Download or read book Nondestructive Methods for Material Property Determination written by C.O. Ruud and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in materials property determination by nondestructive means is increasing especially for in-process and in-service inspection of structural and electronic materials and components. Such attention is due to several factors, including increased automation of manufacturing processes, the demand for greater reliability in consumer products and military hardware, and more severe demands on the performance of materials. This book represents the proceedings for the Symposium on Nondestructive Hethods for Haterial Property Determination held April 6 to 8, 1983, at the Hotel Hershey in Hershey, Pennsylvania. That symposium was one of the first meetings concerned specifically with nondestructive material property determination (characteriza tion). Its purpose was to stimulate intercourse between researchers, engineers, and theoreticians so as to focus upon the multidiseiplinary problems of advancing the state of the art in this area. The papers in the book are concerned mainly with acoustic (including ultrasonic), magnetic, electrical, and x-ray diffraction techniques and applications. Hany of the papers describe well developed technologies that are currently in practical application, while others discuss concepts which will never emerge from the laboratory but perhaps will provide the groundwork for more practical ideas.
Download or read book Nondestructive Methods for Material Property Determination Proceedings written by Robert E. Green and published by . This book was released on 1984 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.
Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques Reviews the determination of microstructural and mechanical properties Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
Download or read book Nondestructive Characterization of Materials II written by Jean F. Bussière and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possibility of nondestructively characterizing the microstruc ture, morphology or mechanical properties of materials is certainly a fascinating subject. In principle, such techniques can be used at all stages of a material's life - from the early stages of processing, to the end of a structural component's useful life. Interest in the subject thus arises not only from a purely scientific point of view but is also strongly motivated by economic pressures to improve productivity and quality in manufacturing, to insure the reliability and extend the life of existing structures. The present volume represents the edited papers presented at the Second International Symposium on the Nondestructive Characterization of Materials, held in Montreal, Canada, July 21-23, 1986. The Proceedings are divided into eight sections, which reflect the multidisciplinary nature of characterizing materials nondestructively: Polymers and Composites, Ceramics and Powder Metallurgy, Metals, Layered Structures/Adhesive Bonds/Welding, Degradation/Aging, Texture/ Anisotropy, Stress, and New Techniques. Invited papers by R. Hadcock of Grumman Aircraft Systems, R. Cannon of Rutgers University, H. Yada of Nippon Steel and R. Bridenbaugh of Alcoa review respectively the processing of polymer matrix composites, ceramics, steel and aluminum, emphasizing the need for material property sensors to improve process and quality control. Two other invited papers, one by A. Wedgwood of Harwell and the other by P. Holler of the IzFP in Saarbrucken review state of the art techniques to characterize particulate matter and metals respectively.
Download or read book Structural and Residual Stress Analysis by Nondestructive Methods written by V. Hauk and published by Elsevier. This book was released on 1997-11-10 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of stress analysis has gained its momentum from the widespread applications in industry and technology and has now become an important part of materials science. Various destructive as well as nondestructive methods have been developed for the determination of stresses. This timely book provides a comprehensive review of the nondestructive techniques for strain evaluation written by experts in their respective fields. The main part of the book deals with X-ray stress analysis (XSA), focussing on measurement and evaluation methods which can help to solve the problems of today, the numerous applications of metallic, polymeric and ceramic materials as well as of thin-film-substrate composites and of advanced microcomponents. Furthermore it contains data, results, hints and recommendations that are valuable to laboratories for the certification and accreditation of their stress analysis. Stress analysis is an active field in which many questions remain unsettled. Accordingly, unsolved problems and conflicting results are discussed as well. The assessment of the experimentally determined residual and structural stress states on the static and dynamic behavior of materials and components is handled in a separate chapter. Students and engineers of materials science and scientists working in laboratories and industries will find this book invaluable.
Download or read book Nondestructive Evaluation written by Don E. Bray and published by CRC Press. This book was released on 2018-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nondestructive evaluation (NDE) inspection schemes are important in design, manufacturing, and maintenance. By correctly applying techniques of NDE, we can reduce machine and system failures and increase reliability of operating systems over an extended lifetime. Nondestructive Evaluation: A Tool in Design, Manufacturing, and Service introduces and discusses primary techniques used in the field, including ultrasonics, acoustic emission, magnetics, radiography, penetrants, and eddy currents. Examples of each of these techniques are included, demonstrating typical applications.
