Download or read book High Performance Computing in Science and Engineering 16 written by Wolfgang E. Nagel and published by Springer. This book was released on 2017-01-11 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2016. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.
Download or read book Turbulence Phenomena written by J.T. Davies and published by Elsevier. This book was released on 2012-12-02 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence Phenomena provides an introduction to the eddy transfer of momentum, mass, and heat, specifically at interfaces. The approach of the discussion of the subject matter is based on the eddy mixing length concept of Prandtl. Chapter 1 begins with a discussion on basic concepts regarding liquid flow such as viscosity, turbulent flows, and velocities. As concepts and theories are established, the book then discusses the eddy transfer in fluids, specifically eddy transfer of mass and heat within fluids and eddy transfer near solid surfaces. The concept of eddies in different surfaces is discussed in length all throughout numerous chapters. These different surfaces include clean gas-liquid surfaces, clean liquid-liquid interfaces, and film-covered surfaces. The last few chapters focus on the more detailed discussion on turbulence, such as the concept of spontaneous interfacial turbulence and emulsification and turbulent dispersion and coalescence. The book will be of great use to undergraduate students of chemical engineering, physics, and chemistry.
Download or read book Large Eddy Simulation of Complex Engineering and Geophysical Flows written by Boris Galperin and published by Cambridge University Press. This book was released on 1993-11-26 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1993, this book was the first to offer a comprehensive review of large eddy simulations (LES) - the history, state of the art, and promising directions for research. Among topics covered are fundamentals of LES; LES of incompressible, compressible, and reacting flows; LES of atmospheric, oceanic, and environmental flows; and LES and massivelt parallel computing. The book grew out of an international workshop that, for the first time, brought together leading researchers in engineering and geophysics to discuss developments and applications of LES models in their respective fields. It will be of value to anyone with an interest in turbulence modelling.
Download or read book Viscous Drag Reduction in Boundary Layers written by and published by AIAA. This book was released on 1990 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Elsevier. This book was released on 2011-04-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. * Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. * Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. * Covers both basic rheology and the fluid mechanics of NN fluids ? a truly self-contained reference for anyone studying or working with the processing and handling of fluids
Download or read book Homogeneous Turbulence Dynamics written by Pierre Sagaut and published by Springer. This book was released on 2018-03-23 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art results and theories in homogeneous turbulence, including anisotropy and compressibility effects with extension to quantum turbulence, magneto-hydodynamic turbulence and turbulence in non-newtonian fluids. Each chapter is devoted to a given type of interaction (strain, rotation, shear, etc.), and presents and compares experimental data, numerical results, analysis of the Reynolds stress budget equations and advanced multipoint spectral theories. The role of both linear and non-linear mechanisms is emphasized. The link between the statistical properties and the dynamics of coherent structures is also addressed. Despite its restriction to homogeneous turbulence, the book is of interest to all people working in turbulence, since the basic physical mechanisms which are present in all turbulent flows are explained. The reader will find a unified presentation of the results and a clear presentation of existing controversies. Special attention is given to bridge the results obtained in different research communities. Mathematical tools and advanced physical models are detailed in dedicated chapters.
Download or read book Rheology and Non Newtonian Fluids written by Fridtjov Irgens and published by Springer Science & Business Media. This book was released on 2013-07-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a brief but thorough introduction to the fascinating subject of non-Newtonian fluids, their behavior and mechanical properties. After a brief introduction of what characterizes non-Newtonian fluids in Chapter 1 some phenomena characteristic of non-Newtonian fluids are presented in Chapter 2. The basic equations in fluid mechanics are discussed in Chapter 3. Deformation kinematics, the kinematics of shear flows, viscometric flows, and extensional flows are the topics in Chapter 4. Material functions characterizing the behavior of fluids in special flows are defined in Chapter 5. Generalized Newtonian fluids are the most common types of non-Newtonian fluids and are the subject in Chapter 6. Some linearly viscoelastic fluid models are presented in Chapter 7. In Chapter 8 the concept of tensors is utilized and advanced fluid models are introduced. The book is concluded with a variety of 26 problems. Solutions to the problems are ready for instructors
Download or read book The Structure of Turbulent Shear Flow written by A. A. R. Townsend and published by Cambridge University Press. This book was released on 1976 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.
Download or read book Non Newtonian Flow written by R. P. Chhabra and published by Elsevier. This book was released on 1999-08-19 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian materials are encountered in virtually all of the chemical and process industries and a full understanding of their nature and flow characteristics is an essential requirement for engineers and scientists involved in their formulation and handling. This book will bridge the gap between much of the highly theoretical and mathematically complex work of the rheologist and the practical needs of those who have to design and operate plants in which these materials are handled and processed. At the same time, numerous references are included for the benefit of those who need to delve more deeply into the subject.The starting point for any work on non-newtonian fluids is their characterisation over the range of conditions to which they are likely to be subjected during manufacture or utilisation, and this topic is treated early on in the book in a chapter commissioned from an expert in the field of rheological measurements. Coverage of topics is extensive and this book offers a unique and rich selection of material including the flow of single phase and multiphase mixtures in pipes, in packed and fluidised bed systems, heat and mass transfer in boundary layers and in simple duct flows, and mixing etc.An important and novel feature of the book is the inclusion of a wide selection of worked examples to illustrate the methods of calculation. It also incorporates a large selection of problems for the reader to tackle himself.
Download or read book Maths Physics and Clinical Measurement for Anaesthesia and Intensive Care written by Hozefa Ebrahim and published by Cambridge University Press. This book was released on 2019-10-31 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers essential information on maths, physics and clinical measurement for anaesthesia and critical care.
Download or read book Non Newtonian Flow and Heat Transfer written by A. H. P. Skelland and published by . This book was released on 1967 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micropolar Fluids written by Grzegorz Lukaszewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropolar fluids are fluids with microstructure. They belong to a class of fluids with nonsymmetric stress tensor that we shall call polar fluids, and include, as a special case, the well-established Navier-Stokes model of classical fluids that we shall call ordinary fluids. Physically, micropolar fluids may represent fluids consisting of rigid, randomly oriented (or spherical) particles suspended in a viscous medium, where the deformation of fluid particles is ignored. The model of micropolar fluids introduced in [65] by C. A. Eringen is worth studying as a very well balanced one. First, it is a well-founded and significant generalization of the classical Navier-Stokes model, covering, both in theory and applications, many more phenomena than the classical one. Moreover, it is elegant and not too complicated, in other words, man ageable to both mathematicians who study its theory and physicists and engineers who apply it. The main aim of this book is to present the theory of micropolar fluids, in particular its mathematical theory, to a wide range of readers. The book also presents two applications of micropolar fluids, one in the theory of lubrication and the other in the theory of porous media, as well as several exact solutions of particular problems and a numerical method. We took pains to make the presentation both clear and uniform.
Download or read book Heat and Mass Transfer written by and published by BoD – Books on Demand. This book was released on 2019-09-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and mass transfer is the core science for many industrial processes as well as technical and scientific devices. Automotive, aerospace, power generation (both by conventional and renewable energies), industrial equipment and rotating machinery, materials and chemical processing, and many other industries are requiring heat and mass transfer processes. Since the early studies in the seventeenth and eighteenth centuries, there has been tremendous technical progress and scientific advances in the knowledge of heat and mass transfer, where modeling and simulation developments are increasingly contributing to the current state of the art. Heat and Mass Transfer - Advances in Science and Technology Applications aims at providing researchers and practitioners with a valuable compendium of significant advances in the field.
Download or read book Rheology of Complex Fluids written by Abhijit P. Deshpande and published by Springer Science & Business Media. This book was released on 2010-09-20 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the School on Rheology of Complex fluids is to bring together young researchers and teachers from educational and R&D institutions, and expose them to the basic concepts and research techniques used in the study of rheological behavior of complex fluids. The lectures will be delivered by well-recognized experts. The book contents will be based on the lecture notes of the school.
Download or read book Applied Computational Fluid Dynamics and Turbulence Modeling written by Sal Rodriguez and published by Springer Nature. This book was released on 2019-12-06 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text provides engineering students and practicing professionals with a comprehensive set of practical, hands-on guidelines and dozens of step-by-step examples for performing state-of-the-art, reliable computational fluid dynamics (CFD) and turbulence modeling. Key CFD and turbulence programs are included as well. The text first reviews basic CFD theory, and then details advanced applied theories for estimating turbulence, including new algorithms created by the author. The book gives practical advice on selecting appropriate turbulence models and presents best CFD practices for modeling and generating reliable simulations. The author gathered and developed the book’s hundreds of tips, tricks, and examples over three decades of research and development at three national laboratories and at the University of New Mexico—many in print for the first time in this book. The book also places a strong emphasis on recent CFD and turbulence advancements found in the literature over the past five to 10 years. Readers can apply the author’s advice and insights whether using commercial or national laboratory software such as ANSYS Fluent, STAR-CCM, COMSOL, Flownex, SimScale, OpenFOAM, Fuego, KIVA, BIGHORN, or their own computational tools. Applied Computational Fluid Dynamics and Turbulence Modeling is a practical, complementary companion for academic CFD textbooks and senior project courses in mechanical, civil, chemical, and nuclear engineering; senior undergraduate and graduate CFD and turbulence modeling courses; and for professionals developing commercial and research applications.
Download or read book Three Dimensional Navier Stokes Equations for Turbulence written by Luigi C. Berselli and published by Academic Press. This book was released on 2021-03-10 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Navier-Stokes Equations for Turbulence provides a rigorous but still accessible account of research into local and global energy dissipation, with particular emphasis on turbulence modeling. The mathematical detail is combined with coverage of physical terms such as energy balance and turbulence to make sure the reader is always in touch with the physical context. All important recent advancements in the analysis of the equations, such as rigorous bounds on structure functions and energy transfer rates in weak solutions, are addressed, and connections are made to numerical methods with many practical applications. The book is written to make this subject accessible to a range of readers, carefully tackling interdisciplinary topics where the combination of theory, numerics, and modeling can be a challenge. - Includes a comprehensive survey of modern reduced-order models, including ones for data assimilation - Includes a self-contained coverage of mathematical analysis of fluid flows, which will act as an ideal introduction to the book for readers without mathematical backgrounds - Presents methods and techniques in a practical way so they can be rapidly applied to the reader's own work
Download or read book Non Newtonian Fluids written by William Lionel Wilkinson and published by Pergamon. This book was released on 1960 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
