Download or read book Nitrogen Removal Processes for Wastewater Treatment written by Edris Hoseinzadeh and published by Bentham Science Publishers. This book was released on 2019-07-03 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitrogen containing compounds produced by industrial processes are pollutants which pose a significant environmental and health hazard. There are a number of processes that have been devised for removing nitrogen compounds from wastewater. This reference book summarizes different denitrification methods for wastewater processing. The book introduces readers to toxic nitrogen compounds responsible for water pollution. This introduction is followed by chapters which explain different nitrogen removal methods including conventional methods, biological methods, food industry wastewater treatment and new approaches towards environmental pollution remediation: Bio Electrochemical Systems (BESs). This book is a handy reference guide for industrial and environmental engineers and students learning about wastewater management and industrial denitrification.
Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioelectrochemical Systems written by Korneel Rabaey and published by IWA Publishing. This book was released on 2009-12-01 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of wastewater treatment, Bioelectrochemical Systems (BESs) have gained considerable interest in the past few years, and several BES processes are on the brink of application to this area. This book, written by a large number of world experts in the different sub-topics, describes the different aspects and processes relevant to their development. Bioelectrochemical Systems (BESs) use micro-organisms to catalyze an oxidation and/or reduction reaction at an anodic and cathodic electrode respectively. Briefly, at an anode oxidation of organic and inorganic electron donors can occur. Prime examples of such electron donors are waste organics and sulfides. At the cathode, an electron acceptor such as oxygen or nitrate can be reduced. The anode and the cathode are connected through an electrical circuit. If electrical power is harvested from this circuit, the system is called a Microbial Fuel Cell; if electrical power is invested, the system is called a Microbial Electrolysis Cell. The overall framework of bio-energy and bio-fuels is discussed. A number of chapters discuss the basics – microbiology, microbial ecology, electrochemistry, technology and materials development. The book continues by highlighting the plurality of processes based on BES technology already in existence, going from wastewater based reactors to sediment based bio-batteries. The integration of BESs into existing water or process lines is discussed. Finally, an outlook is provided of how BES will fit within the emerging biorefinery area.
Download or read book Phosphorus and Nitrogen Removal from Municipal Wastewater written by Richard I. Sedlak and published by CRC Press. This book was released on 1991-10-07 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable new book offers practical guidance regarding the design and operation of systems for reducing effluent nitrogen and phosphorus. The principles of nitrogen and phosphorus removal are discussed, including sources of nitrogen and phosphorus in wastewater, removal options, nitrogen and phosphorus transformations in treatment, process selection, and treatment. The book also covers the design and operation of nitrogen and phosphorus removal systems, including system options, system design, facility design, facility costs, and operation. Practical case studies are provided as examples of successful system implementations that may be able to help you decide what will work best in your plant.
Download or read book Nitrogen Removal from Municipal Wastewater written by Matti Valve and published by Nordic Council of Ministers. This book was released on 1995 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical chemical Nitrogen Removal Wastewater Treatment written by Gordon L. Culp and published by . This book was released on 1974 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes 3 basic physical-chemical nitrogen-removal techniques available for application in wastewater treatment plants and discusses advantages and disadvantages of each process. Techniques include: ammonia stripping, selective ion exchange, and breakpoint chlorination.
Download or read book The Combined Sharon Anammox Process written by L. G. J. M. van Dongen and published by IWA Publishing. This book was released on 2001-09-30 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment management, alongside many other industries, is seeking to attain a higher degree of sustainability for its processes by focusing on new technologies which minimise the consumption of resources or even recover them from the wastewater. Conventional removal of ammonium requires usually large amounts of energy for aeration and organic carbon for denitrification. This report focuses on making the nitrogen-removal process more sustainable. This can be achieved by a partial oxidation of ammonium to nitrite, after which the nitrate produced can be converted into nitrogen gas with the rest of ammonium under anoxic conditions. The treatment of nitrogen-rich water can be carried out beneficially by a combination of the Sharon process with the Anammox process. In this combined process less than 50% of the aeration energy is needed, no COD is required and an insignificant amount of sludge is produced. In this Report the potential of using this technology for the treatment of water arising from sludge treatment at a municipal wastewater treatment plant (WWTP) is evaluated and the results of the operation of the system are described in detail. This reject water contains a significant fraction of the N-load towards the wastewater treatment plant. The results are used in an economic evaluation of a potential full scale installation. The Combined Sharon/Anammox Process Report will provide an invaluable source of information for all those concerned with the efficient and sustainable treatment of wastewater including plant managers, process designers, consultants and researchers.
Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9
Download or read book Microbial Electrochemical Technologies written by Sonia M. Tiquia-Arashiro and published by CRC Press. This book was released on 2020-01-06 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the most updated and recent account of research and implementation of Microbial Electrochemical Technologies (METs) from pioneers and experienced researchers in the field who have been working on the interface between electrochemistry and microbiology/biotechnology for many years. It provides a holistic view of the METs, detailing the functional mechanisms, operational configurations, influencing factors governing the reaction process and integration strategies. The book not only provides historical perspectives of the technology and its evolution over the years but also the most recent examples of up-scaling and near future commercialization, making it a must-read for researchers, students, industry practitioners and science enthusiasts. Key Features: Introduces novel technologies that can impact the future infrastructure at the water-energy nexus. Outlines methodologies development and application of microbial electrochemical technologies and details out the illustrations of microbial and electrochemical concepts. Reviews applications across a wide variety of scales, from power generation in the laboratory to approaches. Discusses techniques such as molecular biology and mathematical modeling; the future development of this promising technology; and the role of the system components for the implementation of bioelectrochemical technologies for practical utility. Explores key challenges for implementing these systems and compares them to similar renewable energy technologies, including their efficiency, scalability, system lifetimes, and reliability.
Download or read book The Removal of Nitrogen Compounds from Wastewater written by B. Halling-Sørensen and published by Elsevier. This book was released on 1993-11-09 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gives an overview of the wide spectrum of nitrogen removal processes available today. Part A gives a brief outline of nitrogen pollution sources, the global nitrogen cycle and the treatment methods; part B presents details of all biological methods for nitrogen removal; and part C describes the physico-chemical nitrogen removal methods. Design examples relating to parts B and C are given in appendices. Design equations are given in the text, but more emphasis has been placed on the profound understanding of the biological and chemical processes and the basic factors that influence these. Parameters and regression equations for a quantitive description of these factors and their influence on the key processes are presented in several tables. This feature makes the volume a very useful handbook; it will be of great value to those environmentalists who require a record of the available nitrogen removal methods from both biological and chemical viewpoints.
Download or read book Nitrification and Denitrification in the Activated Sludge Process written by Michael H. Gerardi and published by John Wiley & Sons. This book was released on 2003-03-19 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitrification and Denitrification in the Activated Sludge Process, the first in a series on the microbiology of wastewater treatment, comprises the critical topics of cost-effective operation, permit compliance, process control, and troubleshooting in wastewater treatment plants. Avoiding the technical jargon, chemical equations, and kinetics that typically accompany such texts, Nitrification and Denitrification in the Activated Sludge Process directly addresses plant operators and technicians, providing necessary information for understanding the microbiology and biological conditions that occur in the treatment process. Of special interest to wastewater treatment plant operators are the bacteria that degrade nitrogenous wastes–the nitrifying bacteria–and the bacteria that degrade carbonaceous wastes–the cBOD-removing bacteria. Both groups of bacteria need to be routinely monitored and operational conditions favorably adjusted to ensure desired nitrification. Each chapter in this groundbreaking study offers a better understanding of the importance of nitrification and denitrification and the bacteria involved in these crucial processes. Chapters include: Organotrophs The Wastewater Nitrogen Cycle Nitrite Ion Accumulation Dissolved Oxygen Denitrifying Bacteria Gaseous End Products Free Molecular Oxygen The Occurrence of Denitrification
Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Retrofit of Wastewater Treatment Plants for Biological Nutritient Removal written by Clifford W. Randall and published by CRC Press. This book was released on 1998-05-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents information that can be used for the design and operation of wastewater treatment plants that utilize biological nutrient removal processes, i.e., processes that utilize biological mechanisms instead of chemical mechanisms, to remove phosphorus and nitrogen from wastewaters. The book provides: basic fundamentals, concepts, and theories; design of prefermentation units, various types of BNR systems, and secondary clarifiers; retrofitting conventional activated sludge plants; modeling considerations; and special considerations for BNR systems. It includes full-scale and pilot plant case histories, design examples, and retrofit of existing plants.
Download or read book Phosphorus and Nitrogen Removal from Municipal Wastewater written by RichardI. Sedlak and published by Routledge. This book was released on 2018-04-27 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable new book offers practical guidance regarding the design and operation of systems for reducing effluent nitrogen and phosphorus. The principles of nitrogen and phosphorus removal are discussed, including sources of nitrogen and phosphorus in wastewater, removal options, nitrogen and phosphorus transformations in treatment, process selection, and treatment. The book also covers the design and operation of nitrogen and phosphorus removal systems, including system options, system design, facility design, facility costs, and operation. Practical case studies are provided as examples of successful system implementations that may be able to help you decide what will work best in your plant.
Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.
Download or read book Process Optimization of an On site Wastewater Treatment System for Nitrogen Removal written by Brian Robert Blicker and published by . This book was released on 1997 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nutrient Removal WEF MOP 34 written by Water Environment Federation and published by McGraw-Hill Education. This book was released on 2010-10-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.The Latest Methods for Nutrient Removal from Wastewater This Water Environment Federation resource provides comprehensive information on biological and chemical methods for nitrogen and phosphorus removal from wastewater. Nutrient Removal covers environmental and regulatory issues and provides an integrated approach for combined nitrogen and phosphorus removal, including details on ammonia and dewatering liquors treatment. Natural treatment systems are also discussed in this definitive guide. Nutrient Removal covers: Nutrients and their effects on the environment Regulation of nutrients in the effluents of wastewater treatment plants Overview of the nutrient removal processes Principles of biological nitrogen removal Nitrification Nitrogen removal processes, configuration, and process-sizing criteria for combined nitrification and denitrification processes Chemical and biological phosphorus removal Sidestream nitrogen removal Structured process models for nutrient removal Troubleshooting for full-scale nutrient removal facilities Aquatic natural treatment systems