Download or read book Nondestructive Characterization of Materials VIII written by Robert E. Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Different physical models for the Snoek-type relaxation in ternary systems (Fe-C-Me) are analyzed from the viewpoint of a distance of interatomic interaction taken into account: For non-saturated from the viewpoint of overlapping of interatomic interaction in b.c.c. alloys the physically sufficient and optimal for the computer simulation is the short-range model, which takes into account the interatomic interaction and the average amount of substitutional atoms in the first coordination shell, only. For high alloyed b.c.c. systems (i.e. with the overlapped interatomic interaction) the carbon atom undergoes an interaction of a few substitutional atoms simultaneously. That leads to the appearance of one broadened Snoek peak. Activation energy of such a peak is summed from the "elastic" and "chemical" interatomic interactions. Experimental results for alloys with b.c.c. solid solution structure and its computer simulations allow to introduce the new criterion for the high alloy state of monophase steels: the high alloyed state corresponds to the situation when substitutional atoms can not be considered any longer as the isolated atoms. From the viewpoint of mechanical spectroscopy this situation corresponds to the appearance of one broadened IF Snoek-type peak instead of two peaks existed for the steels with lower substitutional atom concentration.
Download or read book Nondestructive Characterization of Materials X written by R.E. Green and published by Elsevier. This book was released on 2001-03-20 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers published in these peer-reviewed proceedings represent the latest developments in nondestructive characterization of materials and were presented at the Tenth International Symposium on Nondestructive Characterization of Materials held on June 26 - 30, 2000 in Karuizawa, Japan. The symposium was held concurrently with three other symposia and one workshop. This symposium is the tenth in the series that began in 1983 and became an international meeting in 1986.The symposium started with a Plenary Lecture entitled 'Application of Non-contact Ultrasonics to Nondestrctive Characterization of Materials' by Professor R.E. Green, Jr. Various characterization methods were presented at the symposium, including ultrasonics, X-ray, eddy currents, laser, thermal wave, acoustic emission, optical fibers, optics, magnetics and ultrasonic microscope. Thin films and coatings as well as smart materials were also emphasized in this symposium.
Download or read book Nondestructive Characterization of Materials XI written by Robert E. Green and published by Springer Nature. This book was released on 2019-06-12 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers published in these proceedings represent the latest developments in the nondestructive characterization of materials and were presented at the Eleventh International Symposium on Nondestructive Characterization of Materials held in June 2002, in Berlin, Germany.
Download or read book Ultrasonic and Advanced Methods for Nondestructive Testing and Material Characterization written by C. H. Chen and published by World Scientific. This book was released on 2007 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic methods have been very popular in nondestructive testing and characterization of materials. This book deals with both industrial ultrasound and medical ultrasound. The advantages of ultrasound include flexibility, low cost, in-line operation, and providing data in both signal and image formats for further analysis. The book devotes 11 chapters to ultrasonic methods. However, ultrasonic methods can be much less effective with some applications. So the book also has 14 chapters catering to other or advanced methods for nondestructive testing or material characterization. Topics like structural health monitoring, Terahertz methods, X-ray and thermography methods are presented. Besides different sensors for nondestructive testing, the book places much emphasis on signal/image processing and pattern recognition of the signals acquired.
Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative resource for materials properties, their evaluation, and industrial applications The Handbook of Materials Selection provides information and insight that can be employed in any discipline or industry to exploit the full range of materials in use today-metals, plastics, ceramics, and composites. This comprehensive organization of the materials selection process includes analytical approaches to materials selection and extensive information about materials available in the marketplace, sources of properties data, procurement and data management, properties testing procedures and equipment, analysis of failure modes, manufacturing processes and assembly techniques, and applications. Throughout the handbook, an international roster of contributors with a broad range of experience conveys practical knowledge about materials and illustrates in detail how they are used in a wide variety of industries. With more than 100 photographs of equipment and applications, as well as hundreds of graphs, charts, and tables, the Handbook of Materials Selection is a valuable reference for practicing engineers and designers, procurement and data managers, as well as teachers and students.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2093 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at University of San Diego, San Diego, CA, on July 27 to August 1, 1997. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the National Institute of Standards and Technology, the Federal Aviation Administration, and the National Science Foundation IndustrylUniversity Cooperative Research Centers. This year's Review of Progress in QNDE was attended by approximately 370 participants from the US and many foreign countries who presented a total of approximately 350 papers. As usual, the meeting was divided into 36 sessions with four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications and inspection systems, and methods of inspection science from acoustics to x-rays. The Review continues to experience some fluctuations in size, mostly under pressure from a decrease in funding for NDE research at the US Federal level, but increased participation from foreign laboratories has more than made up the difference. The Review is ideally sized to permit a full-scale overview of the latest developments in a collegial atmosphere that most participants favor. The opening plenary session this year concentrated on advances in imaging technologies and methodologies that have been made in recent years. Dr. K.
Download or read book Acoustical Imaging written by Roman Gr. Maev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the Proceedings of the 26th Symposium on Acoustical Imaging held inWindsor, Ontario, Canada during September 9-12, 2001. This traditional scientific event is recognized as a premier forum for the presentation of advanced research results in both theoretical and experimental development. The lAIS was conceived at a 1967Acoustical Holography meeting in the USA. Since then, these traditional symposia provide an opportunity for specialists who are working in this area to make new acquaintances, renew old friendships and present recent results of their research. Our Symposium has grown significantly in size due to a broad interest in various topics and to the quality of the presentations. For the firsttime in 40 years, the IAIS was held in the province of Ontario in Windsor, Canada's Automotive Capital and City of Roses. The 26th IAIS attracted over 100specialists from 13countries representing this interdisciplinary field in physical acoustics, image processing, applied mathematics, solid-state physics, biology and medicine, industrial applications and quality control technologies. The 26th lAIS was organized in the traditional way with only one addition-a Special Session "History of Acoustical Imaging" with the involvement of such well known scientists as Andrew Briggs, Noriyoshi Chubachi, Robert Green Jr., Joie Jones, Kenneth Erikson, and Bernhard Tittmann. Many of these speakers are well known scientists in their fields and we would like to thank them for making this session extremely successful.
