Download or read book Nondestructive Testing and Evaluation of Fiber reinforced Composite Structures written by Shuncong Zhong and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Testing and Evaluation of Fiber Reinforced Composite Structures written by Shuncong Zhong and published by Springer Nature. This book was released on 2022-04-01 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed description of the most common nondestructive testing(NDT) techniques used for the testing and evaluation fiber-reinforced composite structures, during manufacturing and/or in service stages. In order to facilitate the understanding and the utility of the different NDT techniques presented, the book first provides some information regarding the defects and material degradation mechanisms observed in fiber-reinforced composite structures as well as their general description and most probable causes. It is written based on the extensive scientific research and engineering backgrounds of the authors in the NDT and structural health monitoring (SHM) of structural systems from various areas including electrical, mechanical, materials, civil and biomedical engineering. Pursuing a rigorous approach, the book establishes a fundamental framework for the NDT of fiber-reinforced composite structures, while emphasizing on the importance of technique’s spatial resolution, integrated systems analysis and the significance of the influence stemming from the applicability of the NDT and the physical parameters of the test structures in the selection and utilization of adequate NDT techniques. The book is intended for students who are interested in the NDT of fiber-reinforced composite structures, researchers investigating the applicability of different NDT techniques to the inspections of structural systems, and NDT researchers and engineers working on the optimization of NDT systems for specific applications involving the use of fiber-reinforced composite structures.
Download or read book Composites Evaluation written by J. Herriot and published by Butterworth-Heinemann. This book was released on 2015-12-04 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites Evaluation contains the proceedings of the Second International Conference on Testing, Evaluation and Quality Control of Composites-TEQC 87, held at the University of Surrey, UK on September 22-24, 1987. The papers review the physical and chemical properties of composites and the testing and evaluation of these materials. This monograph is comprised of 29 chapters split into nine sections, organized around the themes of nondestructive testing, fatigue testing, impact testing, processing-property relationships, acoustic emission, fracture, mechanical tests, and specialized test equipment and assessment of in-service behavior. The first chapter deals with the nondestructive testing of welds in continuous carbon fiber reinforced thermoplastics, while the second focuses on the use of an automated coin-tap technique for the nondestructive testing of composite structures. The chapters that follow explore hysteresis measurement for obtaining characteristic quantities during dynamic fatigue; real-time recording of impact experiments on composite laminates; the use of statistical methods for determining design data for advanced composite materials; and the strain dependence of elastic modulus in unidirectional composites. The final chapter describes a methodical approach for studying and predicting polymer fiber composite serviceability influenced by cold climate factors. This text will appeal to mechanical and structural engineers as well as materials scientists and technologists.
Download or read book Non Destructive Testing of Fibre Reinforced Plastics Composites written by J. Summerscales and published by Springer Science & Business Media. This book was released on 1990-09-30 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Destructive Evaluation NDE of Polymer Matrix Composites written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2013-06-30 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas.Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four.With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. - Explores a range of NDE and NDT techniques and considers future trends - Examines in detail NDE techniques for adhesively bonded applications - Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring
Download or read book A Technology Assessment of Nondestructive Evaluation NDE of Advanced Fiber Reinforced Polymer Composites written by H. Thomas Yolken and published by . This book was released on 2001 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Testing in Composite Materials written by Carosena Meola and published by MDPI. This book was released on 2020-12-04 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this era of technological progress and given the need for welfare and safety, everything that is manufactured and maintained must comply with such needs. We would all like to live in a safe house that will not collapse on us. We would all like to walk on a safe road and never see a chasm open in front of us. We would all like to cross a bridge and reach the other side safely. We all would like to feel safe and secure when taking a plane, ship, train, or using any equipment. All this may be possible with the adoption of adequate manufacturing processes, with non-destructive inspection of final parts and monitoring during the in-service life of components. Above all, maintenance should be imperative. This requires effective non-destructive testing techniques and procedures. This Special Issue is a collection of some of the latest research in these areas, aiming to highlight new ideas and ways to deal with challenging issues worldwide. Different types of materials and structures are considered, different non-destructive testing techniques are employed with new approaches for data treatment proposed as well as numerical simulations. This can serve as food for thought for the community involved in the inspection of materials and structures as well as condition monitoring.
