Download or read book Non Oxide Technical and Engineering Ceramics written by S. Hampshire and published by Springer. This book was released on 1986 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conferences on technical and engineering ceramics are held with increasing frequency, having become fashionable because the potential of ceramics in profitable growth industries is an urgent matter of considerable debate and discussion. Japanese predictions are that the market value of ceramics will grow 10 at about 10% per annum to reach at least $10 by the end of the century. Seventy per cent of this market will be in electroceramics, applications for which include insulating substrates in integrated circuits, ferroelectric capacitors, piezoelectric oscillators and transdu cers, ferrite magnets, and ion-conducting solid electrolytes and sen sors. All these are oxides, and so are excluded by the title of the Limerick Conference. Why 'Non-oxide'? The other major ceramics potential is in struc tural engineering components and engine applications. Here, the greatest impetus to research and development has been the attempt to produce a ceramic gas turbine. Heat engines become more efficient as their working temperature increases, but nickel-base superalloy en gines have about reached their limit. Compared with metals, ceramics have higher strengths at high temperatures, better oxidation and corrosion resistance, and are also less dense. In general, ceramics have better properties above about 1000°C except in one respect-their inherent brittleness. The work of fracture is therefore much smaller than for metals and so the permitted flaw size is also smaller.
Download or read book Non Oxide Technical and Engineering Ceramics written by S. Hampshire and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conferences on technical and engineering ceramics are held with increasing frequency, having become fashionable because the potential of ceramics in profitable growth industries is an urgent matter of considerable debate and discussion. Japanese predictions are that the market value of ceramics will grow 10 at about 10% per annum to reach at least $10 by the end of the century. Seventy per cent of this market will be in electroceramics, applications for which include insulating substrates in integrated circuits, ferroelectric capacitors, piezoelectric oscillators and transdu cers, ferrite magnets, and ion-conducting solid electrolytes and sen sors. All these are oxides, and so are excluded by the title of the Limerick Conference. Why 'Non-oxide'? The other major ceramics potential is in struc tural engineering components and engine applications. Here, the greatest impetus to research and development has been the attempt to produce a ceramic gas turbine. Heat engines become more efficient as their working temperature increases, but nickel-base superalloy en gines have about reached their limit. Compared with metals, ceramics have higher strengths at high temperatures, better oxidation and corrosion resistance, and are also less dense. In general, ceramics have better properties above about 1000°C except in one respect-their inherent brittleness. The work of fracture is therefore much smaller than for metals and so the permitted flaw size is also smaller.
Download or read book High Performance Non Oxide Ceramics I written by M. Jansen and published by Springer. This book was released on 2003-08-25 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nitrides and carbides of boron and silicon are proving to be an excellent choice when selecting materials for the design of devices that are to be employed under particularly demanding environmental and thermal con- tions. The high degree of cross-linking, due to the preferred coordination numbers of the predominantly covalently bonded constituents equalling or exceeding three, lends these non-oxidic ceramics a high kinetic stability, and is regarded as the microscopic origin of their impressive thermal and mechanical durability. Thus it does not come as a surprise that the chemistry, the physical properties and the engineering of the corresponding binary, ternary, and even quaternary compounds have been the subject of intensive and sustained efforts in research and development. In the five reviews presented in the volumes 101 and 102 of "Structure and Bonding" an attempt has been made to cover both the essential and the most recent advances achieved in this particular field of materials research. The scope of the individual contributions is such as to address both graduate students, specializing in ceramic materials, and all scientists in academia or industry dealing with materials research and development. Each review provides, in its introductory part, the chemical, physical and, to some extent, historical background of the respective material, and then focuses on the most relevant and the most recent achievements.
Download or read book Handbook of Properties of Technical and Engineering Ceramics written by R. Morrell and published by . This book was released on 1985 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Non Oxide Ceramics II written by R. Haubner and published by Springer Science & Business Media. This book was released on 2002-07-03 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nitrides and carbides of boron and silicon are proving to be an excellent choice when selecting materials for the design of devices that are to be employed under particularly demanding environmental and thermal con- tions. The high degree of cross-linking, due to the preferred coordination numbers of the predominantly covalently bonded constituents equalling or exceeding three, lends these non-oxidic ceramics a high kinetic stability, and is regarded as the microscopic origin of their impressive thermal and mechanical durability. Thus it does not come as a surprise that the chemistry, the physical properties and the engineering of the corresponding binary, ternary, and even quaternary compounds have been the subject of intensive and sustained efforts in research and development. In the five reviews presented in the volumes 101 and 102 of "Structure and Bonding" an attempt has been made to cover both the essential and the most recent advances achieved in this particular field of materials research. The scope of the individual contributions is such as to address both graduate students, specializing in ceramic materials, and all scientists in academia or industry dealing with materials research and development. Each review provides, in its introductory part, the chemical, physical and, to some extent, historical background of the respective material, and then focuses on the most relevant and the most recent achievements.
Download or read book 2nd European Symposium on Engineering Ceramics written by F.L. Riley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 2nd European Symposium on Engineering Ceramics held in London, 23-24 November 1987. The meeting was attended by almost 200 scientists and engineers, primarily drawn from industry, and the Sessions were chaired by Mr Eric Briscoe, past President of the Institute of Ceramics. Very effective symposium organisation was provided by IBC Technical Services Ltd. The engineering ceramics are a class of materials which has over some 50 years found well-established applications based on the materials' chemical stability and wear resistance. The last 20 years have seen intensified efforts to extend applications for these materials into areas traditionally occupied by metals, but in which the typical metallic weaknesses of wear, and of high temperature creep and oxidation, are now creating significant problems. These efforts have, however, in many cases been undermined on the one hand by the inherent ceramic weaknesses of brittleness and flaw sensitivity, and on the other by an inadequate understanding, and control, of the basic ceramic fabrication processes required for the low-cost mass production of relatively complex components. The positive results of the efforts of the last 20 years have been the development of a large new group of ceramic materials believed to possess intrinsic mechanical property advantages, of which the transformation toughened zirconias, and the ceramic matrix composites are good examples, together with improved powder production methods and powder shaping processes.
Download or read book High Performance Non Oxide Ceramics II written by M. Jansen and published by Springer. This book was released on 2003-08-25 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nitrides and carbides of boron and silicon are proving to be an excellent choice when selecting materials for the design of devices that are to be employed under particularly demanding environmental and thermal con- tions. The high degree of cross-linking, due to the preferred coordination numbers of the predominantly covalently bonded constituents equalling or exceeding three, lends these non-oxidic ceramics a high kinetic stability, and is regarded as the microscopic origin of their impressive thermal and mechanical durability. Thus it does not come as a surprise that the chemistry, the physical properties and the engineering of the corresponding binary, ternary, and even quaternary compounds have been the subject of intensive and sustained efforts in research and development. In the five reviews presented in the volumes 101 and 102 of "Structure and Bonding" an attempt has been made to cover both the essential and the most recent advances achieved in this particular field of materials research. The scope of the individual contributions is such as to address both graduate students, specializing in ceramic materials, and all scientists in academia or industry dealing with materials research and development. Each review provides, in its introductory part, the chemical, physical and, to some extent, historical background of the respective material, and then focuses on the most relevant and the most recent achievements.
Download or read book Siaions and Non Oxides written by Katsutoshi Komeya and published by Trans Tech Publications. This book was released on 2009-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past fifty years, significant progress has been achieved in the theory and application of SiAlONs and other similar non-oxide ceramics. In particular, the advances of the last thirty years in research and development have made SiAlONs, and similar materials, some of the most important engineering ceramics and new functional ceramics of today. The papers presented in this volume are authored by leading international experts on SiAlON and non-oxide materials and therefore give an excellent overview of current and future trends in the field. The 75 papers selected for the December 2007 symposium report recent research on producing nitride, SiAlON, carbide, and composite ceramics for advanced technology applications. The contributors investigate the sintering shrinkage behavior of silicon nitride ceramics, the dielectric properties of B-SiAlON at high temperatures, polymer-derived SiCN glasses with tailored architectures, and aqueous processing of boron carbide powders. Other topics include the tribological characteristics of carbon nano-fiber dispersed silicon nitride, the preparation of precursors for aluminum nitride-based ceramic composites, oxidation of rare earth silicon oxynitride J-phases, and computation of temperature-pressure phase diagrams for high-pressure nitrides.
Download or read book 3rd European Symposium on Engineering Ceramics written by F.L. Riley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the 3rd European Symposium on Engineering Ceramics, held in London, 28-29 November 1989, under the auspices of IBC Technical Services Ltd. The Symposium sessions were chaired by Eric Briscoe, who also introduced the Symposium with the very appropriate review 'Ceramics in Europe'. The term 'engineering ceramics' is commonly taken to mean a group of special high-strength and heat-resistant ceramic materials developed almost exclusively for the advanced internal combustion engine of the next century. It is not always fully appreciated that high grade fine microstructure ceramics both of the oxide and of the non-oxide classes, whether they be termed engineering, fine, special, advanced, structural or technical, have been supporting a large number of diverse and profitable industries over many decades. Indeed, in some respects these materials can be regarded as natural developments from the long established refractories field, and the distinction between an engineering ceramic and a refractory can become blurred, as the contribution in this volume on 'Nitride Bonded Carbide Engineered Ceramics' shows. It is of significance that in Japan, for example, much development work in the engineering ceramics field was initiated by the refractories industries, seeking to diversify possibly but doing so on the basis oflong experience in the refractories area. The main objective of this Symposium was to help engineers and designers to assess the present state of the field of engineering ceramics.
Download or read book Engineered Ceramics written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2016-02-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book project, all the American Ceramic Society's Engineering Ceramics Division Mueller and Bridge Building Award Winners, the ICACC Plenary Speakers and the past Engineering Ceramics Division Chairs have been invited to write book chapters on a topic that is compatible with their technical interests and consistent with the scope of the book, which is to focus on the current status and future prospects of various technical topics related to engineering ceramics, advanced ceramics and composite materials. Topics include: Mechanical Behavior and Performance of Ceramics & Composites Non-Destructive Evaluation and Mechanical Testing of Engineering Ceramics Brittle and Composite Material Design Modern Fracture Mechanics of Ceramics Thermal/Environmental Barrier Coatings Advanced Ceramic Coatings for Functional Applications Advanced Ceramic Joining Technologies Ceramics for Machining, Friction, Wear, and Other Tribological Applications Ceramic Composites for High-Temperature Aerospace Structures and Propulsion Systems Thermal Protection Materials: From Retrospect to Foresight Carbon/Carbon Composites Ceramic-Matrix Composites for Lightweight Construction Ultra High-Temperature Ceramics (UHTC) Nanolaminated Ternary Carbides and Nitrides (MAX Phases) Ceramics for Heat Engine and Other Energy Related Applications Solid Oxide Fuel Cells (SOFC) Armor Ceramics Next Generation Bioceramics Ceramics for Innovative Energy and Storage Systems Designing Ceramics for Electrochemical Energy Storage Devices Nanostructured Materials and Nanotechnology Advanced Ceramic Processing and Manufacturing Technologies Engineering Porous Ceramics Thermal Management Materials and Technologies Geopolymers Advanced Ceramic Sensor Technology Advanced Ceramics and Composites for Nuclear and Fusion Applications Advanced Ceramic Technologies for Rechargeable Batteries
Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book High Resolution Techniques and Application to Non oxide Ceramics Si Al O N System written by and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructure of ceramic materials can now be observed directly at the atomic level by using high-resolution electron microscopy. These techniques are described in detail, and the type of new information that they are revealing about the structure of ceramics is illustrated with examples drawn from investigations of hot-pressed silicon nitrides, sintered silicon carbide, and a ''Sialon'' system. 15 figures.
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
Download or read book Handbook of Properties of Technical Engineering Ceramics Data reviews sect 1 High alumina ceramics sect 2 Oxide and silicate ceramics sect 3 Non oxide ceramics sect 4 Glasses glass ceramics and miscellaneous materials written by R. Morrell and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Non Oxide Ceramics II written by M. Jansen and published by Springer. This book was released on 2002-07-03 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nitrides and carbides of boron and silicon are proving to be an excellent choice when selecting materials for the design of devices that are to be employed under particularly demanding environmental and thermal con- tions. The high degree of cross-linking, due to the preferred coordination numbers of the predominantly covalently bonded constituents equalling or exceeding three, lends these non-oxidic ceramics a high kinetic stability, and is regarded as the microscopic origin of their impressive thermal and mechanical durability. Thus it does not come as a surprise that the chemistry, the physical properties and the engineering of the corresponding binary, ternary, and even quaternary compounds have been the subject of intensive and sustained efforts in research and development. In the five reviews presented in the volumes 101 and 102 of "Structure and Bonding" an attempt has been made to cover both the essential and the most recent advances achieved in this particular field of materials research. The scope of the individual contributions is such as to address both graduate students, specializing in ceramic materials, and all scientists in academia or industry dealing with materials research and development. Each review provides, in its introductory part, the chemical, physical and, to some extent, historical background of the respective material, and then focuses on the most relevant and the most recent achievements.
Download or read book Engineering Ceramics 96 Higher Reliability through Processing written by G.N. Babini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the significant progress, which has been made in developing of ceramic materials desired for engineering applications, their mass production is still not on expected level. Among the key factors hindering higher exploitation of these materials the problems in processing were identified. The processing comprises powder production, mixing techniques, forming, and sintering. All of them are equally important and all of them can introduce defects into the material. Besides improvement in processing, the properties of ceramic materials can be considerably improved by the creation of composites. Composites formed at micro or macro level are able to form more flaw-tolerant material. Considerable research activities, working on above mentioned phenomena are in progress at industrial laboratories as well as other research centres. This volume presents the contributions to the Advanced Research Workshop "Engineering Ceramics '96" with 65 participants from 21 countries held on 12th - 15th May 1996 at Smolenice Castle, Slovakia, the conference site of Slovak Academy of Sciences. The book covers research activities on engineering ceramic materials and gives an overview with respect to recent developments.