Download or read book Nondestructive Characterization of Materials II written by Jean F. Bussière and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possibility of nondestructively characterizing the microstruc ture, morphology or mechanical properties of materials is certainly a fascinating subject. In principle, such techniques can be used at all stages of a material's life - from the early stages of processing, to the end of a structural component's useful life. Interest in the subject thus arises not only from a purely scientific point of view but is also strongly motivated by economic pressures to improve productivity and quality in manufacturing, to insure the reliability and extend the life of existing structures. The present volume represents the edited papers presented at the Second International Symposium on the Nondestructive Characterization of Materials, held in Montreal, Canada, July 21-23, 1986. The Proceedings are divided into eight sections, which reflect the multidisciplinary nature of characterizing materials nondestructively: Polymers and Composites, Ceramics and Powder Metallurgy, Metals, Layered Structures/Adhesive Bonds/Welding, Degradation/Aging, Texture/ Anisotropy, Stress, and New Techniques. Invited papers by R. Hadcock of Grumman Aircraft Systems, R. Cannon of Rutgers University, H. Yada of Nippon Steel and R. Bridenbaugh of Alcoa review respectively the processing of polymer matrix composites, ceramics, steel and aluminum, emphasizing the need for material property sensors to improve process and quality control. Two other invited papers, one by A. Wedgwood of Harwell and the other by P. Holler of the IzFP in Saarbrucken review state of the art techniques to characterize particulate matter and metals respectively.
Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.
Download or read book Nondestructive Characterization of Materials in Aging Systems Volume 503 written by Robert L. Crane and published by Mrs Proceedings. This book was released on 1998-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 43 papers describe new techniques for characterizing the location and size of cracks, the extent of water absorption in adhesives and other polymers, neutron-induced losses of fracture toughness in reactor steels, and the weathering of concrete. They also present applications to structures that for economic reasons are being used well past their design lives. Special emphasis is given to the structural health of concrete, defects in high- strength aircraft materials, and steels in nuclear reactors. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Non destructive Materials Characterization and Evaluation written by Walter Arnold and published by Springer Nature. This book was released on 2023-07-07 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to non-destructive materials characterization (NDMC) using different non-destructive evaluation techniques. It presents theoretical basis, physical understanding, and technological developments in the field of NDMC with suitable examples for engineering and materials science applications. It is written for engineers and researchers in R&D, design, production, quality assurance, and non-destructive testing and evaluation. The relevance of NDMC is to achieve higher reliability, safety, and productivity for monitoring production processes and also for in-service inspections for detection of degradations, which are often precursors of macro-defects and failure of components. Ultrasonic, magnetic, electromagnetic and X-rays based NDMC techniques are discussed in detail with brief discussions on electron and positron based techniques.
Download or read book Microwave Non Destructive Testing and Evaluation Principles written by R. Zoughi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and millimeter-wave non-destructive testing and evaluation (NDT&E) is generally understood to mean using high-frequency electromagnetic energy to inspect and characterize materials and structures. In spite of possessing some distinct advantages in certain applications to other NDT&E techniques, microwave NDT&E has only found compared limited practical application during the past 45 years. These advantages include lack of a need for contact between the sensor and the object being inspected, the ability to penetrate dielectric materials, and superior sensitivity to certain material constituents and flaws. One factor contributing to this minimal acceptance by the NDT &E community has been a generally poor understanding in this community of the theory and practice that underlie the technology. This situation exists partly because of a paucity of microwave NDT&E textbook and reference material. Some chapters, reviews, and books aimed at filling this need have been published in the past but, for the most part, this material is based on the use of older microwave technology. However, during the past ten years great strides have been made in ternlS of the cost, size, and ease of use of microwave components. In addition, recent advances in modeling and measurement techniques have expanded the range of applications for microwave NDT&E. Such applications include inspecting modern materials such as composites, detecting and characterizing surface flaws, and evaluating the compressive strength of cement structures. These advances have created an urgent need for up-to-date textbook material on this subject.
Download or read book Nondestructive Characterization of Materials written by Paul Höller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is "bearable"? First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.
Download or read book Electromagnetic Nondestructive Evaluation V written by J. Pavon and published by IOS Press. This book was released on 2001 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers on electromagnetic nondestructive evaluation (NDE) techniques. Developments are discussed along with the implications of innovations for future inspection practice. Topics covered include: analytical and numerical modelling of electromagnetic NDE phenomena; solutions to NDE inverse problems; evaluation of material degradation in ferromagnetic structures; advanced sensors; industrial applications of NDE; and benchmark problems and solutions.
Download or read book Intelligent Sensing Technologies for Nondestructive Evaluation written by Seunghee Park and published by MDPI. This book was released on 2018-05-08 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Intelligent Sensing Technologies for Nondestructive Evaluation" that was published in Sensors
Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites VII Volume 33 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2012-11-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of 33 papers deals with mechanical behaviors associated with systems ranging from diamond reinforced silicon carbide to rare earth pyrosilicates. Presented at The Mechanical Behavior and Performance of Ceramics & Composites Symposium in January 2012 during the 36th International Conference on Advanced Ceramics and Composites (ICACC), it offers researchers from around the world the opportunity to explore new and emerging issues in all aspects of the field.
Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-04-27 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements
