Download or read book Non Classical Crystallization of Thin Films and Nanostructures in CVD and PVD Processes written by Nong Moon Hwang and published by Springer. This book was released on 2016-06-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to a recently-developed approach to the growth mechanism of thin films and nanostructures via chemical vapour deposition (CVD). Starting from the underlying principles of the low pressure synthesis of diamond films, it is shown that diamond growth occurs not by individual atoms but by charged nanoparticles. This newly-discovered growth mechanism turns out to be general to many CVD and some physical vapor deposition (PVD) processes. This non-classical crystallization is a new paradigm of crystal growth, with active research taking place on growth in solution, especially in biomineralization processes. Established understanding of the growth of thin films and nanostructures is based around processes involving individual atoms or molecules. According to the author’s research over the last two decades, however, the generation of charged gas phase nuclei is shown to be the rule rather than the exception in the CVD process, and charged gas phase nuclei are actively involved in the growth of films or nanostructures. This new understanding is called the theory of charged nanoparticles (TCN). This book describes how the non-classical crystallization mechanism can be applied to the growth of thin films and nanostructures in gas phase synthesis. Based on the author’s graduate lecture course, the book is aimed at senior undergraduate and graduate students and researchers in the field of thin film and nanostructure growth or crystal growth. It is hoped that a new understanding of the growth processes of thin films and nanostructures will reduce trial-and-error in research and in industrial fabrication processes.

Download or read book Chemical Vapor Deposition written by S Neralla and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of chemical vapor deposition (CVD) methods and recent advances in developing novel materials for application in various fields. CVD has now evolved into the most widely used technique for growth of thin films in electronics industry. Several books on CVD methods have emerged in the past, and thus the scope of this book goes beyond providing fundamentals of the CVD process. Some of the chapters included highlight current limitations in the CVD methods and offer alternatives in developing coatings through overcoming these limitations.

Download or read book Nano sized Multifunctional Materials written by and published by Elsevier. This book was released on 2018-11-20 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-sized Multifunctional Materials: Synthesis, Properties and Applications explores how materials can be down-scaled to nanometer-size in order to tailor and control properties. These advanced, low-dimensional materials, ranging from quantum dots and nanoparticles, to ultra-thin films develop multifunctional properties. As well as demonstrating how down-scaling to nano-size can make materials multifunctional, chapters also show how this technology can be applied in electronics, medicine, energy and in the environment. This fresh approach in materials research will provide a valuable resource for materials scientists, materials engineers, chemists, physicists and bioengineers who want to learn more on the special properties of nano-sized materials. Outlines the major synthesis chemical process and problems of advanced nanomaterials Shows how multifunctional nanomaterials can be practically used in biomedical area, nanomedicine, and in the treatment of pollutants Demonstrates how the properties of a variety of materials can be engineered by downscaling them to nano size

Download or read book Handbook of Physical Vapor Deposition PVD Processing written by D. M. Mattox and published by Cambridge University Press. This book was released on 2014-09-19 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the book is on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called ""war stories"", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language.

Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.

Download or read book Environmentally Focused Patterning and Processing of Polymer Thin Films by Initiated Chemical Vapor Deposition iCVD and Oxidative Chemical Vapor Deposition oCVD written by Nathan Jeffrey Trujillo and published by . This book was released on 2010 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new millennium has brought fourth many technological innovations made possible by the advancement of high speed integrated circuits. The materials and energy requirements for a microchip is orders of magnitude higher than that of "traditional" goods, and current materials management requirements for EHS friendly low-k processing require a 10% annual increase in raw materials utilization. Initiated Chemical Vapor Deposition (iCVD) is a low-energy, one step, solvent-free process for producing polymeric thin films This thesis describes the deposition of a novel low-k iCVD precursor, 1,3,5,7-tetravinyltetramethylcylcotetrasiloxane (V4D4). The high degree of organic content in the as-deposited film affords the ability to tune the film's properties by annealing. The incorporation of atmospheric oxygen at high temperatures enhances the mechanical and electrical properties of the films. Films annealed at 410'C have a dielectric constant of 2.15, hardness and modulus of 0.78 GPa and 5.4 GPa, respectively. These values are comparatively better than previously reported results for CVD low-k films. Environmentally friendly low-k processing encompasses materials and energy management in the entire integration process, including lithography. Colloidal lithography was combined with iCVD and capillary force lithography to create spatially addressable grafted polymer pattern nanostructures, without the need for expensive lithography tools. Using this method, we pattern our novel low dielectric constant polymer down to 25 nm without the need for environmentally harmful solvents. Furthermore, these grafted patterns were produced for a broad material set of functional organic, fluorinated, and silicon containing polymers. A variation of this process created amine functionalized biocompatible conducting polymer nanostructure patterns for biosensor applications. These were fabricated using grafting reactions between oxidative chemical vapor deposition (oCVD) PEDOT conducting polymers and amine functionalized polystyrene (PS) colloidal templates. Carboxylate containing oCVD copolymer patterns were used to immobilized fluorescent dyes. Fluorescent colloidal particles were assembled within dyed PEDOT-co-TAA copolymer nanobowl templates to create bifunctional patterns for optical data storage applications. Finally, UV and e-beam lithography were used to pattern covalently tethered vinyl monolayers for resist-free patterning of iCVD and oCVD polymers, using environmentally innocuous solvents.

Download or read book Mesocrystals and Nonclassical Crystallization written by Helmut Cöelfen and published by John Wiley & Sons. This book was released on 2008-07-31 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through both explanation and discussion, this title presents a complete review into mesocrystals, and accurately describes this relatively new study of established materials. This book also provides an introduction to other areas of crystallisation including self-assembly, classical crystallisation and colloidal crystals. Key features: Description of crystals as well as their formation processes and ways to modify them. Examines new ways towards the design of new materials and aids comprehension of the building principles of biominerals. Helps to explain many unusual observations made in the study of crystallisation. Written by the professionals in this subject ‘Mesocrystals: New Self-Assembled Structures’ outlines the future potential of this topic within a variety of disciplines including engineering science, physics and chemistry, making it a versatile and valuable text.

Download or read book Chemical Vapor Deposition of Functional and Conformal Polymer Thin Films for the Formation and Modification of Nanostructures written by Priya Moni and published by . This book was released on 2018 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous mini- and microscale devices require the miniaturization of component devices such as on board integrated circuits (ICs) and electrochemical power sources. A paradigm shift to micro/nanostructured 3D geometries can enable high device performance within a small areal footprint. Fabrication of such devices requires processes to form structures in a material of interest and subsequently modify the structure with additional functional materials. This thesis explores the chemical vapor deposition (CVD) of polymer thin films to enable both the formation and modification of nanostructures. The CVD method allows for simultaneous polymer synthesis and thin film formation. The broad range of applications studied in this thesis all benefit from the single-step, in-situ control of the final polymer functionality and thin film properties enabled by the CVD of polymers. The first portion of this thesis studies the formation of nanostructures for ICs via the directed self-assembly (DSA) of block copolymers (BCPs). Initiated CVD (iCVD) is used to form cross-linked poly(divinyl benzene) (pDVB) films that control the orientation of self-assembled BCPs. The cross-linking mechanism of pDVB is first ascertained to form durable films. In-situ chemical modification of iCVD pDVB is then used to tune the final orientation of the selfassembled BCP film. A conformal iCVD pDVB film is then integrated into existing DSA processes to yield a nano-template that could be used to fabricate nanostructured ICs. The second portion of this thesis studies the modification of nanostructures by active and supporting materials used in electrochemical power systems. The iCVD process is used to develop conformal, solid polymer electrolytes, a supporting material for solid state lithium ion batteries. Out of several multi-vinyl cyclic chemistries, poly(tetravinyltetramethylcyclotetrasiloxane) (pV4D4) films displayed the highest ionic conductivity (10-7 S cm-1) and high conformality. Active materials for supercapacitors were developed using the oxidative chemical vapor deposition (oCVD) of conductive polymers. The oCVD process was used to control the crystallographic texture of poly(3,4-ethylenedioxythiophene) (PEDOT) thin films. Edge-on texture maximized the pseudocapacitive charge storage of this material. Conformal PEDOT thin films on micro-structured current collectors enabled higher energy densities in a high power, asymmetric supercapacitor.

Download or read book Combinatorial Materials Synthesis written by Xiao-Dong Xiang and published by CRC Press. This book was released on 2003-08-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pioneered by the pharmaceutical industry and adapted for the purposes of materials science and engineering, the combinatorial method is now widely considered a watershed in the accelerated discovery, development, and optimization of new materials. Combinatorial Materials Synthesis reveals the gears behind combinatorial materials chemistry and thin-film technology, and discusses the prime techniques involved in synthesis and property determination for experimentation with a variety of materials. Funneling historic innovations into one source, the book explores core approaches to synthesis and rapid characterization techniques for work with combinatorial materials libraries.

Download or read book Achieving Crystalline Perfection Optimizing PVD for Superior Thin Film Quality written by Richard and published by . This book was released on 2024-06-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crystallization and Materials Science of Modern Artificial and Natural Crystals written by Elena Borisenko and published by BoD – Books on Demand. This book was released on 2012-01-20 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal growth is an important process, which forms the basis for a wide variety of natural phenomena and engineering developments. This book provides a unique opportunity for a reader to gain knowledge about various aspects of crystal growth from advanced inorganic materials to inorganic/organic composites, it unravels some problems of molecular crystallizations and shows advances in growth of pharmaceutical crystals, it tells about biomineralization of mollusks and cryoprotection of living cells, it gives a chance to learn about statistics of chiral asymmetry in crystal structure.

Download or read book Advanced Coatings for Buildings written by Anibal C Maury-Ramirez and published by . This book was released on 2020-09-24 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on five Special Issues in Coatings, this e-book contains a series of 15 articles demonstrating actual perspectives and new trends in advanced coatings in buildings. Innovative materials and multiperformance solutions provide a basis, contributing also to the better protection of buildings' surfaces during the service life, and the users' wellbeing.

Download or read book Conformal Polymer Thin Films on Structurally Complex Surfaces by Initiated Chemical Vapor Deposition written by Chia-Yun (Sharon) Hsieh and published by . This book was released on 2016 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Initiated chemical vapor deposition (iCVD) is a novel CVD technique for forming polymer thin films. Compared to traditional thermal and plasma CVD methods, iCVD operates at low substrate temperature and low power conditions. This has the benefit of enabling well-defined reaction pathways for polymerization that lead to stoichiometric polymers. The iCVD approach has been investigated for many polymer chemistries and the resulting iCVD polymers have been shown to possess analogous structures and properties as bulk polymers from liquid phase synthesis. Among iCVD reactions, free radical polymerization is the most common, where vinyl monomers can be polymerized with peroxide free radical initiators. Recently, cationic ring opening polymerization via iCVD was demonstrated by applying boron trifluoride diethyl etherate as a cationic initiator for the polymerization of ethylene oxide. This work will demonstrate for the first time the iCVD synthesis of polyglycidol (PGL) via cationic ring opening polymerization of glycidol. iCVD PGL shows similar structure and properties as liquid-synthesized PGL reported in literature based on spectroscopic analysis. Furthermore, the iCVD deposition behavior under different modes of iCVD polymerization environment - surface-driven, gas-driven, and supersaturation - will be discussed for forming polyglycidol (PGL), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(tetrafluoroethylene) (PTFE) and polyvinylpyrrolidone (PVP) coatings on structurally complex substrates, including nanopores, nanorods, and microstructures. Two major parameters Pm/Psat that represents the ratio of the partial pressure of the monomer to its saturation pressure, and Knudsen number (Kn) will be evaluated and related with the observed deposition behavior. Surface-driven iCVD of PGL and PHEMA have been found to conformally deposit in nanoporous TiO2 and microcatheters by carefully controlling Pm/Psat over a wide range of Kn. However, with gas-driven iCVD of PTFE, although conformal coatings have been achieved on micropillars and nanorods, coating within nanoporous networks at very large Kn was difficult even with careful control of Pm/Psat. It is believed that the PTFE polymerization is significantly driven by gas phase reactions that are not well controlled with a surface Pm/Psat parameter and, by moving to smaller and more confined features, the gas phase chemistries dominate and interfere with surface polymerization. By controlling Pm/Psat > 1, i.e. in a supersaturated monomer state, a recent iCVD processing discovery was made. Under supersaturation conditions, PVP was found to selectively grow on certain material surfaces and not others. This is believed to be due to differences in wettability of the monomer that dictates where the polymer grows, and enables directed patterning through iCVD. With the ability to deposit polymer coatings on different substrates, this work will illustrate a number of applications that highlight iCVD as an enabling technology. iCVD of PHEMA on ventricular catheters is found to be an effective coating for reducing undesired cell attachment in vitro by 77% after 17 days in cultured media compared to bare catheters, and so has the potential for improving catheter viability and reliability. iCVD of PTFE on silicon micropillars and nickel nanorod arrays is able to produce effective non-wetting (superhydrophobic) surface structures for enhancing latent heat transfer. iCVD of PGL in mesoporous TiO2 nanoparticle networks produces polymer nanocomposites with ultrahigh nanofiller loading (>80 wt%), offering a valuable platform for studying polymer nanocomposites with uniform and ultrahigh loading that exceed conventional processing limits (10-15 wt%) due to filler particle aggregation. As a result, the PGL glass transition temperature is found to increase significantly by 50-60 ℗ʻC compared to bulk PGL films without TiO2 nanofiller. The enhanced glass transition is attributed to appreciable hydrogen bonding interactions between PGL and TiO2.

Download or read book Electrophoretic Deposition of Nanomaterials written by James H. Dickerson and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary basic research, emerging technology, and commercial and industrial applications associated with the electrophoretic deposition of nanomaterials. This presentation of the subject includes an historical survey, the underlying theory of electrophoresis, dielectrophoresis, and the colloidal deposition of materials. This is followed by an assessment of the experimental equipment and procedures for electrophoretic and dielectrophoretic aggregation, manipulation, and deposition of nanoparticles, nanotubes, and other nanomaterials. Additional chapters explore the specific science and technology of electrophoretic film formation, using widely studied and application-driven nanomaterials, such as carbon nanotubes, luminescent nanocrystals, and nano-ceramics. The concluding chapters explore industrial applications and procedures associated with electrophoretic deposition of nanomaterials.

Download or read book Springer Handbook of Electronic and Photonic Materials written by Safa Kasap and published by Springer. This book was released on 2017-10-04 with total page 1536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second, updated edition of this essential reference book provides a wealth of detail on a wide range of electronic and photonic materials, starting from fundamentals and building up to advanced topics and applications. Its extensive coverage, with clear illustrations and applications, carefully selected chapter sequencing and logical flow, makes it very different from other electronic materials handbooks. It has been written by professionals in the field and instructors who teach the subject at a university or in corporate laboratories. The Springer Handbook of Electronic and Photonic Materials, second edition, includes practical applications used as examples, details of experimental techniques, useful tables that summarize equations, and, most importantly, properties of various materials, as well as an extensive glossary. Along with significant updates to the content and the references, the second edition includes a number of new chapters such as those covering novel materials and selected applications. This handbook is a valuable resource for graduate students, researchers and practicing professionals working in the area of electronic, optoelectronic and photonic materials.

Download or read book 1D Semiconducting Nanostructures for Flexible and Large Area Electronics written by Dhayalan Shakthivel and published by Cambridge University Press. This book was released on 2019-10-31 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconducting nanostructures such as nanowires (NWs) have been used as building blocks for various types of sensors, energy storage and generation devices, electronic devices and for new manufacturing methods involving printed NWs. The response of these sensing/energy/electronic components and the new fabrication methods depends very much on the quality of NWs and for this reason it is important to understand the growth mechanism of 1D semiconducting nanostructures. This is also important to understand the compatibility of NW growth steps and tools used in the process with these unconventional substrates such as plastic that are used in flexible and large area electronics. Therefore, this Element presents at length discussion about the growth mechanisms, growth conditions and the tools used for the synthesis of NWs. Although NWs from Si, ZnO and carbon nanotubes (CNTs) are included, the discussion is generic and relevant to several other types of NWs as well as heterostructures.

Download or read book Plasma Enhanced Layer by layer Deposition and Nano crystallization of Si H Films written by Zhuo (Carol). Chen and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-crystalline Si (nc-Si) is a promising candidate for photovoltaic applications due to its better stability compared to amorphous Si, and relatively easy to manufacture at low cost, by plasma enhanced chemical vapor deposition (PECVD), compared to single crystal Si. The crystalline volume fraction of nc-Si films needs to be well controlled to prevent light-induced degradation of the otherwise amorphous hydrogenated Si (a-Si:H). A layer-by-layer technique using two separate plasma sources for a-Si:H deposition and nano-crystallization was developed. A capacitively-coupled plasma (CCP) with SiH4/He feed gas was used to deposit thin a-Si:H layers that were subsequently exposed to a H2 or D2 inductively-coupled plasma (ICP) to induce crystallization in the films. Deposition and nano-crystallization were performed sequentially and periodically to grow thin films. Raman spectroscopy was used to characterize the films and determine the fraction of crystalline. The crystalline volume fraction obtained in this work ranged from 0% to 72%. Many short exposures (20 s or 5 s) to the plasmas were more effective in producing nano-crystalline Si compared to one long exposure (40 min. or 4 min.). In addition, the fraction of nano-crystalline Si increased with increasing H2 ICP-to-SiH4/He CCP exposure time ratio (from 1/4 to 3/2). The crystallites had columnar structure along the film growth direction based on transmission electron microscopy (TEM). Etching of films by the D2 plasma was monitored by mass spectrometry. At 250 oC, the amorphous Si etching rate (0.25 nm/min) was much lower than the deposition rate (1.4 nm/min), and that etching did not occur exclusively on the surface or the near surface region. The blueshift (by about 1 eV) of the dielectric constants peak, found by spectroscopic ellipsometry (SE), suggested the formation of nano-crystallites in the bulk of the films. It is proposed that by tailoring the CCP deposition time as well as the H2 ICP exposure time per cycle, the crystalline fraction and crystallite size of the resulting films can be controlled for more stable solar cell materials. Further, by spatially separating film deposition and nano-crystallization, each of these processes can be individually optimized, providing flexibility in controlling film nanostructure and properties