Download or read book NMR Spectroscopy and Polymer Microstructure written by Alan E. Tonelli and published by Wiley-VCH. This book was released on 1989 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes both high resolution solution and solid state techniques; presents applications to synthetic and biological polymers; demonstrates the connection between microstructures, conformations, and NMR spectra of polymers. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book NMR Spectroscopy of Polymers written by Tatsuki Kitayama and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the authors ́ extensive experimental experience, NMR Spectroscopy of Polymers explains the practical use of NMR spectroscopy in polymer chemistry.

Download or read book NMR Spectroscopy of Polymers written by R.N. Ibbett and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: R.N.IBBETT This book provides a source of information on all major aspects of NMR spectroscopy of synthetic polymers. It represents a deliberate attempt to pull together the numerous strands of the subject in a single comprehensive volume, designed to be readable at every scientific level. It is intended that the book will be of use to the vast majority of polymer scientists and NMR spec troscopists alike. Readers new to NMR will find extensive information within the book on the available techniques, allowing full exploration of the many polymer science applications. Readers already established within a branch of NMR will find the book an excellent guide to the practical study of polymers and the inter pretation of experimental data. Readers who have specialised in polymer NMR will find the book a valuable dictionary of proven methodologies, as well as a guide to the very latest developments in the subject. Workers from all of the main branches of polymer NMR have been invited to contribute. Each chapter therefore contains information relating to a parti cular investigative topic, indentified mainly on the basis of technique. The book is loosely divided between solution and solid-state domains, although the numerous interconnections confirm that these two domains are parts of the same continuum. Basic principles are explained within each chapter, combined with discussions of experimental theory and applications. Examples of polymer investigations are covered generously and in many chapters there are discussions of the most recent theoretical and experimental developments.

Download or read book NMR Spectra of Polymers and Polymer Additives written by Anita J. Brandolini and published by CRC Press. This book was released on 2000-05-12 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Compiles nearly 400 fully assigned NMR spectra of approximately 300 polymers and polymer additives, representing all major clases of materials: polyolefins, styrenics, acrylates, methacrylates, vinyl polymers, elastomers, polyethers, polyesters, polymides, silicones, cellulosics, polyurethanes, plasticizers, and antioxidants."

Download or read book NMR Spectroscopy of Polymers written by H.N. Cheng and published by OUP USA. This book was released on 2012-04-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes review and papers on the latest advances by acknowledged leaders and active researchers in nuclear magnetic resonance (NMR) spectroscopy

Download or read book Polymer Characterisation written by B.J. Hunt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers continue to play an ever increasing role in the modern world. In fact it is quite inconceivable to most people that we could ever have existed of the increased volume and variety of materials without them. As a result currently available, and the diversity of their application, characterisation has become an essential requirement of industrial and academic laboratories in volved with polymeric materials. On the one hand requirements may come from polymer specialists involved in the design and synthesis of new materials who require a detailed understanding of the relationship between the precise molecular architecture and the properties of the polymer in order to improve its capabilities and range of applications. On the other hand, many analysts who are not polymer specialists are faced with the problems of analysing and testing a wide range of polymeric materials for quality control or material specification purposes. We hope this book will be a useful reference for all scientists and techno or industrial laboratories, logists involved with polymers, whether in academic and irrespective of their scientific discipline. We have attempted to include in one volume all of the most important techniques. Obviously it is not possible to do this in any great depth but we have encouraged the use of specific examples to illustrate the range of possibilities. In addition numerous references are given to more detailed texts on specific subjects, to direct the reader where appropriate. The book is divided into II chapters.

Download or read book A Practical Guide to Understanding the NMR of Polymers written by Peter A. Mirau and published by Wiley-Interscience. This book was released on 2005 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Understanding the NMR of Polymers presents an introduction to the theory and practice of NMR, and includes sections on the fundamental principles of NMR and the applications to polymers. This book will help readers understand how these methods can be used to determine the chemical structure of polymers that influences the macroscopic properties. Solid state NMR methods are introduced to enable the readers to measure the structure of polymers on longer length scales. It is also shown how NMR is used to measure the molecular dynamics that can be related to the mechanical properties of polymers.

Download or read book NMR of Polymers written by Frank A. Bovey and published by Academic Press. This book was released on 1996-11-19 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: NMR has made important contributions to our understanding of structure–property relationships in polymers. This book provides an up-to-date and comprehensive overview of the fundamentals of NMR, with applications of multidimensional NMR and the new solution and solid-state methods in polymer science. NMR of Polymers is written by leading authorities for graduate students and professionals in academia and industry. Provides comprehensive overview of NMR in Polymer Science Covers multidimensional NMR Includes new solution and solid state methods Addresses chain conformation and dynamics

Download or read book Introduction to Polymers Third Edition written by Robert J. Young and published by CRC Press. This book was released on 2011-06-27 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, Introduction to Polymers, Third Edition presents the science underpinning the synthesis, characterization and properties of polymers. The material has been completely reorganized and expanded to include important new topics and provide a coherent platform for teaching and learning the fundamental aspects of contemporary polymer science. New to the Third Edition Part I This first part covers newer developments in polymer synthesis, including ‘living’ radical polymerization, catalytic chain transfer and free-radical ring-opening polymerization, along with strategies for the synthesis of conducting polymers, dendrimers, hyperbranched polymers and block copolymers. Polymerization mechanisms have been made more explicit by showing electron movements. Part II In this part, the authors have added new topics on diffusion, solution behaviour of polyelectrolytes and field-flow fractionation methods. They also greatly expand coverage of spectroscopy, including UV visible, Raman, infrared, NMR and mass spectroscopy. In addition, the Flory–Huggins theory for polymer solutions and their phase separation is treated more rigorously. Part III A completely new, major topic in this section is multicomponent polymer systems. The book also incorporates new material on macromolecular dynamics and reptation, liquid crystalline polymers and thermal analysis. Many of the diagrams and micrographs have been updated to more clearly highlight features of polymer morphology. Part IV The last part of the book contains major new sections on polymer composites, such as nanocomposites, and electrical properties of polymers. Other new topics include effects of chain entanglements, swelling of elastomers, polymer fibres, impact behaviour and ductile fracture. Coverage of rubber-toughening of brittle plastics has also been revised and expanded. While this edition adds many new concepts, the philosophy of the book remains unchanged. Largely self-contained, the text fully derives most equations and cross-references topics between chapters where appropriate. Each chapter not only includes a list of further reading to help readers expand their knowledge of the subject but also provides problem sets to test understanding, particularly of numerical aspects.

Download or read book Structural Studies of Polymers by Solution Nmr written by H.N. Cheng and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solution-state NMR spectroscopy is generally regarded as the premier technique to characterise polymer structure. This report provides a timely review of the developments in the NMR of polymers in solution in the past few years. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.

Download or read book Spectroscopy of Polymers written by J.L. Koenig and published by Elsevier. This book was released on 1999-09-16 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated Second Edition of the best-selling reference/text is essential reading for students and scientists who seek a thorough and practical introduction to the field of polymer spectroscopy. Eleven chapters cover the fundamental aspects and experimental applications of the primary spectroscopic methods. The advantages and disadvantages of the various techniques for particular polymer systems are also discussed. The goal of the author is not to make the reader an expert in the field, but rather to provide enough information about the different spectroscopic methods that the reader can determine how the available techniques can be used to solve a particular polymer problem. This Second Edition contains new and updated information on techniques in IR and NMR, as well as an all-new chapter on Mass Spectrometry.

Download or read book Handbook of Textile Fibre Structure written by Stephen Eichhorn and published by Elsevier. This book was released on 2009-10-19 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their complexity and diversity, understanding the structure of textile fibres is of key importance. This authoritative two-volume collection provides a comprehensive review of the structure of an extensive range of textile fibres.Volume 1 begins with an introductory set of chapters on fibre structure and methods to characterise fibres. The second part of the book covers the structure of manufactured polymer fibres such as polyester, polyamides, polyolefin, elastomeric and aramid fibres as well as high-modulus, high-tenacity polymer fibres. Chapters discuss fibre formation during processing and how this affects fibre structure and mechanical properties. A companion volume reviews natural, regenerated, inorganic and specialist fibres.Edited by leading authorities on the subject and with a team of international authors, the two volumes of the Handbook of textile fibre structure is an essential reference for textile technologists, fibre scientists, textile engineers and those in academia. - The first title of a authoritative two-volume collection that provides a comprehensive review of the structure of a range of textile fibres - Provides an overview of the development of fibre structure and methods to characterise fibres - Examines the structure of both traditional and new fibres and natural and manufactured fibres

Download or read book Fundamentals of Polymerization written by Broja Mohan Mandal and published by World Scientific. This book was released on 2013 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last twenty years, the field of the chemistry of polymerization witnessed enormous growth through the development of new concepts, catalysts, processes etc. Examples are: non classical living polymerizations (group transfer polymerization, living carbocationic polymerization, living radical polymerization and living ring-opening metathesis polymerization (ROMP)); new catalysts (metallocenes and late transition metal catalysts for stereospecific polymerization, Schrock and Grubbs catalyst for ROMP among others) and new processes such as miniemulsion, microemulsion polymerization and dispersion polymerization (in polar solvents). Apart from the developments in the chemistry of polymerization, methods have been developed for the evaluation of highly reliable rate constants of propagation in radical as well as cationic polymerization. All these have revolutionized the field of synthetic polymer chemistry. In the book, fundamentals of both the new and old polymerization chemistry have been dealt with. The new chemistry has been given nearly equal space along with the old.

Download or read book The Chemistry of Radical Polymerization written by Graeme Moad and published by Elsevier. This book was released on 2006 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commences with a general introduction outlining the basic concepts of radical polymerization. This is followed by a chapter on radical reactions that is intended to lay the theoretical ground-work for the succeeding chapters on initiation, propagation and termination.

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)

Download or read book Stereoselective Polymerization with Single Site Catalysts written by Lisa S. Baugh and published by CRC Press. This book was released on 2007-11-29 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: New synthetic techniques allow chemists to modify polymer microstructures more precisely than ever, making it possible to design materials that meet increasingly demanding performance requirements. Written and edited by experts in the field, Stereoselective Polymerization with Single-Site Catalysts reviews how the relative stereochemistry of

Download or read book Developments in Polymer Characterisation written by J. V. Dawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The policy adopted in Volume 1 of this series of including a relatively small number of topics for detailed review has been continued here. The techniques selected have received considerable attention in recent years. F or this reason and because of the significance of the characterisation data, further coverage of 13C nuclear magnetic resonance spectroscopy and small angle neutron scattering is given in the first two chapters. In Chapter I a large part of the review describes the determination of monomer sequence distributions and configurational sequences in copolymers formed from more than one polymerisable monomer. The review on neutron scattering (Chapter 2) is directed towards the determination of the chain conformation in semi-crystaIIine polymers, which has provided important results for the interpretation of chain folding and morphology in crystaIIisable polymers. Laser Raman spectroscopy has also been used for morphological studies, and this application together with a description of the theoretical and experimental aspects of the technique is given in Chapter 3. X-ray photoelectron spectroscopy because of its extreme sensitivity to surface characteristics has provided information on polymeric solids that could not be obtained by other techniques. The principles and practice of this ESCA technique, including its use for simple elemental analysis, structural elucidation and depth profiling, are described in Chapter 4. The final two chapters are mainly concerned with the chain conformation of polymers in dilute solution. Ultrasonic techniques (Chapter 5) show pmmise for observing the dynamics of conformational changes.