Download or read book Noise in Solid State Devices and Circuits written by Albert Van der Ziel and published by Wiley-Interscience. This book was released on 1986-05-13 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives basic and up-to-date information about noise sources in electronic devices. Demonstrates how this information can be used to calculate the noise performance, in particular the noise figure, of electronic circuits using these devices. Optimization procedures, both for the circuits and for the devices, are then devised based on these data. Gives an elementary treatment of thermal noise, diffusion noise, and velocity-fluctuation noise, including quantum effects in thermal noise and maser noise.
Download or read book Noise in High Frequency Circuits and Oscillators written by Burkhard Schiek and published by John Wiley & Sons. This book was released on 2006-07-14 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classroom-tested book addressing key issues of electrical noise This book examines noise phenomena in linear and nonlinear high-frequency circuits from both qualitative and quantitative perspectives. The authors explore important noise mechanisms using equivalent sources and analytical and numerical methods. Readers learn how to manage electrical noise to improve the sensitivity and resolution of communication, navigation, measurement, and other electronic systems. Noise in High-Frequency Circuits and Oscillators has its origins in a university course taught by the authors. As a result, it is thoroughly classroom-tested and carefully structured to facilitate learning. Readers are given a solid foundation in the basics that allows them to proceed to more advanced and sophisticated themes such as computer-aided noise simulation of high-frequency circuits. Following a discussion of mathematical and system-oriented fundamentals, the book covers: * Noise of linear one- and two-ports * Measurement of noise parameters * Noise of diodes and transistors * Parametric circuits * Noise in nonlinear circuits * Noise in oscillators * Quantization noise Each chapter contains a set of numerical and analytical problems that enable readers to apply their newfound knowledge to real-world problems. Solutions are provided in the appendices. With their many years of classroom experience, the authors have designed a book that is ideal for graduate students in engineering and physics. It also addresses key issues and points to solutions for engineers working in the burgeoning satellite and wireless communications industries.
Download or read book Analysis and Simulation of Noise in Nonlinear Electronic Circuits and Systems written by Alper Demir and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In electronic circuit and system design, the word noise is used to refer to any undesired excitation on the system. In other contexts, noise is also used to refer to signals or excitations which exhibit chaotic or random behavior. The source of noise can be either internal or external to the system. For instance, the thermal and shot noise generated within integrated circuit devices are in ternal noise sources, and the noise picked up from the environment through electromagnetic interference is an external one. Electromagnetic interference can also occur between different components of the same system. In integrated circuits (Ies), signals in one part of the system can propagate to the other parts of the same system through electromagnetic coupling, power supply lines and the Ie substrate. For instance, in a mixed-signal Ie, the switching activity in the digital parts of the circuit can adversely affect the performance of the analog section of the circuit by traveling through the power supply lines and the substrate. Prediction of the effect of these noise sources on the performance of an electronic system is called noise analysis or noise simulation. A methodology for the noise analysis or simulation of an electronic system usually has the following four components: 2 NOISE IN NONLINEAR ELECTRONIC CIRCUITS • Mathematical representations or models for the noise sources. • Mathematical model or representation for the system that is under the in fluence of the noise sources.
Download or read book Low Noise Wide Band Amplifiers in Bipolar and CMOS Technologies written by Zhong Yuan Chong and published by Springer Science & Business Media. This book was released on 1990-11-30 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design has grown in importance because so many circuits cannot be realized with digital techniques. Examples are receiver front-ends, particle detector circuits, etc. Actually, all circuits which require high precision, high speed and low power consumption need analog solutions. High precision also needs low noise. Much has been written already on low noise design and optimization for low noise. Very little is available however if the source is not resistive but capacitive or inductive as is the case with antennas or semiconductor detectors. This book provides design techniques for these types of optimization. This book is thus intended firstly for engineers on senior or graduate level who have already designed their first operational amplifiers and want to go further. It is especially for engineers who do not want just a circuit but the best circuit. Design techniques are given that lead to the best performance within a certain technology. Moreover, this is done for all important technologies such as bipolar, CMOS and BiCMOS. Secondly, this book is intended for engineers who want to understand what they are doing. The design techniques are intended to provide insight. In this way, the design techniques can easily be extended to other circuits as well. Also, the design techniques form a first step towards design automation. Thirdly, this book is intended for analog design engineers who want to become familiar with both bipolar and CMOS technologies and who want to learn more about which transistor to choose in BiCMOS.
Download or read book Noise in Semiconductor Devices written by Fabrizio Bonani and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of the physical basis of noise in semiconductor devices, and a detailed treatment of numerical noise simulation in small-signal conditions. It presents innovative developments in the noise simulation of semiconductor devices operating in large-signal quasi-periodic conditions.
Download or read book Low Frequency Noise in Advanced MOS Devices written by Martin Haartman and published by Springer Science & Business Media. This book was released on 2007-08-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to noise, describing fundamental noise sources and basic circuit analysis, discussing characterization of low-frequency noise and offering practical advice that bridges concepts of noise theory and modelling, characterization, CMOS technology and circuits. The text offers the latest research, reviewing the most recent publications and conference presentations. The book concludes with an introduction to noise in analog/RF circuits and describes how low-frequency noise can affect these circuits.
Download or read book Noise in Electronic Devices and Systems written by M.J. Buckingham and published by . This book was released on 1985 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Microwave Circuits written by Stephen A. Maas and published by Wiley-IEEE Press. This book was released on 1997 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text is an excellent resource and time-saver for engineers who need to tackle troublesome nonlinear components that remain in use despite recent advances in microwave technology. NONLINEAR MICROWAVE CIRCUITS offers detailed, technically substantial coverage of key methods for the analysis, design, and optimization of nonlinear microwave circuits. Using minimal mathematics, it integrates in-depth, "readable" coverage of the underlying theories that guide these methods. This book is replete with valuable "how to" information on a wide range of topics.
Download or read book A Guide to Noise in Microwave Circuits written by Peter Heymann and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: A GUIDE TO NOISE IN MICROWAVE CIRCUITS A fulsome exploration of critical considerations in microwave circuit noise In A Guide to Noise in Microwave Circuits: Devices, Circuits, and Measurement, a team of distinguished researchers deliver a comprehensive introduction to noise in microwave circuits, with a strong focus on noise characterization of devices and circuits. The book describes fluctuations beginning with their physical origin and touches on the general description of noise in linear and non-linear circuits. Several chapters are devoted to the description of noise measurement techniques and the interpretation of measured data. A full chapter is dedicated to noise sources as well, including thermal, shot, plasma, and current. A Guide to Noise in Microwave Circuits offers examples of measurement problems—like low noise block (LNB) of satellite television – and explores equipment and measurement methods, like the Y, cold source, and 7-state method. This book also includes: A thorough introduction to foundational terms in microwave circuit noise, including average values, amplitude distribution, autocorrelation, cross-correlation, and noise spectra Comprehensive explorations of common noise sources, including thermal noise, the Nyquist formula and thermal radiation, shot noise, plasma noise, and more Practical discussions of noise and linear networks, including narrowband noise In-depth examinations of calculation methods for noise quantities, including noise voltages, currents, and spectra, the noise correlation matrix, and the noise of simple passive networks Perfect for graduate students specializing in microwave and wireless electronics, A Guide to Noise in Microwave Circuits: Devices, Circuits, and Measurement will also earn a place in the libraries of professional engineers working in microwave or wireless circuits and system design.
Download or read book Electronic Noise and Interfering Signals written by Gabriel Vasilescu and published by Springer Science & Business Media. This book was released on 2006-01-17 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Noise and Interfering Signals is a comprehensive reference book on noise and interference in electronic circuits, with particular focus on low-noise design. The first part of the book deals with mechanisms, modelling, and computation of intrinsic noise which is generated in every electronic device. The second part analyzes the coupling mechanisms which can lead to a contamination of circuits by parasitic signals and provides appropriate solutions to this problem. The last part contains more than 100 practical, elaborate case studies. The book requires no advanced mathematical training as it introduces the fundamental methods. Moreover, it provides insight into computational noise analysis with SPICE and NOF, a software developed by the author. The book addresses designers of electronic circuits as well as researchers from electrical engineering, physics, and material science. It should also be of interest for undergraduate and graduate students.
Download or read book Fundamentals of RF Circuit Design written by Jeremy Everard and published by John Wiley & Sons. This book was released on 2001-02-08 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The art of RF circuit design made simple... Radio Frequency circuits are the fundamental building blocks in a vast array of consumer electronics and wireless communication devices. Jeremy Everard's unique combination of theory and practice provides insight into the principles of operation, together with invaluable guidance to developing robust and long-lasting circuit designs. Features include: * Simplified approach to RF circuit theory and device modelling using algebraic approximations to illustrate the important underlying principles. * A comprehensive design guide to low noise oscillators backed by a full theoretical treatment, based on the author's latest research, and including extensive design examples. * Key concepts of broad and narrow band small signal amplifiers, mixers, and high-efficiency broadband power amplifier design. * How to develop large signal circuit models with simulation and tuning in real time. * Charts of performance parameters for RF chip components. Advanced undergraduate and postgraduate students in RF and microwave circuit design will benefit from the practical and highly illustrative approach. Design and research engineers and industrial technical managers, will appreciate the basic and detailed theory, analysis, design and operation of RF and microwave circuits.
Download or read book Noise Coupling in System on Chip written by Thomas Noulis and published by CRC Press. This book was released on 2018-01-09 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise Coupling is the root-cause of the majority of Systems on Chip (SoC) product fails. The book discusses a breakthrough substrate coupling analysis flow and modelling toolset, addressing the needs of the design community. The flow provides capability to analyze noise components, propagating through the substrate, the parasitic interconnects and the package. Using this book, the reader can analyze and avoid complex noise coupling that degrades RF and mixed signal design performance, while reducing the need for conservative design practices. With chapters written by leading international experts in the field, novel methodologies are provided to identify noise coupling in silicon. It additionally features case studies that can be found in any modern CMOS SoC product for mobile communications, automotive applications and readout front ends.
Download or read book Noise and Fluctuations Control in Electronic Devices written by Alexander A. Balandin and published by Amer Scientific Pub. This book was released on 2002-01-01 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Fluctuations Control in Electronic Devices is the first single reference source to bring together the latest aspects of noise research for a wide range of multidisciplinary audiences. The goal of this book is to give an update of state-of-the-art in this interdisciplinary field, while focusing on new trends in electronic device noise research. Such new trends include investigation of noise in electronic devices based on novel materials, effects of the downscaling on the device noise performance, fluctuations and noise control in nanodevices, effective methods of noise control and suppression, etc. In addition, the book presents a historic overview of the development of the kinetic theory of fluctuation, essential for understanding of the present state-of-the art. This book contains 18 state-of-the-art review chapters written by 33 internationally renowned experts from 15 countries. This book has about 1,500 bibliographical citations and hundreds of illustrations, figures, tables and equations. This book is a definite reference source for students, scientists, engineers, and specialists both in academia and industry working in such different fields as electronic and optoelectronic devices, electrical and electronic engineering, solid-state physics, nanotechnology, wireless communication, telecommunication, and semiconductor device technology.
Download or read book High Frequency Integrated Circuits written by Sorin Voinigescu and published by Cambridge University Press. This book was released on 2013-02-28 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: A transistor-level, design-intensive overview of high speed and high frequency monolithic integrated circuits for wireless and broadband systems from 2 GHz to 200 GHz, this comprehensive text covers high-speed, RF, mm-wave, and optical fibre circuits using nanoscale CMOS, SiGe BiCMOS, and III-V technologies. Step-by-step design methodologies, end-of chapter problems, and practical simulation and design projects are provided, making this an ideal resource for senior undergraduate and graduate courses in circuit design. With an emphasis on device-circuit topology interaction and optimization, it gives circuit designers and students alike an in-depth understanding of device structures and process limitations affecting circuit performance.
Download or read book Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation written by Robert B. Northrop and published by CRC Press. This book was released on 2003-12-29 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic mathematical tools used to describe noise and its propagation through linear systems and provides a basic description of the improvement of signal-to-noise ratio by signal averaging and linear filtering. The text also demonstrates how op amps are the keystone of modern analog signal conditioning systems design, and il
Download or read book Electronic Noise and Low Noise Design written by Peter J. Fish and published by McGraw-Hill Companies. This book was released on 1994 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radio Frequency Electronics written by Jon B. Hagen and published by Cambridge University Press. This book was released on 2009-06-11 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamentals applying to all radio devices, this is a perfect introduction to the subject for students and professionals.