Download or read book Acousto Ultrasonics written by J. Duke and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finding and slzmg cracks and other crack-like discontinuities has been the center of attention for scientists and engineers developing and using nondestructive evaluation (NDE) technology. However, with advanced mate rials being "engineered" and used in critical structural components, a new for NDE has emerged. Whereas many traditional engineering materi challenge als fail due to the initiation and self-similar propagation of a crack, reinforced composite materials degrade and fail in a manner more analogously to the collapse of a structure. Consequently the NDE of such materials involves assessing the combined effect of the material's damaged condition rather than identifying and sizing single critical imperfection. In 1979 Alex Vary, seeking to address the challenge confronting the NDE of advanced fiber reinforced composite materials began work on a new method of materials characterization. Focusing on the problem of evaluating graphite fiber reinforcedl epoxy laminated plates; Vary used a piezoelectric transducer to excite a mechanical disturbance in a plate and, with a sensi tive piezoelectric transducer monitored the disturbance on the same surface of the plate. (Placing the transducers on the same surface was primarily for practical purpose but their displacement in the direction of anticipated service load was of fundamental significance!) To quantify this observation, he counted the number of excursions, of the resulting electrical signal, above a arbitrary voltage threshold; a procedure frequently used for acoustic emission signal analysis.
Download or read book Materials Characterization for Process Control and Product Confromity written by Klaus Goebbels and published by CRC Press. This book was released on 1994-09-20 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nondestructive testing (NDT) is used to examine the ability of materials and components to withstand loads. Two features of NDT are defect inspection and materials characterization. Because of the increasing ability to manufacture materials and products "defect free" there is less need for defect-oriented NDT but an increasing need for materials characterization. This book is the first comprehensive work on materials characterization, presenting the state of the art and practical applications. Materials characterization is used during production, operations, service intervals, or after repairs. Materials are used to withstand mechanical, thermal, chemical, and irradiation loads-or a combination thereof. The ability to withstand these loads is essentially a function of parameters like chemical composition, microstructure, macrostructure, residual stresses, and materials properties. The physical background of NDT is presented along with its different methods. Ultrasonics, electromagnetics, and X-rays are treated with appropriate detail, while other methods such as acoustic emission, vibration analysis, optical, and thermal methods are also covered. The different methods of materials characterization are discussed following the goal parameters, from atomic to macroscopic dimensions. One of the practical features of the book is the presentation of real world applications. On-line process control and condition monitoring are discussed, as well as off-line applications for materials characterization after production and after operation.
Download or read book International Advances in Nondestructive Testing written by Warren J. McGonnagle and published by CRC Press. This book was released on 1989 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Characterization of Materials written by Paul Höller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is "bearable"? First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.
Download or read book Development of NDT Methods for Advanced Metallic Composite Materials written by George Martin and published by . This book was released on 1970 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is the technical summary of a 15-month study into the application of nondestructive test (NDT) methods to determine the mechanical properties of metal matrix composites. A number of NDT methods aimed at the direct evaluation of mechanical properties were developed. These methods were vibration tests, ultrasonic velocity and attenuation measurement, and acoustic emission. All methods gave very promising results and correlations and are potentially capable of development into industrial test systems. An analytic study of defect characterization in these materials indicates an inherently wide property scatter and indicates the theoretical effects of filament misalinement and filament breaks and of delamination. An industry survey was conducted and the general conclusions indicate a growing interest in complex shapes, which present no basic problems but require adaptation of instrumentation. (Author, modified-PL).
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lewis Structures Technology 1988 written by and published by . This book was released on 1988 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Characterization of Materials VI written by Robert E. Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally the vast majority of materials characterization techniques have been destructive, e. g. , chemical compositional analysis, metallographic determination of microstructure, tensile test measurement of mechanical properties, etc. Also, traditionally, nondestructive techniques have been used almost exclusively for the detection of macroscopic defects, mostly cracks, in structures and devices which have already been constructed and have already been in service for an extended period of time. Following these conventional nondestructive tests, it has been common practice to use somewhat arbitrary accept-reject criteria to decide whether or not the structure or device should be removed from service. The present unfavorable status of a large segment of industry, coupled with the desire to keep structures in service well past their original design life, dramatically show that our traditional approaches must be drastically modified if we are to be able to meet future needs. The role of nondestructive characterization of materials is changing and will continue to change dramatically. It has become increasingly evident that it is both practical and cost effective to expand the role of nondestructive evaluation to include all aspects of materials' production and application and to introduce it much earlier in the manufacturing cycle. In fact, the recovery of a large portion of industry from severe economic problems is dependent, in part, on the successful implementation of this expanded role.
Download or read book Advanced Polymeric Materials written by Gabriel O. Shonaike and published by CRC Press. This book was released on 2003-04-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from experts at some of the world's leading academic and industrial institutions, Advanced Polymeric Materials: Structure Property Relationships brings into book form a wealth of information previously available primarily only within computer programs. In a welcome narrative treatment, it provides comprehensive coverage of p
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
