Download or read book Noise in the Plastics Processing Industry written by Robert Peters and published by CRC Press. This book was released on 2018-09-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Regulation-focused Considers machinery and processes as well as the workforce

Download or read book Noise in the Plastics Processing Industry written by Bob Peters and published by Smithers Rapra. This book was released on 2017-11-10 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an updated and revised version of a book published by RAPRA in 1985 'Noise in the Plastics Processing Industry'. The original version provided guidance to managers and engineers in the plastics industry on ways to reduce high noise levels in the workplace, in order to reduce risk of noise induced hearing damage to employees. Practical methods for reducing noise from industrial machinery in general were described and then illustrated with 25 case studies all relating to plastics processing machines such a granulators, shredders, extruders and injection moulders.Noise control techniques described include standard noise control measures such as enclosures, silencers and the use of sound insulating, sound absorbing materials, use of vibration isolation and damping. Most of these techniques have not changed since 1985, however one new technique is now available - the use of active noise control methods. The scope of the revised text has been extended to include chapters on environmental noise, European Union machinery noise emission regulations, hearing protection and prediction of noise levels, and the design of quieter workplaces.A new chapter of case studies has been added which reviews many already published case studies and introduces some new ones.

Download or read book Cost Management in Plastics Processing written by Robin Kent and published by Elsevier. This book was released on 2017-09-29 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Fourth Edition, makes readers think about current practices and how to go forward with effective cost management. This is a practical workbook that provides a structured approach to reducing costs in plastics processing for all the major plastics shaping processes (moulding, extrusion, forming) as well as elsewhere in the company (e.g., in factory services and non-manufacturing areas). Competition in all manufacturing sectors is increasing, and there is continuous pressure to drive costs down and to increase cost management. Good cost management improves profits and margins, improves management control and opens the door to becoming a world-class company. The approach throughout this book looks rigorously at where costs are incurred and proposes projects and targets for cost reduction. This book is designed to provide a well-structured map broken down into simple tasks and achievable goals. This book offers a structured approach to the techniques of cost management, from how costs are calculated by accountants, to the effective use of machines and labor, to the minimization of waste. It begins by looking at traditional methods of accounting and costing and whether these are helpful or accurate for project management. Practical examples of cost management in plastics processing are included, together with many useful flow charts and diagrams to illustrate the points under discussion. - Enables plastics processors to institute an effective cost management system, going beyond simply trying to cut costs - Provides a holistic perspective on cost management, shining a light on areas on costs which may not have previously been considered or accounted for, and proposing projects and targets for cost reduction - Serves as a route map to help companies move toward improved margins and greater profitability

Download or read book Plastics and Rubber International written by and published by . This book was released on 1979 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extruding Plastics written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.

Download or read book Processing and Finishing of Polymeric Materials 2 Volume Set written by Wiley and published by John Wiley & Sons. This book was released on 2012-12-03 with total page 1477 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the processing and finishing of polymeric materials for scientists and practitioners Owing to their versatility and wide range of applications, polymeric materials are of great commercial importance. Manufacturing processes of commercial products are designed to meet the requirements of the final product and are influenced by the physical and chemical properties of the polymeric material used. Based on Wiley's renowned Encyclopedia of Polymer Science and Technology, Processing and Finishing of Polymeric Materials provides comprehensive, up-to-date details on the latest manufacturing technologies, including blending, compounding, extrusion,molding, and coating. Written by prominent scholars from industry, academia, and research institutions from around the globe, this reference features more than forty selected reprints from the Encyclopedia as well as new contributions, providing unparalleled coverage of such topics as: Additives Antistatic agents Bleaching Blowing agents Calendaring Casting Coloring processes Dielectric heating Electrospinning Embedding Processing and Finishing of Polymeric Materials is an ideal resource for polymer and materials scientists, chemists, chemical engineers, materials scientists, process engineers, and consultants, and serves as a valuable addition to libraries of chemistry, chemical engineering, and materials science in industry, academia, and government.

Download or read book Encyclopaedia of Occupational Health and Safety written by Jeanne Mager Stellman and published by International Labour Organization. This book was released on 1998 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technology for a Quieter America written by National Academy of Engineering and published by National Academies Press. This book was released on 2010-10-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exposure to noise at home, at work, while traveling, and during leisure activities is a fact of life for all Americans. At times noise can be loud enough to damage hearing, and at lower levels it can disrupt normal living, affect sleep patterns, affect our ability to concentrate at work, interfere with outdoor recreational activities, and, in some cases, interfere with communications and even cause accidents. Clearly, exposure to excessive noise can affect our quality of life. As the population of the United States and, indeed, the world increases and developing countries become more industrialized, problems of noise are likely to become more pervasive and lower the quality of life for everyone. Efforts to manage noise exposures, to design quieter buildings, products, equipment, and transportation vehicles, and to provide a regulatory environment that facilitates adequate, cost-effective, sustainable noise controls require our immediate attention. Technology for a Quieter America looks at the most commonly identified sources of noise, how they are characterized, and efforts that have been made to reduce noise emissions and experiences. The book also reviews the standards and regulations that govern noise levels and the federal, state, and local agencies that regulate noise for the benefit, safety, and wellness of society at large. In addition, it presents the cost-benefit trade-offs between efforts to mitigate noise and the improvements they achieve, information sources available to the public on the dimensions of noise problems and their mitigation, and the need to educate professionals who can deal with these issues. Noise emissions are an issue in industry, in communities, in buildings, and during leisure activities. As such, Technology for a Quieter America will appeal to a wide range of stakeholders: the engineering community; the public; government at the federal, state, and local levels; private industry; labor unions; and nonprofit organizations. Implementation of the recommendations in Technology for a Quieter America will result in reduction of the noise levels to which Americans are exposed and will improve the ability of American industry to compete in world markets paying increasing attention to the noise emissions of products.

