is demystified, and acceptable tools and models for bioavailability assessment are discussed and ranked according to seven criteria. Finally, the intimate link between bioavailability and bioremediation is explored. The report concludes with suggestions for moving bioavailability forward in the regulatory arena for both soil and sediment cleanup.

Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.

Download or read book Applications of Molecular Simulation in the Oil and Gas Industry written by Philippe Ungerer and published by Editions TECHNIP. This book was released on 2005 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular simulation is an emerging technology for determining the properties of many systems that are of interest to the oil and gas industry, and more generally to the chemical industry. Based on a universally accepted theoretical background, molecular simulation accounts for the precise structure of molecules in evaluating their interactions. Taking advantage of the availability of powerful computers at moderate cost, molecular simulation is now providing reliable predictions in many cases where classical methods (such as equations of state or group contribution methods) have limited prediction capabilities. This is particularly useful for designing processes involving toxic components, extreme pressure conditions, or adsorption selectivity in microporous adsorbents. Molecular simulation moreover provides a detailed understanding of system behaviour. As illustrated by their award from the American Institute of Chemical Engineers for the best overall performance at the Fluid Simulation Challenge 2004, the authors are recognized experts in Monte Carlo simulation techniques, which they use to address equilibrium properties. This book presents these techniques in sufficient detail for readers to understand how simulation works, and describes many applications for industrially relevant problems. The book is primarily dedicated to chemical engineers who are not yet conversant with molecular simulation techniques. In addition, specialists in molecular simulation will be interested in the large scope of applications presented (including fluid properties, fluid phase equilibria, adsorption in zeolites, etc.).Contents: 1. Introduction. 2. Basics of Molecular Simulation. 3. Fluid Phase Equilibria and Fluid Properties. 4. Adsorption. 5. Conclusion and Perspectives. Appendix

Download or read book Adsorption and Phase Behaviour in Nanochannels and Nanotubes written by Lawrence J. Dunne and published by Springer Science & Business Media. This book was released on 2009-09-24 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Channels of nanotubular dimensions exist in a variety of materials (examples are carbon nanotubes and the nanotubular channels of zeolites and zeotypes) and show promise for numerous applications due to their unique properties. One of their most important properties is their capacity to adsorb molecules and these may exist in a variety of phases. "Adsorption and Phase Behaviour in Nanochannels and Nanotubes" provides an excellent review of recent and current work on adsorption on nanometerials. It is an impressive collection of papers dealing with the adsorption and phase behaviour in nanoporous materials from both experimental and theoretical perspectives. "Adsorption and Phase Behaviour in Nanochannels and Nanotubes" focuses on carbon nanotubes as well as zeolites and related materials.

Download or read book The Oil Bubble written by Samuel P. Irvin and published by . This book was released on 1868 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Carbon Adsorption of Organics from the Aqueous Phase written by I. H. Suffet and published by . This book was released on 1980 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2016-02-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Enhanced Recovery Methods for Heavy Oil and Tar Sands, Second Edition, explores the importance of enhanced oil recovery (EOR) and how it has grown in recent years thanks to the increased need to locate unconventional resources such as heavy oil and shale. Unfortunately, petroleum engineers and managers aren't always well-versed in the enhancement methods that are available when needed or the most economically viable solution to maximize their reservoir's productivity. This revised new edition presents all the current methods of recovery available, including the pros and cons of each. Expanded and updated as a great preliminary text for the newcomer to the industry or subject matter, this must-have EOR guide teaches all the basics needed, including all thermal and non-thermal methods, along with discussions of viscosity, sampling, and the technologies surrounding offshore applications. - Enables users to quickly learn how to choose the most efficient recovery method for their reservoir while evaluating economic conditions - Presents the differences between each method of recovery with newly added real-world case studies from around the world - Helps readers stay competitive with the growing need of extracting unconventional resources with new content on how these complex reservoirs interact with injected reservoir fluids

Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index

Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.