Download or read book Non destructive Testing of Impact Damage in Fiber reinforced Polymer Composites written by Milad Saeedifar and published by Elsevier. This book was released on 2024-08-08 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive Testing of Impact Damage in Fiber-reinforced Polymer Composites: Fundamentals and Applications provides detailed knowledge on the fundamentals and applications of frequently used nondestructive testing (NDT) techniques utilized to assess impact damage in composite structures. This book starts with an introduction to impact damage in composite structures, each subsequent chapter focuses on evaluating damage using specific NDT methods. Chapters 2–4 concentrate on vision-based NDT methods such as visual inspection, digital image correlation, and digital shearography. Following this, Chapters 5–6 delve into ultrasound-based methods, including acoustic emission and phased-array ultrasonic inspection. Radiation-based methods, micro-CT, and thermography are discussed in Chapters 7 and 8, while Chapters 9 and 10 elucidate microwave inspection and electrical impedance tomography. This book is a useful reference for both academia and industry and covers the fundamentals, practical tips, case studies, and applications, as well as current research trends and future possibilities, for each technique. - Insights into the diverse damage levels in composite materials resulting from low-velocity impact, ranging from micro matrix cracks to severe delamination and fiber breakage - Covers a broad range of NDT techniques, including recently developed NDT techniques, suitable for detecting impact damage in composite materials - Serves as a valuable reference for both academia and industry, providing comprehensive coverage of fundamental principles, practical insights, applications, case studies, current research trends, and future prospects for each NDT technique
Download or read book Nondestructive Testing of Materials and Structures written by Oral Büyüköztürk and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition assessment and characterization of materials and structures by means of nondestructive testing (NDT) methods is a priority need around the world to meet the challenges associated with the durability, maintenance, rehabilitation, retrofitting, renewal and health monitoring of new and existing infrastructures including historic monuments. Numerous NDT methods that make use of certain components of the electromagnetic and acoustic spectrum are currently in use to this effect with various levels of success and there is an intensive worldwide research effort aimed at improving the existing methods and developing new ones. The knowledge and information compiled in this book captures the current state of the art in NDT methods and their application to civil and other engineering materials and structures. Critical reviews and advanced interdisciplinary discussions by world-renowned researchers point to the capabilities and limitations of the currently used NDT methods and shed light on current and future research directions to overcome the challenges in their development and practical use. In this respect, the contents of this book will equally benefit practicing engineers and researchers who take part in characterization, assessment and health monitoring of materials and structures.
Download or read book Handbook of Composites written by S.T. Peters and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Destructive Evaluation of Advanced Fiber Reinforced Polymer Composites written by H. Thomas Yolken and published by . This book was released on 2001-08 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyclic Deformation Fracture and Nondestructive Evaluation of Advanced Materials written by Michael R. Mitchell and published by ASTM International. This book was released on 1994 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the initiation and growth of fatigue cracks and the fracture toughness of advanced materials such as silicon nitride, special alloys and steels, thermoplastics, and graphite-epoxy composites; and explains several non-destructive techniques to evaluate such materials for manufacturing defect
Download or read book Non destructive Testing of Materials in Civil Engineering written by Krzysztof Schabowicz and published by MDPI. This book was released on 2019-11-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was proposed and organized as a means to present recent developments in the field of nondestructive testing of materials in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of nondestructive testing of different materials in civil engineering—from building materials to building structures. The current trend in the development of nondestructive testing of materials in civil engineering is mainly concerned with the detection of flaws and defects in concrete elements and structures, and acoustic methods predominate in this field. As in medicine, the trend is towards designing test equipment that allows one to obtain a picture of the inside of the tested element and materials. From this point of view, interesting results with significance for building practices have been obtained
Download or read book Ultrasonic Nondestructive Evaluation of Adhesively Bonded Fiber Reinforced Composite Structures written by Vasanthy Sivasundaram and published by . This book was released on 1982 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Testing Techniques for Structural Composites written by and published by . This book was released on 1989 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers
