Download or read book Ninth International Conference on Rapidly Quenched and Metastable Materials 25 30 August 1996 Bratislava Slovakia written by P. Duhaj and published by . This book was released on 1997 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Download or read book Rapidly Quenched Metastable Materials written by P. Duhaj and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ninth International Conference on Rapidly Quenched and Metastable Materials written by International Conference on Rapidly Quenched and Metastable Materials (9, 1996, Bratislava) and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials World written by and published by . This book was released on 1996 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Ninth International Conference on Rapidly Quenched and Metastable Materials written by International Conference on Rapidly Quenched and Metastable Materials. 9, 1996, Bratislava and published by . This book was released on 1997 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Ninth International Conference on Rapidly Quenched and Metastable Materials written by and published by . This book was released on 1997 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Induced Amorphization of Materials written by Surinder M. Sharma and published by . This book was released on 1996 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Ninth International Conference on Rapidly Quenched and Metastable Materials written by Pavol Duhaj and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 9 International Conference on Rapidly Quenched and Metastable Materials written by and published by . This book was released on 1996 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ninth International Conference on Rapidly Quenched and Metastable Materials written by P. Duhaj and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopy and Analysis written by and published by . This book was released on 1995 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metastable Mechanically Alloyed and Nanocrystalline Materials written by Jürgen Eckert and published by . This book was released on 2000 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books reports exciting new research results in the area of bulk metallic glasses and bulk nanocrystalline materials prepared by severe plastic deformation. Other major topics include synthesis and processing of metals, intermetallics and oxides, polymers, nanocomposites and others by different techniques, including mechanosynthesis and mechanochemistry. Also covered are the structural characterization of nanophase materials and the structural evolution caused by mechanical treatment.
Download or read book Frontiers in Materials Modelling and Design written by Vijay Kumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is about fifteen years since we started hearing about Computational Ma terials Science and Materials Modelling and Design. Fifteen years is a long time and all of us realise that the use of computational methods in the design of materials has not been rapid enough. We also know the reasons for this. Mate rials properties are not dependent on a single phenomenon. The properties of materials cover a wide range from electronic, thermal, mechanical to chemical and electro-chemical. Each of these class of properties depend on specific phe nomenon that takes place at different scales or levels of length from sub atomic to visible length levels. The energies controlling the phenomena also varies widely from a fraction of an electron volt to many joules. The complexity of materials are such that while models and methods for treating individual phenomenon have been perfected, incorporating them into a single programme taking into account the synergism is a formidable task. Two specific areas where the progress has been very rapid and substantive are prediction of phase stability and phase diagrams and embrittlement of steels by metalloids. The first three sections of the book contain papers which review the theoreti cal principles underlying materials modeling and simulations and show how they can be applied to the problems just mentioned. There is now a strong interest in designing new materials starting from nanoparticles and clusters.
Download or read book Advances in Planar Lipid Bilayers and Liposomes written by Ales Iglic and published by Academic Press. This book was released on 2012-09-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Planar Lipid Bilayers and Liposomes volumes cover a broad range of topics, including main arrangements of the reconstituted system, namely planar lipid bilayers as well as spherical liposomes. The invited authors present the latest results of their own research groups in this exciting multidisciplinary field. Incorporates contributions from newcomers and established and experienced researchers Explores the planar lipid bilayer systems and spherical liposomes from both theoretical and experimental perspectives Serves as an indispensable source of information for new scientists
Download or read book Photovoltaic and Photoactive Materials written by Joseph M. Marshall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.
Download or read book Metallic Materials with High Structural Efficiency written by Oleg N. Senkov and published by Springer Science & Business Media. This book was released on 2004-06-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 1998, Prof. Sergey Firstov invited me to the Frantcevych Institute for Problems of Materials Science (IPMS) in Kyiv, Ukraine to discuss possible collaborations in the area of advanced metals research. During this visit, a strong mutual interest was evident in a broad range of structural metals technologies, and a quick friendship was established. Countless subsequent emails and a reciprocal visit to the U. S Air Force Research Laboratory by Prof. Firstov and a team of scientists from IPMS ensued to discuss and detail a broad collaboration in the area of structural metals. Two years after the initial visit, a major investment by the U. S. Air Force Office of Scientific Research (AFOSR) was established to pursue the technologies defined by these interactions. The annual reviews of the AFOSR Ukrainian Metals Initiative were held in late May, a most beautiful time in Kyiv when the lilacs are in bright display and the air is scented with the smell of falling blossoms from the chestnut trees that line the major streets and many parks. The sunny days and mild evenings provide a welcome break from winter, and on weekend evenings festive crowds spill onto the Khreshchatyk, Kyiv’s downtown boulevard, to listen to street musicians, watch jugglers and comedians, or simply to celebrate with friends. The annual reviews featured long days of intensive discussion of technical progress, followed in the evenings by the warm hospitality of the Ukrainian hosts.