Download or read book Control for Aluminum Production and Other Processing Industries written by Mark P. Taylor and published by CRC Press. This book was released on 2013-10-23 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: An uncomfortable observation in the Shift Logs and Process Control records of most aluminum smelting plants is that process control failures, large and small, happen every day. Although only a small fraction of these failures give rise to catastrophic events, the difference between a disaster we read about and a failure which, although expensive, has no irreversible consequences, is only chance. Control for Aluminum Production and Other Processing Industries exemplifies new control thinking fused with an understanding of process variability, and how to diagnose abnormalities and their causes in aluminum production plants. Many real life examples in the book demonstrate the importance of human behavior and a scientific, questioning approach in the control of a technologically complex process. Written from the perspective of production staff and management, the book also gives readers a view into the human aspects of accidents and their analogy with failures in control of production. Production plants regularly experience more control failures than successes and staff must continuously strive to establish stability and control of their process. Through on-the-job experiences of the authors and their industry colleagues, the control experiences described in this book provide readers with a foundation for building their own robust control rationale and a framework for avoidance of plant control problems.

Download or read book Energy Management in Plastics Processing written by Robin Kent and published by Elsevier. This book was released on 2018-07-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Third Edition, addresses energy benchmarking and site surveys, how to understand energy supplies and bills, and how to measure and manage energy usage and carbon footprinting. The book's approach highlights the need to reduce the kWh/kg of materials processed and the resulting permanent reductions in consumption and costs. Every topic is covered in a 2-page spread, providing the reader with clear actions and key tips for success. This revised third edition covers new developments in energy management, power supply considerations, automation, assembly operations, water footprinting, and transport considerations, and more. Users will find a practical workbook that not only shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming), but also provides tactics that will benefit other locations in plants (e.g. in factory services and nonmanufacturing areas). - Enables plastics processors in their desire to institute an effective energy management system, both in processing and elsewhere in the plant - Provides a holistic perspective, shining a light on areas where energy management methods may have not been previously considered - Acts as a roadmap to help companies move towards improved sustainability and cost savings

Download or read book Environmental Science Class Xii General Ed written by Mani and published by Foundation Books. This book was released on 2006-05-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook on environmental science has been specially designed for students of Class XII. It introduces them to the basic concepts of environmental science using an inter-disciplinary approach. The major themes handled in the book are: Population and Conservation of Ecology Planning for Environmental Conservation and Protection Technology and Environment Environmental Pollution Action on Atmosphere Legal Regimes for Sustainable Development Key features Extensive coverage of topics Lucid presentation in simple language Iluustrations, cartoons and photographs to complement explanation of concepts Special section to aid revision and consolidation Activities to reinforce and apply concepts Exercises for self-evaluation and self-assessment Answer key to select questions

Download or read book Manufacturing Service Industries written by Great Britain. HM Factory Inspectorate and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concise Encyclopedia of Plastics written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: After over a century of worldwide production of all kinds trol persons, cost estimators, buyers, vendors, consultants, of products, the plastics industry is now the fourth largest and others. industry in the United States. This brief, concise, and prac The bulk of the book is the alphabetical listing of en tical book is a cutting edge compendium of the plastics tries. Preceding those entries is A Plastics Overview: Fig industry's information and terminology-ranging from ures and Tables (which presents eight summary guides on design, materials, and processes, to testing, quality control, the subjects examined in the text) and then the World of regulations, legal matters, and profitability. New and use Plastics Reviews (which presents 14 articles that provide ful developments in plastic materials and processing con general introductory information, comprehensive updates, tinually are on the horizon, and the examples of these de and important networking avenues within the world of velopments that are discussed in the book provide guides plastics). Following the alphabetical listing of entries, at the to past and future trends. end of the encyclopedia, seven appendices provide back This practical and comprehensive book reviews the ground and source guide information keyed to the text of the book. The extensive and useful Appendix A, List of plastics industry virtually from A to Z through its more than 25,000 entries. Its concise entries cover the basic is Abbreviations, lists all abbreviations used in the text.

Download or read book CIS Abstracts written by International Occupational Safety and Health Information Centre and published by . This book was released on 1985 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Institute of America Plastics Engineering Manufacturing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements in different environments to reducing costs and targeting for zero defects. This book provides the reader with useful pertinent information readily available as summarized in the Table of Contents, List of References and the Index.

Download or read book Small Business Manufacturing and Work Force Capability written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Technology and Competitiveness and published by . This book was released on 1992 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 1550 pages. Available in PDF, EPUB and Kindle. Book excerpt: